PAGE 05MYO GESTURE CONTROL ARMBAND - LESSON ONE
PART 1: SETTING UP THE MYO ARMBAND
First, let’s review the items you have received:
• Myo Gesture Control Armband
• Standard Micro-USB Cable
• Bluetooth USB Adapter
• Myo Sizing Clips
The micro-USB cable is used to charge your Myo armband and update its rmware. You will also need
it to turn your Myo on if you have turned it o.
The USB Bluetooth adapter should be plugged into your Mac or Windows computer.
If you nd that your Myo armband does not t snugly on your forearm, Myo sizing clips will allow you
to adjust Myo for a secure and comfortable t on your forearm. Attach the sizing clips
1
to the rubber
ex in-between the pods.
PART 2: MYO CONNECT
Myo Connect allows you to connect your armband to your computer to access Myo guides,
personalization options, gesture recognition, and more. Download Myo Connect from myo.com/start
2
and install it on your computer.
On the rst launch of Myo Connect, the Getting Started Guide should open automatically. You can
access the Getting Started Guide at any time under Guides through the Myo Connect menu. This
guide will show you how to wear the Myo armband properly and how it works, in addition to leading
you through connecting and syncing.
The Getting Started Guide will introduce the ve basic gestures that Myo recognizes: Double Tap,
Fist, Finger Spread, Wave Right, and Wave Left. Once you reach the end of the guide, you are ready to
use the Myo armband!