ENGLISH
1
INSTALLATION
To prevent malfunction and/or damage to speaker or other devices, always turn down the volume, and turn off
the power on all devices before making any connections.
(A) Connecting the speakers to the Subwoofer
For the five sets of wires included: use the White/Black wire to connect to the RED positive terminals and use
the black wire the BLACK negative terminals on the back of the subwoofer and speakers as explained below.
1. Connect the FR speaker to the OUTPUT-FRONT (R) spring tags of the subwoofer.
2. Connect the FL speaker to the OUTPUT-FRONT (L) spring tags of the subwoofer.
3. Connect the SR speaker to the OUTPUT-SURROUND (R) spring tags of the subwoofer.
4. Connect the SL speaker to the OUTPUT-SURROUND (L) spring tags of the subwoofer.
5. Connect the CEN speaker to the OUTPUT-CEN spring tags of the subwoofer.
(B) Connecting the Subwoofer to the Audio Sources
For the stereo RCA cables included: The (5.1) INPUT 1 jacks on the subwoofer are used for connecting a
5.1-channel device with front, surround, center, and subwoofer outputs, such as a DVD player.
One 2 x RCA to 3.5mm stereo cable: The 2-CH INPUT jacks on the subwoofer are used for connecting a
2-channel device, such as a TV, a CD, VCD, MP3 or GAME player (2-channel input with 6-channel output surround
sound effect)
MP3 decoding mode (Figure 1): Connect your USB storage device with a USB memory stick, SD or Micro SD
1. Make sure the music files are in MP3 format in the USB memory stick, SD or Micro SD storage device.
2. Insert the USB memory stick, SD or Micro SD into the correct socket, then wait for the blue LED to flash
quickly while it is searching for the files in the device.
3. When the blue LED flashes slowly, the speaker will start to play music.
4. If you have a USB memory stick, SD, and Micro SD inserted into the speaker at the same time, the system
will read and play the device which was inserted first. If you don’t want to hear that device, you must
remove it so the other device can play.
(C) Turn on the system
1. When you finish A and B, turn on the “Power Switch” on the back of subwoofer and then press “STANDBY”
to start the system.
2. Select the input source as DVD, TV/Game, CD, or USB/SD.
3. if the speaker is connected to a DVD player, TV, and CD/MP3 at the same time, the system will play music
from the selected INPUT device. The system will enter USB mode when you insert a USB memory stick, SD
or Micro SD, no matter if it was originally in DVD or TV mode.
ENGLISH
2
Front Panel Controller Function
1.
INPUT: Select different input source from DVD/TV/Game/CD/MP3
2.
: Sound off temporally
3.
CHANNEL: Choose different sound channel (Center / Master / Rear / Woofer / Front) to increase or decrease
volume level.
(Press CHANNEL to select the Center / Master / Rear / Woofer / Front, and then press the / to
adjust individual volume).
4.
STANDBY: Press to turn on/off the speaker system.
5.
-: Decrease Center / Master/Rear/Woofer/Front speakers volume
6.
: Increase Center / Master/Rear/Woofer/Front speakers volume.
7.
: In MP3 mode, press to skip to previous track; hold and press down the button to quickly skip through
previous tracks.
8.
: In MP3 mode, press to play or pause.
9.
: In MP3 mode, press to skip to next track; hold down the button to quickly fast forward through the
tracks.
Remote Control Function
1.
STANDBY: Turns the speaker system on/off the standby mode.
2.
DISPLAY: Press to turn on LCD monitor display
3.
MASTER: Press +/- to adjust all speakers volume
4.
WOOFER: Press +/- to adjust individual woofer speakers volume
5.
CEN: Press +/- to adjust individual Center speakers volume
6.
FRONT: Press +/- to adjust individual Front speakers volume
7.
REAR: Press +/- to adjust individual Center speakers volume
8.
DVD: Press to select DVD input source
9.
CD: Press to select CD input source
10.
AUX: Press to select AUX input source
11.
USB/SD: Press to select USB/SD input source.
12.
TV/GAME: Press to select TV/GAME input source
13.
: In MP3 mode, press to skip to previous track.
14.
:
In MP3 mode, press to skip to next track.
15.
: In MP3 mode, hold and press down the button to quickly skip
through previous tracks.
16.
: In MP3 mode, hold down the button to quickly fast forward
through the tracks.
17.
: In MP3 mode, press to play or pause.
18.
: Sound off temporally
Warning
1.
Do not connect the power plug into an AC outlet until all connections are made.
2.
Please remove AC power cord if you do not use this device for a long time.
3.
Do not expose the speakers to any dripping or splashing and make sure no object filled with liquids, such
as vases, etc., are placed on them.
4.
If you do NOT press the function button on the panel or remote control, the panel LED light will
automatically turn off in 10 seconds.
5.
When the system is in standby mode, the orange LED will stay on and the system will NOT work. Press
STANDBY button to start the system and the orange LED will turn off.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Sony DAV-SR4W User manual
-
-
-
-
-
LG HT303SUW User manual
-
Philips PDCC-JS-JW-0734 User manual
-
-
Denon DHT-500SD Operating Instructions Manual
-