Assembly Instructions
I/O Interface Adapter -
Part.-No. 5961349
Edition: 11/2015 · Part No.: 9009831
Contents of Delivery
1 I/O Interface Adapter 25 pin/15 pin
Function
The I/O interface adapter 25 pin/15 pin provide a 15 pin
Interface to use existing systems with a 15 pin female
connector which used a Hermes A labeling system before.
Mounting
Attention !
Switch off the printer system before mounting
the adapter.
1. If using a compressed air service unit or a signal lamp
it' necessary to dismount the mounting bracket from the
printer.
2. Mount the interface adapter on the I/O interface of the
printer and connect the existing system with the 15 pin.
female connector of the interface adapter.
3. After connecting and tighten the interface adapter mount
the mounting bracket with the compressed air service unit
or a signal lamp on the printer.
i
Notice!
In special applicators it's possible that standard signal are used with a other meaning in the rmware.
The result can be a function error.
In this case contact the producer please.
i
Notice!
The old signal "applicator error" drop out.
1
Germany
cab Produkttechnik
GmbH & Co KG
Postfach 1904
D-76007 Karlsruhe
Wilhelm-Schickard-Str. 14
D-76131 Karlsruhe
Telefon +49 721 6626-0
Telefax +49 721 6626-249
www.cab.de
France
cab technologies s.a.r.l.
F-67350 Niedermodern
Téléphone +33 388 722 501
www.cab.de/fr
USA
cab Technology Inc.
Tyngsboro MA, 01879
Phone +1 978 649 0293
www.cab.de/us
Asia
cab Technology Co., Ltd.
Junghe, Taipei, Taiwan
Phone +886 2 8227 3966
www.cab.de/tw
China
cab (Shanghai)Trading Co., Ltd.
Phone +86 21 6236-3161
www.cab.de/cn
Representatives in other countries on request