Silvercrest SGM 110 A1 Operating Instructions Manual

IAN 285964

FACIAL MASK MAKER

APARATO PARA HACER MÁSCARAS FACIALES

SGM 110 A1

FACIAL MASK MAKER

Operating instructions

APARATO PARA HACER MÁSCARAS

FACIALES

Instrucciones de uso

US - EN Operating instructions Page 1

US - ES Instrucciones de uso Página 21

Before reading, unfold the page containing the illustrations and familiarize yourself with all functions of the

device.

Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con todas

las funciones del dispositivo.

B

A

24x

SGM 110 A1

US-EN │ 1 ■

Table of Contents

Introduction .......................................2

Warning types .....................................2

Safety instructions ..................................3

Important cord information .....................................6

Intended Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Package contents ...................................7

Appliance description ...............................8

Technical speciﬁcations ..............................8

Before ﬁrst use .....................................9

Using the appliance .................................9

Cleaning .........................................13

Tips for face mask creation ..........................17

Storage ..........................................17

Disposal .........................................18

3 year limited warranty ............................18

Distributor ........................................20

SGM 110 A1

■ 2 │ US-EN

Introduction

Congratulations on the purchase of your new appliance.

You have selected a high-quality product. The operating instructions

are part of this product. They contain important information about

safety, usage and disposal. Before using the product, please

familiarize yourself with all operating and safety instructions. Use

the product only as described and for the range of applications

speciﬁed. Please also pass these operating instructions on to any

future owner.

Warning types

The following warning types are used in these operating

instructions:

This is the safety alert symbol. It is used to alert you to

potential injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury and death.

DANGER indicates a hazardous situation that, if not avoided, will

result in death or serious injury.

WARNING indicates a hazardous situation that, if not avoided,

could result in death or serious injury.

CAUTION indicates a hazardous situation that, if not avoided,

could result in minor or moderate injury.

NOTICE indicates information that is considered important, but

not hazardous (e. g. messages related to property damage).

SGM 110 A1

US-EN │ 3 ■

Safety instructions

This section contains important safety instructions for using the ap-

pliance. This appliance complies with statutory safety regulations.

Improper use may result in personal injury and property damage.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

When using electrical appliances, basic safety precautions

should always be followed, including the following:

1. READ ALL INSTRUCTIONS.

2. If the power supply cord of the appliance is damaged, it must

be replaced by the manufacturer, its customer service depart-

ment, or a similarly qualiﬁed person to avoid hazards.

3. Only use the device in dry indoor areas - never outdoors.

4. Do not use the appliance near water, e.g. sinks, shower, or

bathtubs.

5. Never use the appliance while bathing, showering, or sleeping.

6. Never touch the power plug or power cord with wet hands.

7. Check the appliance for visible external damage before

use. Do not operate appliances that have been damaged or

dropped.

8. Children must not play with the appliance.

9. Only operate the unit with the supplied power cord.

10. If you are not sure whether you should use the appliance

due to pre-existing conditions, consult a physician prior to use.

SGM 110 A1

■ 4 │ US-EN

11. If possible, place the device near an electrical outlet. Make

sure that the power plug is quickly accessible in case of

danger and that the power cord cannot become a tripping

hazard.

12. Ensure a safe and stable location for the appliance.

13. Do not use the appliance in case of rashes, inﬂammation,

swelling, sensitive spots, diabetes, open wounds, burns,

eczema, or psoriasis.

14. The plug connection of the appliance must not come into

contact with any liquids.

15. This appliance may only be used by children aged 8 years

and above and by persons with limited physical, sensory or

mental capabilities or lack of experience and knowledge, if

it is provided that they are being supervised or have been

instructed on how to use the appliance safely and are

aware of the potential risks.

16. Children may only attempt to carry out any cleaning and

maintenance tasks on the appliance if they are at least 8

years old and under supervision.

17. Children younger than 8 must be kept away from the appli-

ance and its connection cable.

18. If you are not sure whether you should use the appliance

due to pre-existing conditions, consult a physician prior to

use.

19. The surface of the heating unit retains residual heat after

use.

20. Always disconnect the appliance from the power supply

before leaving it unsupervised and before assembly, disas-

sembly or cleaning.

SGM 110 A1

US-EN │ 5 ■

21. Before replacing accessories or additional parts that move

during operation, turn oﬀ the appliance and disconnect it

from the power supply.

22. Only use the appliance for its intended purpose. Misuse can

lead to injury!

23. Do not use the appliance in case of rashes, inﬂammation,

swelling, sensitive spots, diabetes, open wounds, burns,

eczema, or psoriasis.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY.

DO NOT IMMERSE IN WATER.

This product contains chemicals known to the

State of California to cause cancer and birth defects or other

reproductive harm.

Do not use the device with commonly available

collagen tablets. Only use with the dedicated collagen tablets

which are part of the device or explicit sold for the device.

► Never operate the appliance when it is empty, without liquid.

► Never ﬁll the appliance with aggressive or solvent-based

substances!

► Always place the unit on level surfaces.

► Please keep the terminal fully dry.

SGM 110 A1

■ 6 │ US-EN

Important cord information

This appliance has a polarized plug. To reduce the risk of electric

shock, this plug only ﬁts into a polarized outlet in one way. If

the plug does not ﬁt fully into the outlet, reverse the plug. If it

still does not ﬁt, contact a qualiﬁed electrician. Do not attempt to

modify the plug in any way.

a) A short power supply cord (or detachable power supply cord)

should be used to reduce the risk resulting from becoming

entangled in, or tripping over a longer cord.

b) Longer detachable power supply cords or extensions cords

may be used if they are used carefully.

c) If a longer detachable power supply cord or extension cord

is used:

1) The marked electrical rating of the cord set or extension

cord should be at least as great as the electrical rating of the

appliance;

2) The cord should be arranged so that it will not drape

over the countertop or tabletop where it can be pulled on

by children or tripped over unintentionally; and

3) If the appliance has a grounded plug, the cord set or

extension cord should also be a grounded 3-wire cord..

SGM 110 A1

US-EN │ 7 ■

Intended Use

This appliance is only intended for mixing face masks. This appli-

ance is intended for use in private households only. Do not use it

for commercial purposes.

Package contents

Facial mask maker

Measuring cup

Cleaning brush

Mask tray

24 collagen tablets

Operating instructions

Check the package for completeness and signs of visible damage.

If the delivery is incomplete or damage has occurred as a result of

defective packaging or during transport, contact the customer service

hotline (see "3 year limited warranty" section).

SGM 110 A1

■ 8 │ US-EN

Appliance description

Illustration A:

 Lid release

 "Start" button

 Indicator light

 Casing

 Output unit release

 Output opening

 Socket

 Fill opening

 Casing lid

 Fill opening closure

Illustration B:

- Collagen tablet

3 Connecting plug

! Mask tray

. Measuring cup

0 Cleaning brush

Technical speciﬁcations

Voltage 120 V ∼, 60 Hz

Power consumption 110 W

max. ﬁll level 4.06 oz [120 ml] (+/- 5%)

SGM 110 A1

US-EN │ 9 ■

Before ﬁrst use

1) Clean the appliance as described in the chapter on "Cleaning"

to remove transport dust. Dry it well.

2) Place the unit on a level and stable surface.

Using the appliance

Only use distilled water to make face masks!

1) Plug the connecting plug

3 into the socket  of the appliance.

2) Connect the power plug into a power socket. A beep will

sound and the indicator light

 will light up green, and then it

will ﬂash green continuously.

3) Slide the mask tray

! in front of the appliance so that the

notch at the edge protrudes underneath the appliance and

nestles around the curvature underneath the appliance (see

Fig. 1):

Fig. 1

SGM 110 A1

■ 10 │ US-EN

4) Open the ﬁll opening closure  by turning it slightly counter-

clockwise and lifting it (see Fig. 2):

Fig. 2

Use the supplied measuring cup . to measure the liquid amounts.

5) Slowly pour in distilled water into the unit through the ﬁll

opening

. As soon as the required quantity (2 ﬂ oz [60 ml])

is reached, you will hear a beep and the indicator light  will

ﬂash red.

6) Add the nurturing liquid, such as fruit juice or milk (see chapter

about "Tips for face mask creation").

As soon as the required amount of liquid (an additional

0.8ﬂoz [25 ml]) is added, you will hear a beep and the

indicator light

 will light up permanently red.

7) Insert the collagen tablet

- through the ﬁll opening into the

appliance.

SGM 110 A1

US-EN │ 11 ■

To order more collagen tablets -, please contact our customer service

department (see chapter regarding "3 year limited warranty").

8) Close the ﬁll opening

 by placing the ﬁll opening closure 

slightly oﬀset on the ﬁll opening : The latches in the ﬁll open-

ing  must slide into the recesses on the ﬁll opening closure .

Then, turn the ﬁll opening closure  slightly clockwise until the

ﬁll opening closure  closes ﬁrmly.

9) Press the "Start" button

. You will hear a beep and the indica-

tor light  will light up permanently green.

The appliance will start mixing and heating the ingredients.

If you remove the mask tray ! from the appliance during the preparation

of the mask liquid, you will hear the beeping sounds and the indicator

light  will turn yellow. Preparation of the face mask continues, but the

mask liquid is not dispensed. Dispensing begins only once the mask tray !

has been placed correctly under the appliance and the face mask has

ﬁnished mixing.

After about 6 minutes, the facial mask will be ready and the facial

mask will automatically run into the mask tray

!. The indicator

light  will ﬂash green continuously.

Preparation time can vary according to the starting temperature and type

of ingredients!

Approx. 20 seconds after the face mask is poured into the mask

tray

!, long beeps will sound. Disconnect the power plug from

the power socket.

10) Tilt the mask tray

! slightly to ensure optimal distribution of the

liquid.

SGM 110 A1

■ 12 │ US-EN

11) If you want to make a refreshing face mask, carefully place the

mask tray ! in the refrigerator and wait for it to cool down.

If you want to make a warm face mask, wait about 5 minutes

until the mask has turned into a gel-like substance.

The gel setting time can vary greatly depending on the type of ingredients!

12) Carefully remove the face mask from the mask tray

!. To re-

move the face mask, place a teaspoon at the edge of the mask

tray !and gently lift the mask out of the mask tray !.

Test the mask ﬁrst in an inconspicuous location to test the compatibility.

13) Put yourself in a reclining position and tilt your head back.

Place the mask on your face. Start with the eye cutouts. Ensure

that your eyes ﬁt the holes in the mask. Proceed with the holes

for your nose and mouth in the same way. Ensure that you can

breathe freely (cf. Fig. 3)

Fig. 3

SGM 110 A1

US-EN │ 13 ■

14) Leave the mask on for 10 - 15 minutes, depending on your

personal preferences. Afterwards, simply remove it.

If you develop an unpleasant feeling during the application or your skin

starts to itch or burn, remove the face mask immediately. Rinse your face

with plenty of clean water!

The used face masks can be disposed of in normal household waste.

Cleaning

For hygienic purposes, you must clean the appliance after each use.

Disconnect the power plug from the power

socket and the connecting plug

3 from the socket  on the appli-

ance before any further cleaning.

Never immerse the appliance in water or

other liquids!

Allow the appliance to cool oﬀ slightly before

you clean it.

Do not use pointed or sharp objects to remove

cold collagen from the appliance!

Do not use chemical, abrasive, or aggressive

cleaning agents to clean the appliance!

■ Rinse the mask tray ! in warm water and add a mild deter-

gent.

■ Wipe the power cord with a damp cloth. Make sure the power

cord is completely dry before re-use.

SGM 110 A1

■ 14 │ US-EN

■ Take the appliance apart for thorough cleaning (see Fig. 4):

– Remove the ﬁll opening closure .

– Press the lid release . The casing lid  ﬂips slightly

upwards.

– Remove the casing lid .

– Pull the motor unit

out of the casing

.

– Turn the casing  over and press the output unit release 

together. You can then pull out the output unit with the

output opening .

Fig. 4

SGM 110 A1

US-EN │ 15 ■

■ Wipe the motor unit , the ﬁll opening closure , the casing

lid

, and the casing  from the inside and outside with a

damp cloth. For stubborn dirt, add a mild detergent to the

cloth. For hard-to-reach corners, use the supplied cleaning

brush

0. Remove any detergent residue with a damp cloth

and water only.

■ To clean the drive unit thoroughly, disassemble it as illustrated

in Fig. 5:

– Turn the lower part (metal) of the drive unit clockwise

until the - mark on the lower part (metal) points at the

- mark on the drive unit .

– Detach the lower part (metal) from the drive unit .

Fig. 5

– Rinse the lower part (metal) of the motor unit in warm

water and add a mild detergent. Rinse it with clean water

and dry it well.

SGM 110 A1

■ 16 │ US-EN

Fig. 6

– Wipe the plastic part of the motor unit

with a damp

cloth. For stubborn dirt, add a mild detergent to the cloth.

For hard-to-reach corners, use the supplied cleaning brush

0.

Remove any detergent residue with a damp cloth and wa-

ter only . Make sure that the seal ring is properly placed in

the plastic part of the motor unit

(see Fig. 6)

.

– Put both parts back together so that the - mark on the

lower part (metal) points at the - mark on the drive unit .

Lock the parts by turning the lower part (metal) counter-

clockwise. Make sure you turn the lower part (metal) as

far as possible in a counter-clockwise direction to prevent

leaks.

■ Rinse the output unit in warm water and add a mild detergent.

■ Dry all parts well. All parts must be completely dried before

reassembling the appliance.

Take special care to ensure that the metal contacts on the drive unit and

inside the casing  are not damp. Dampness may cause the appliance to

malfunction!

SGM 110 A1

US-EN │ 17 ■

Tips for face mask creation

Depending on the treatment purpose and skin type, you can make

your facial mask with various additives.

The following table gives you examples of various additives.

Please note that each skin type reacts diﬀerently to the additives.

Eﬀect Additive

moisturizing

Apple juice

Red wine

Pear juice

Milk

Tomato juice

Olive oil

wrinkle-reducing

Buttermilk

Orange juice

Strawberry juice

Carrot juice

If you want to obtain a particularly refreshing eﬀect, place the facial mask

in the mask tray ! in the refrigerator so that it becomes pleasantly cool.

If you want to use viscous additives, liquefy them with water prior to use.

Storage

■ Clean the appliance as described in the chapter on "Cleaning"

before storing it.

■ Store the device in a dry and dust-free location.

Page is loading ...

Silvercrest SGM 110 A1 Operating Instructions Manual

Silvercrest SGM 110 A1 Operating Instructions Manual

in other languages

Related papers

Other documents