VOLTCRAFT VC 870 Operating Instructions Manual

Page is loading ...

4

13. Entsorgung .......................................................................... 18

a) Produkt ............................................................................ 18

b) Batterien und Akkus ........................................................ 18

14. Technische Daten ................................................................ 19

Bei technischen Fragen wenden Sie sich bitte an:

Deutschland: www.conrad.de/kontakt

Österreich: www.conrad.at

www.business.conrad.at

Schweiz: www.conrad.ch

www.biz-conrad.ch

Page is loading ...

20

TABLE OF CONTENTS

Page

1. Introduction .......................................................................... 22

2. Delivery content ................................................................... 23

3. Explanations of symbols ...................................................... 23

4. Intended use ........................................................................ 24

5. Safety instructions ............................................................... 25

a) Persons / Product ............................................................ 25

b) Miscellaneous ................................................................. 26

6. Notes on (rechargeable) batteries ....................................... 27

7. Operating elements ............................................................. 28

8. Batteries .............................................................................. 29

9. Installing the adapter ........................................................... 30

10. Operation ............................................................................. 31

a) Important information regarding Bluetooth

®

.................... 31

b) Installing the app ............................................................. 31

c) Connection (pairing) ........................................................ 32

d) Auto off ............................................................................ 33

e) Ending data transmission ................................................ 33

11. Maintenance and care ......................................................... 34

12. Declaration of conformity (DOC).......................................... 34

21

13. Disposal ............................................................................... 35

a) Product ............................................................................ 35

b) (Rechargeable) batteries ................................................. 35

14. Technical data ...................................................................... 36

If there are any technical questions, please contact:

International: www.conrad.com/contact

United Kingdom: www.conrad-electronic.co.uk/contact

22

1. INTRODUCTION

Dear Customer,

In purchasing this Voltcraft

®

product, you have made a very good

decision for which we would like to thank you.

Voltcraft

®

- In the eld of measuring, charging and network

technology, this name stands for high-quality products which

perform superbly and which are created by experts whose concern

is continuous innovation.

From the ambitious hobby electronics enthusiast to the

professional user, products from the Voltcraft

®

brand family provide

the optimum solution even for the most demanding tasks. And the

remarkable feature is: we offer you the mature technology and

reliable quality of our Voltcraft

®

products at an almost unbeatable

price-performance ratio. In this way, we aim to establish a long,

fruitful and successful co-operation with our customers.

We wish you a great deal of enjoyment with your new Voltcraft

®

product!

All company names and product names are trademarks of their

23

2. DELIVERY CONTENT

• Adapter (with mounting screw)

• 2 x AAA batteries

• Operating instructions

3. EXPLANATIONS OF SYMBOLS

This symbol indicates health risks e.g. due to electric

shock.

The symbol with an exclamation point indicates special

risks associated with handling, operation or use.

The “arrow” symbol indicates special remarks and notes for

operation.

24

4. INTENDED USE

The Bluetooth

®

adapter is used to display measurements taken by

the digital multimeter on a mobile device with Apple iOS or Android

operating system. A Bluetooth

®

connection and mobile app are

required to transmit and display/evaluate data.

The adapter is easy to attach to tting multimeters. Data is

transmitted from the multimeter to the adapter via a serial infrared

interface.

The following multimeter models are designed for attachment to

the adapter: Voltcraft

®

VC830 / VC850 / VC870 / VC880 / VC890

For safety and approval purposes (CE), you must not rebuild and/

or modify this product. If you use the product for purposes other

than those described above, the product may be damaged. In

addition, improper use can cause hazards such as short-circuiting,

re, electric shock etc. Read the instructions carefully and keep

them. Make this product available to third parties only together with

its operating instructions.

This product complies with the statutory national and European

requirements.

25

5. SAFETY INSTRUCTIONS

Read the operating instructions carefully and

especially observe the safety information. If you

do not follow the safety instructions and

information on proper handling in these operating

instructions, we assume no liability for any

resulting personal injury or damage to property.

Such cases will invalidate the warranty/guarantee.

a) Persons / Product

• The device is not a toy. Keep it out of the reach of children

and pets.

• Do not leave packaging material lying around carelessly. These

may become dangerous playing material for children.

• Protect the product from extreme temperatures, direct sunlight,

strong jolts, high humidity, moisture, ammable gases, vapours

and solvents.

• Do not place the product under any mechanical stress.

• It is intended for indoor use only. Do not use it outdoors.

Contact with moisture, e.g. in bathrooms, must be avoided

under all circumstances.

• Please handle the product carefully. Jolts, impacts or a fall even

from a low height can damage the product.

26

• If it is no longer possible to operate the product safely, take it

out of operation and protect it from any accidental use. Safe

operation can no longer be guaranteed if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient

conditions or

- has been subjected to any serious transport-related

stresses.

• Also observe the safety and operating instructions of any other

devices which are connected to the product.

• For installations in industrial facilities, follow the accident

prevention regulations for electrical systems and equipment

of the government safety organization or the corresponding

authority for your country.

• Do not attach the device just after moving it from a cold to

a warm space. When this happens, condensation may form

which can cause damage to the device. Wait until the product

has adjusted to the ambient temperature.

b) Miscellaneous

• Consult a professional if you require assistance with product

operation, safety or connection.

• Maintenance work, adjustments and repairs may be carried out

only by a professional or at a specialist workshop.

• If you have questions which remain unanswered by these

operating instructions, contact our technical support service or

other technical personnel.

27

6. NOTES ON (RECHARGEABLE)

BATTERIES

• Correct polarity must be observed while inserting the

(rechargeable) batteries.

• (Rechargeable) batteries should be removed from the device if

it is not used for a long period of time to avoid damage through

leaking. Leaking or damaged (rechargeable) batteries might

cause acid burns when in contact with skin, Therefore use

suitable protective gloves to handle corrupted (rechargeable)

batteries.

• (Rechargeable) batteries must be kept out of reach of children.

Do not leave (rechargeable) batteries lying around, as there is

risk, that children or pets swallow them.

• All (rechargeable) batteries should be replaced at the same

time. Mixing old and new (rechargeable) batteries in the device

can lead to (rechargeable) battery leakage and device damage.

• (Rechargeable) batteries must not be dismantled, short-

circuited or thrown into re. Never recharge non-rechargeable

batteries. There is a risk of explosion!

28

7. OPERATING ELEMENTS

1 Battery compartment lid

2 Battery indicator lamp

3 Indicator lamp LINK

4 ON/OFF switch

5 PAIR button

6 Infrared contacts

7 Screw

29

8. BATTERIES

1. See Fig. 1.

2. Push the battery compartment lid (1) in the opposite direction

of the arrow and lift.

3. Insert two AAA batteries into the battery recesses, observing

correct polarity. Markings in the battery recesses indicate

correct polarity.

4. First, insert the locking clip on the battery compartment lid in

the opening on the adapter and then slide the lid on. Make

sure that the lid locks correctly.

Replace the batteries when the battery indicator lamp (2)

begins ashing.

Fig. 1

30

9. INSTALLING THE ADAPTER

Do not forget to insert batteries before installing the

adapter.

Keep the infrared interface contacts on the adapter (6)

and multimeter clean and free of dust. Clean the

contacts with a lint- and dust-free cloth before attaching

the adapter.

1. See Fig. 2.

2. Turn over the multimeter and place it on a soft, protective

surface.

3. Slide the adapter all the way into the adapter attachment on

the multimeter.

4. Use a Phillips screwdriver to slightly tighten the Phillips screw (7).

• Repeat these steps in reverse order to detach the adapter.

Fig. 2

31

10. OPERATION

a) Important information regarding Bluetooth®

• The transmission range is up to 10 meters in open spaces.

• Please note that furniture, walls or electronic devices may

cause interference between the adapter and your mobile

device.

b) Installing the app

An app must be installed on your display device (mobile device)

in order to use the Bluetooth

®

function. The app is available for

download from the Apple App Store for iOS devices / Google Play

for Android devices.

1. Navigate to Apple App Store / Google Play.

2. Search for the app called „SMART BT MEASURE“.

3. Verify that your device meets the app requirements.

4. Download the app onto your mobile device and follow the

installation instructions.

32

c) Connection (pairing)

Before establishing a Bluetooth

®

connection, read the instructions

for Bluetooth

®

connections/data transmission in the app help

menu and in the user manual for your mobile device and digital

multimeter (if available).

Now establish a connection:

1. Turn on the digital multimeter.

2. Switch the digital multimeter into PC mode by pressing and

holding the REL/PC button on the multimeter several times

for approx. 2 seconds until the –PC or

symbol appears

in the display.

3. Slide the ON/OFF (4) switch to ON to turn the adapter on. The

battery indicator lamp (2) and LED indicator lamp LINK (3)

light up briey.

» The LED indicator lamp LINK ashes once (1x) in three

seconds.

» The adapter is now visible to mobile devices (broadcasting).

4. Create a new project/device in the app. Press the button

“CONNECT DMM” in the app.

5. The adapter shows up as a new device in the app. Select the

adapter.

» The LED indicator lamp LINK remains lit while pairing is in

progress.

6. On request, press and hold the PAIR button (5) for approx. 3

seconds to start pairing. Conrm the request in the app.

» The LED indicator lamp LINK goes out.

33

7. The model number of the digital multimeter is displayed in the

app. Conrm the device to conclude pairing.

8. Data can be transmitted when pairing has been successfully

concluded.

» The LED indicator lamp LINK ashes quickly.

d) Auto off

The adapter turns off automatically in the following circumstances:

• Low battery.

• No connection is established within 5 minutes of the adapter

being turned on.

• No data is transmitted within 5 minutes of successful pairing.

• Data transmission between adapter and mobile device is

interrupted for longer than 5 minutes.

To use the adapter again, slide the ON/OFF switch to OFF

and back to ON.

e) Ending data transmission

End data transmission by sliding the ON/OFF switch to OFF. The

adapter is now off.

34

11. MAINTENANCE AND CARE

• The product does not require any maintenance, do not

disassemble it. Maintenance or repairs may be carried out by a

professional only.

• Turn off the product and remove the batteries before cleaning.

• Never submerge the product in water or other liquids.

• Clean the exterior of the product using a clean, soft, dry cloth

only. You can easily remove dust using a clean, soft brush or a

vacuum cleaner.

• Do not scratch the infrared contacts (6).

• Do not use any aggressive cleaning agents or chemical

solutions as these may damage the housing causing

discoloration and/or malfunction.

12. DECLARATION OF CONFORMITY

(DOC)

We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240

Hirschau, hereby declare that this product conforms to the

fundamental requirements and the other relevant regulations of

the directive 1999/5/EC.

The Declaration of Conformity for this product can be found

at www.conrad.com.

35

13. DISPOSAL

a) Product

Electronic devices are recyclable waste and must not

be disposed of in the household waste.

At the end of its service life, dispose of the product

according to the relevant statutory regulations.

Remove any inserted (rechargeable) batteries and dispose of

them separately from the product.

b) (Rechargeable) batteries

You as the end user are required by law (Battery Ordinance) to

return all used batteries/rechargeable batteries. Disposing of them

in the household waste is prohibited.

Contaminated (rechargeable) batteries are labelled

with this symbol to indicate that disposal in the domestic

waste is forbidden. The designations for the heavy

metals involved are: Cd = Cadmium, Hg = Mercury, Pb

= Lead (name on (rechargeable) batteries, e.g. below

the trash icon on the left).

Used (rechargeable) batteries can be returned to collection

points in your municipality, our stores or wherever (rechargeable)

batteries are sold.

You thus full your statutory obligations and contribute to the

protection of the environment.

36

14. TECHNICAL DATA

Fits ................................................... Voltcraft

®

VC830 / VC850 /

VC870 / VC880 / VC890

Power supply ................................... 2 x 1.5 V AAA batteries

Bluetooth

®

-Version ........................... BT4.0

Operating systems ........................... iOS 7.0 and higher,

iPhone4S and higher /

Android 4.3 and higher /

supports BT4.0

Bluetooth

®

transmission range ........ max.10 m (in open area)

Operating altitude ............................ max. 2000 m above sea level

Operating conditions ........................ 0 to +30 ºC, <80 % RH

>+30 to +40 ºC, <75 % RH

>+40 to +50 ºC, <45 % RH

Storage conditions ........................... -20 to +60 ºC, 5 – 90 % RH

Dimensions (W x H x D) .................. 60 x 33 x 74 mm

Weight .............................................approx. 55 g

Page is loading ...

63

7. BEDIENINGSELEMENTEN

1 Deksel batterijvak

2 Batterijcontrolelampje

3 LINK LED-controlelampje

4 ON/OFF schakelaar

5 PAIR toets

6 Infrarood contacten

7 Schroef

Page is loading ...

Impressum

Dies ist eine Publikation der Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau

(www.conrad.com).

Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z. B.

Fotokopie, Mikroverlmung, oder die Erfassung in elektronischen Datenverarbeitungsanlagen,

bedürfen der schriftlichen Genehmigung des Herausgebers. Nachdruck, auch auszugsweise,

verboten. Die Publikation entspricht dem technischen Stand bei Drucklegung.

Legal Notice

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau

(www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy,

microlming, or the capture in electronic data processing systems require the prior written

approval by the editor. Reprinting, also in part, is prohibited. This publication represent the

technical status at the time of printing.

Information légales

Ceci est une publication de Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau

(www.conrad.com).

photocopie, microlm, saisie dans des installations de traitement de données) nécessite

une autorisation écrite de l‘éditeur. Il est interdit de le réimprimer, même par extraits. Cette

publication correspond au niveau technique du moment de la mise sous presse.

Colofon

Dit is een publicatie van Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau

(www.conrad.com).

Alle rechten, vertaling inbegrepen, voorbehouden. Reproducties van welke aard

dan ook, bijvoorbeeld fotokopie, microverlming of de registratie in elektronische

gegevensverwerkingsapparatuur, vereisen de schriftelijke toestemming van de uitgever.

Nadruk, ook van uittreksels, verboden. De publicatie voldoet aan de technische stand bij het

in druk bezorgen.

V2_0814_02_JH

VOLTCRAFT VC 870 Operating Instructions Manual

VOLTCRAFT VC 870 Operating Instructions Manual

in other languages

Related papers

Other documents