DeWalt DCR002 Original Instructions Manual

DCR002

Dansk (oversat fra original brugsvejledning) 3

Deutsch (übersetzt von den originalanweisungen) 14

English (original instructions) 26

Español (traducido de las instrucciones originales) 37

Français (traduction de la notice d’instructions originale) 48

Italiano (tradotto dalle istruzioni originali) 60

Nederlands (vertaald vanuit de originele instructies) 71

Norsk (oversatt fra de originale instruksjonene) 83

Português (traduzido das instruções originais) 94

Suomi (käännetty alkuperäisestä käyttöohjeesta) 106

Svenska (översatt från de ursprungliga instruktionerna) 117

Türkçe (orijinal talimatlardan çevrilmiştir) 128

Ελληνικά (μετάφραση από τις πρωτότυπες οδηγίες) 139

Figure 1

Figure 2

AUX

Figure 3

English

BLUETOOTH

RADIO ADAPTER

DCR002

Congratulations!

You have chosen a DeWALT unit. Years of experience, thorough product

development and innovation make DeWALT one of the most reliable

partners for professional power tool users.

Technical Data

DCR002

Battery type Integral Li-ion

Charger current mA 300

Charger output voltage V 5

Weight kg 0,027

Deﬁnitions: Safety Guidelines

The definitions below describe the level of severity for each signal word.

Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently

hazardous situation which, if not avoided, will result in death

or serious injury.

WARNING: Indicates a potentially hazardous situation which,

if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which,

if not avoided, may result in minor or moderate injury.

NOTICE: Indicates a practice not related to personal

injury which, if not avoided, may result in property

damage.

Denotes risk of electric shock.

Denotes risk of fire.

English (original instructions)

English

The Bluetooth

word mark and logos are registered trademarks owned

by the Bluetooth

, SIG, Inc. and any use of such marks by DeWALT

is under license. Other trademarks and trade names are those of their

respective owners.

WARNING: To reduce the risk of injury, read the instruction

manual.

General Safety Warnings

WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warningS and inStructionS

for future reference

• DONOTsplashorimmerseinwaterorotherliquids.

• DONOTstoreoruseinlocationswherethetemperaturemay

reach or exceed 40.5 °C (105 °F) (such as outside sheds or metal

buildings in summer). For best life store in a cool, dry location.

• DONOTincinerateevenifseverelydamagedorcompletelyworn

out. The battery can explode in a fire. Toxic fumes and materials

are created when lithium ion batteries are burned.

• Ifbatterycontentscomeintocontactwiththeskin,immediately

washareawithmildsoapandwater.Ifbatteryliquidgetsintothe

eye, rinse water over the open eye for 15 minutes or until irritation

ceases. If medical attention is needed, the battery electrolyte is

composedofliquidorganiccarbonatesandlithiumsalts.

• Contentsofopenedbatterymaycauserespiratoryirritation.

Provide fresh air. If symptoms persist, seek medical attention.

• Burnhazard.Batteryliquidmaybeflammableifexposedtospark

or flame.

• Firehazard.Neverattempttoopenforanyreason.Ifthehousing

is cracked or damaged, do not charge. Do not crush, drop

or damage. Do not use if it has received a sharp blow, been

dropped, run over or damaged in any way (e.g. pierced with

a nail, hit with a hammer, stepped on). Damaged Bluetooth

adapters should be returned to the service center for recycling.

• Pleasenotethatchangesormodificationsnotexpresslyapproved

by the party responsible for compliance could void the user’s

authoritytooperatetheequipment.

English

Additional Speciﬁc Safety Rules for Bluetooth

Radio Adapter

WARNING: Observe all operating instructions and safety

regulations contained in the manual for the Bluetooth

device

and work site radio the adapter is used with.

• Donotstorethedeviceincoldareas.Whenthedevicereturnsto

its normal temperature, moisture can form inside the device and

damage electronic circuit boards.

• Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of battery

pack may create a risk of fire when used with another battery

pack.

• Neveruseanychargerthatisdamagedoranunapprovedcharger

may present a risk of fire, explosion, leakage, or other hazard.

Markings on Bluetooth

Radio Adapter

The following pictograms are shown on the adapter:

Read instruction manual before use.

Package Contents

The package contains:

1 Bluetooth radio adapter

1 Mounting/storage clip

1 Velcro adhesive

1 USB charging cable

1 Instruction manual

 • Checkfordamagetotheunit,partsoraccessorieswhichmayhave

occurred during transport.

 • Takethetimetothoroughlyreadandunderstandthismanualpriorto

operation.

English

Description (ﬁg. 1)

WARNING: Nevermodifytheunitoranypartofit.Damage

or personal injury could result.

a. Control button

b. LED Indicator

c Charging port

d. 3.5mm right angle audio plug

e. Mounting clip

f. Adhesive strip

INTENDED USE

The

DeWALT Bluetooth

radio adapter is designed to enable a worksite

radio or other audio device to accept a Bluetooth

signal from a mobile

phone or other device with Bluetooth

audio functionality.

DO NOT use under wet conditions or in the presence of flammable

liquids or gases.

DO NOT let children come into contact with the unit. Supervision is

required when inexperienced operators use this unit.

 • Young children and the infirm. This appliance is not intended for

use by young children or infirm persons without supervision.

 • Thisproductisnotintendedforusebypersons(includingchildren)

suffering from diminished physical, sensory or mental abilities; lack

of experience, knowledge or skills unless they are supervised by

a person responsible for their safety. Children should never be left

alone with this product.

OPERATION

Instructions for Use

WARNING: Always observe the safety instructions and

applicable regulations.

NOTICE: It is recommended to fully charge the unit before

using it for the first time.

English

Charging the Adapter

The DCR002 has an internal, non-removable, rechargeable battery. Do

not attempt to remove the battery from the device as you may damage

the device.

To charge the unit, connect the USB charging cable into the charging

port (c) on the unit and then plug it in to an appropriate USB port.

Longest life and best performance can be obtained if the battery

pack is charged when the air temperature is between 18° and 24°C

(65°F –75°F). DO NOT charge the battery pack in an air temperature

below +4.5°C (+40°F), or above +40.5°C (+105°F ). This is important

and will prevent serious damage to the battery pack.

NOTE: While the unit is charging, the LED indicator (b) will be on solid

red. If playing music while charging the LED will alternate red and blue.

When charging is complete, the red LED indicator will be off. When the

unit needs to be charged the LED indicator will flash red once every 20

seconds. The Bluetooth

device will fully recharge in 4 hours or less.

Functionality

TURNING THE ADAPTER ON AND OFF

To power the adapter on press and hold the control button (a) for 4

seconds. The LED indicator will flash blue for 3 seconds indicating the

unit is on.

To power the adapter off press and hold the control button for 4 seconds.

The LED indicator will flash red for 3 seconds indicating the unit is

powering off.

PAIRING THE ADAPTER WITH A BLUETOOTH

AUDIO DEVICE (FIG. 1)

1. Place the adapter and the Bluetooth

audio source within one metre

of each other.

2. With adapter off, press and hold the control button (a) for 8-9

seconds until the LED (b) rapidly flashes red and blue. This puts the

adapter in pairing mode lasting for 2 minutes.

English

3. Activate the Bluetooth

search function of your audio device or

mobile phone. Once the adapter is found (will appear as: DeWALT

Adapter DCR002) confirm pairing on your device. Once pairing is

successful the rapid red/blue flashing of the LED will cease and the

indicator will flash blue once every 5 seconds. If paired successfully,

your audio device should now be able to connect with the adapter.

Consult with your device’s owners manual for details on pairing and

connecting.

ADAPTER STATUS INDICATOR

LED indicator Status

Flashes red and blue rapidly Adapter is in pairing mode.

Flashes blue once every 2

seconds

Adapter is in standby mode and

not connected.

Flashes blue once every 5

seconds

Adapter is paired with a device.

Flashes red once every 20

seconds

Adapter’s battery is low and

needs to be charged.

Flashes red and blue alternately Adapter is charging while

connected to an audio device

Solid red light Adapter is charging

CONNECTING AND MOUNTING THE ADAPTER TO A WORKSITE RADIO (FIG. 2, 3)

The Bluetooth

adapter is compatible with all DeWALT work site radios,

most non-DeWALT work site radios and other audio devices with a

standard 3.5mm audio in jack.

The Bluetooth

adapter can be mounted and stored on a work site radio

or other speaker by mounting the adapter storage clip (e) to the radio.

Being mindful of the adapter’s cord length in relation to your radio’s audio

jack, apply the adhesive strips (f) provided on the back of the storage clip

and to a flat surface on your radio, refer to figure 3. Slide the adapter into

the storage clip and connect the 3.5 mm audio plug (d). Remove adapter

from clip for charging if necessary.

English

Important Bluetooth

Adapter Notes

1. When receiving a phone call on a mobile phone which is streaming

to the Bluetooth

adapter, the music will automatically pause.

2. The unit can be used while charging, but if the charging connection

is established while in use, plugging in the unit will turn it off and the

unit will need to be turned back on and possibly reconnected.

2. Optimum Bluetooth

streaming range is roughly 9 m (line of sight)

to the adapter but distances up to 30 m are possible. Physical

obstacles, other wireless devices or electromagnetic devices may

affect the connection quality.

NOTE: If Bluetooth

connection is lost due to a time of separation

exceeding the optimum distance, obstacles or otherwise

reconnecting your device with the adapter may be necessary.

3. Due to the characteristics of Bluetooth

technology, the sound heard

through the work site radio is slightly delayed from the sound played

on your audio device or mobile phone while talking on a phone call

or streaming music.

MAINTENANCE

Your DeWALT unit has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory operation

depends upon proper unit care and regular cleaning.

The internal battery is not serviceable.

Lubrication

Your unit requires no lubrication.

English

Cleaning

WARNING: Neverusesolventsorotherharshchemicalsfor

cleaning the non-metallic parts of the unit. These chemicals

may weaken the materials used in these parts. Use a cloth

dampenedonlywithwaterandmildsoap.Neverletany

liquidgetinsidetheunit;neverimmerseanypartofthe

Bluetooth

radio adapterintoaliquid.

Optional Accessories

WARNING: Since accessories, other than those offered by

DeWALT, have not been tested with this product, use of such

accessories with this unit could be hazardous. To reduce the

risk of injury, only DeWALT recommended accessories should

be used with this product.

Consult your dealer for further information on the appropriate accessories.

Protecting the Environment

Separate collection. This product must not be disposed of

with normal household waste.

Should you ﬁnd one day that your DeWALT product needs replacement,

or if it is of no further use to you, do not dispose of it with household

waste. Make this product available for separate collection.

Separate collection of used products and packaging allows

materials to be recycled and used again. Re-use of recycled

materials helps prevent environmental pollution and reduces

the demand for raw materials.

Local regulations may provide for separate collection of electrical

products from the household, at municipal waste sites or by the retailer

when you purchase a new product.

English

DeWALT provides a facility for the collection and recycling of DeWALT

products once they have reached the end of their working life. To take

advantage of this service please return your product to any authorised

repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by

contacting your local DeWALT office at the address indicated in this

manual. Alternatively, a list of authorised DeWALT repair agents and full

details of our after-sales service and contacts are available on the Internet

at: www.2helpU.com.

English

GUARANTEE

DeWALT is confident of the quality of its products and offers an

outstanding guarantee for professional users of the product. This

guarantee statement is in addition to and in no way prejudices

your contractual rights as a professional user or your statutory

rights as a private non-professional user. The guarantee is valid

within the territories of the Member States of the European Union

and the European Free Trade Area.

• 30 DAY NO RISK SATISFACTION GUARANTEE •

If you are not completely satisfied with the performance of your

eWALT tool, simply return it within 30 days, complete with all

original components, as purchased, to the point of purchase, for

a full refund or exchange. The product must have been subject to

fair wear and tear and proof of purchase must be produced.

• ONE YEAR FREE SERVICE CONTRACT •

If you need maintenance or service for your D

eWALT tool, in the

12 months following purchase, you are entitled to one service free

of charge. It will be undertaken free of charge at an authorised

DeWALT repair agent. Proof of purchase must be produced.

Includes labour. Excludes accessories and spare parts unless

failed under warranty.

•ONE YEAR FULL WARRANTY •

If your D

eWALT product becomes defective due to faulty materials

or workmanship within 12 months from the date of purchase,

DeWALT guarantees to replace all defective parts free of charge or

– at our discretion – replace the unit free of charge provided that:

 • Theproducthasnotbeenmisused;

 • Theproducthasbeensubjecttofairwearandtear;

 • Repairshavenotbeenattemptedbyunauthorisedpersons;

 • Proofofpurchaseisproduced;

 • Theproductisreturnedcompletewithalloriginal

components.

English

If you wish to make a claim, contact your seller or check the

location of your nearest authorised DeWALT repair agent in the

DeWALT catalogue or contact your DeWALT office at the address

indicated in this manual. A list of authorised DeWALT repair agents

and full details of our after-sales service is available on the Internet

at: www.2helpU.com.

DeWalt DCR002 Original Instructions Manual

Related papers