ASSEMBLY INSTRUCTIONS
1
3
CARE INSTRUCTIONS
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.
Cover furniture with outdoor furniture covers when not in use.
Made in CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Call toll-free:
800-457-4652
Please refer to part numbers when reordering
Fig. 1
Fig. 2
2
Your balcony chairs are now ready to use.
3
Place the sling seat and back (B) on the
chair frame (A) and align the holes in the
seat with the holes in the frame. Insert a
short bolt (Ca) through a metal washer (Cc),
throughthe front crossbar under the sling
seat, secure into the leg. See Fig. 1. Don’t
tighten completely. Repeat procedure
for the other side.
Align the holes in the sling back with the
holes in the frame. Insert a long bolt (Cb),
through a metal washer (Cc), through the
side rail of the sling back (B), and secure
into the rear leg. See Fig. 2. Don’t tighten
completely. Repeat procedure for the other
side.
Now securely tighten all the bolts by Allen
wrench (Cd). Repeat procedure for the
remaining five chairs.
Cc
Ca
Cc
Cb
B
A