Quick Start Guide:-
1>Connect the power cable to the power socket of the TV.
2>Connect the antenna cable to the ANT connection of the TV.
3>Press the master on/off switch located the back of the TV on the
right hand bottom corner.
4>Put the batteries in the remote control.
5>Press the power button on the remote or on the side of the TV.
6>Select Auto Tuning from the start up window.
7>Press OK button from the remote.
8>Select Start button using the arrow buttons and press OK button on
the remote.
9>It will automatically tune all the analogue and digital channels for
you. Your TV is ready for use now.
i