2 EATON ET5040 & ET5050 Crimp Machine Product/operational update instructions E-EQCR-TT007-E August 2015
Product/operational updates
Rotate the main power switch located
on the right side of the machine
to the “On” position. Wait for the
machine to boot up. (See figure 1).
Figure 1
Figure 3
Step 1
Step 3
Select the settings icon
to access the settings
menu’s. (See figure 2).
Figure 2
Step 2
Step 4
Step 6
Step 5 - Software update screen
Enter your password.
Note: Factory default is “user”.
Press the “Check”
icon to log-in to the
“Settings” menu.
Enter your user name.
Note: Factory default is
“user”. (See figure 3).
Language screen will be
the first settings screen
displayed. Press the
advance arrow (5-times)
to reach the software
updates screen.
(See figure 4 & 6).
Install the USB device into the
back of the controller and press the
download icon. (See figure 6).
Figure 4
Figure 6
Figure 5
3EATON ET5040 & ET5050 Crimp Machine Product/operational update instructions E-EQCR-TT007-E August 2015
Product/operational updates
Step 7
When updates
are complete and
successful, an image
with a green thumb
up will pop up on the
screen. Select the check
mark to acknowledge.
After acknowledging download
completion, screen will return to
the Language settings screen.
Use forward arrows to advance to
software screen. (See figure 7 & 8).
Figure 7
Step 8
On the software screen, all available
software versions will be displayed.
Figure 8
Step 9
Turn the power off and then back
on to the machine to reboot the
controller. (See figure 11).
Figure 11
Figure 9
Figure 10
Step 12
Step 10
Step 11 - Software screen
Select latest software version
installed. The latest version is
identifiable by the number in the
version. The highest number is the
latest version. (See figure 9).
A green thumbs up icon will appear.
Press the check mark to acknowledge
selection. (See figure 10).
Eaton
Hydraulics Group USA
14615 Lone Oak Road
Eden Prairie, MN 55344
USA
Tel: 952-937-9800
Fax: 952-294-7722
Eaton
Hydraulics Group Europe
Route de la Longeraie 7
1110 Morges
Switzerland
Tel: +41 (0) 21 811 4600
Fax: +41 (0) 21 811 4601
Eaton
Hydraulics Group Asia Pacic
Eaton Building
No.7 Lane 280 Linhong Road
Changning District,
Shanghai 200335
China
Tel: (+86 21) 5200 0099
Fax: (+86 21) 2230 7240
© 2015 Eaton
All Rights Reserved
Printed in USA
Document No. E-EQCR-TT007-E
August 2015
Assembly Equipment
Technical Support | Service | Spare Parts
www.EatonCrimperSupport.com
(1-888-285-6627)
(517-563-8800)
-
1
-
2
-
3
-
4
Eaton ET5050 Update Instructions
- Type
- Update Instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Eaton ET4001 User manual
-
-
-
-
-
-
-
-
-
