IN-DASH 7 INCH TFT LCD MONITOR
INSTRUCTION MANUAL
1.Do not repair it by yourself ,if any trouble occurs ,please immediately shut it off and
contact our company or local dealer .This monitor is composed of many precise electronic
components ,any detachment or reassembling may result damages to the set.
2.Do not expose the monitor to humid air ,dust ,vapor ,sunlight ,etc.
3.Do not use thinner or any other chemical cleaner .Please choose soft cloth
4.Keep the monitor for extremely heating or cooling places.
o
Storage temperature :-25~+60 c
o
Operating temperature :-10-+50 c
5.Prevent the set from falling or struck
Thanks for your purchase of various displays produced by our company. In order to
take the full advantage of this unit and ensure its long-term trouble-free use, please
read and obey this manual carefully.
Caution
To ensure security ,please do not
operate the monitor while driving.
1)Power button
2)Timer
3)Personal preference
4)Decrease button
5)Mute
6)Memory
7)Picture invert(up ,down ,left ,right)
8)Increase button
9)Menu button
1.Press the open button and to open the screen
2.Draw the screen along the horizontal direction until
it can not slide in this dire direction
3.Upturn the screen ,the maximum
o
angle is 120
o
4.Adjust Angle :Horizontal :+/-30
o
Vertical:0~120
o
+/-30
o
0~120
Flip vertical
o
120
Operation
Remote Control Operation
1
2
3
4
5
6
7
8
9
Instruction for Panel Funxtions
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1.Open button
2.Power button
3.Clock/Calendar Adjuster Button(-)
4.Clock/Calendar Selection Button
5.Clock/Calendar Adjuster Button(+)
6.Decrease(-)
7.Menu
8.Increase(+)
9.Remote Control Window
10.Day Display
11.Year Display
12.Month Display
13.Date Display
14.Time Display
Installation and Connection
Video l
Video ll
Yellow
Fuse(15A)
Black
Negative(Ground)
Red Wire to Acc
Blue wire connect to reverse light
(For connect reverse camera use)
Battery
1.Press MENU key or to adjust them
2.Press P.P key to select the ideal image quality from the 5 press modes
MILD
VIVID
BRIGHT
CUSTOM
STANDARD
Clock Adjusting Method:
Operation method
Press Selection/Confirm Key ,and press + or key while the display
is flashing (about 8 s);sdjust the time correctly ,then press or wait for 8 s to
store the adjustment.
Auto power off :Fold the display screen and push it into the box till a Click
is heard .The display will be automatically powered off.
Power on :Press Open Switch from the panel to eject the display screen,
then pull it out and adjust the screen to display sight manually.
Press Power Switch on the panel to turn on the power. VCD or
DVD signal will be displayed now .If no signal ,it will be displayed
in blue screen. Stable color picture can only be obtained when
disc player and the display are at the same system .Please switch
over the system in case on color signal is obtained .
Watch :Based on the individual demand ,adjust the parameter and view angle
with reference to the description on functional keys.
Remote Control replacing batteries
PULL OUT
PUSH
Technical parameters
LCD Drive Method: TFT Active Matrix
Display Size: 7 Inch(diagonal)
Aspect:16:9/4:3 Selectable
Display Format :480 x RGB x 234
Number of Pixels :1440 x 234
Video System Input :NTSC/PAL Auto-select
Back Light :High Brightness Type U Shaped CCFT
Power Source:DC12V
Current Consumption:8W
Dimensions (H x W x D):49 x178 x 160(mm)
Supplied accessories
Main Set 1
Remote control 1
Screw and Keys 2
Manual 1
Spare Frame 1
1)Always use new batteries when replacing the old set.
2)Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
3)Battery replacement is necessary when remote control acts sporadically or stops
operating.
4)Do not drop, apply shock or step on the remote control.
5)Do not spill water on the remote control.
6)Do not place objects between the remote control and remote sensor.
7)Do not use remote control for other equipments at the same time.
8)If the MONITOR does not operate even when operating the remote control from
a close range, it is time to replace the batteries(use CR-2025), refer to the label
on back of the basic control.
-
1
-
2
-
3
-
4
-
5
-
6
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Hyundai H-LCD703 User manual
-
-
NEC vt 660 User manual
-
Panasonic CQVD7200U Operating instructions
-
Swann Alpha D01 Operating instructions
-
-
Lanzar Car Audio SDBT77NU User manual
-
Toshiba TLP-B2 User manual
-
NEC multisync vt460k User manual
-