2007 Massive Audio Inc.
Printed in the U.S.A.
MASSIVE
Massive Audio Inc.
2261 S. Atlantic Blvd.
City of Commerce, CA 90040 U.S.A.
www.massiveaudio.com
C
Built tough for sound competition
V.1.1
X
X
XT
T
T 6
6
X
9
5
KT 5
KT 6
Turner Series Components / Co-Axials
XT 6
NOTES
14
KT 6
*Due to constant improvement all specs subject to change without notice.
Tuner Series
Introduction:
Congratulations!
And thank you for purchasing “Massive Audio” Tuner Series
Component kits and Co-Axials for your car audio system. You now
own a speaker system of uncompromising design and engineering
incorporating the latest advances in technology. This handcrafted
speaker system is designed to deliver the demands of serious sound
competitors. You will soon discover that the Tuner Series speakers
display a fine balance between high quality, performance and
reliability; all proven qualities of “Massive Audio” products.
“Massive Audio” Speakers are the result of American research and
development using only the highest quality components and quality
control standards. In order to provide you with many years of listening
pleasure, we recommend you to have your new speakers installed by
an Authorized “Massive Audio Dealer.” This will ensure the proper
installation of your product, and will also increase the length of your
warranty to TWO YEARS.
(Please see the warranty section of for more details.)
Please take a moment to thoroughly read this manual to ensure that you
get the maximum benefit from this new addition to your car audio
system. When installed properly, this unit will provide years of
trouble-free performance.
Should your product need service or replacement, please record the
following information, which will help protect your investment.
Model #: _______________________________________
Dealer’s Name: ___________________________________
Date of Purchase: __________________________________
Installation Shop and Date:__________________________
2
6 123 169 62046
TK 5
6 823 169 62047
TK 6
12
Fiberglass reinforced Poly cast basket with heavy powder coating
Shallow mount fiberglass basket to eliminate flexing.
Heavy powder coated polycast to damp the basket and add rigidity, further minimizing
vibration and ringing noises.
Y40 High Flux Ferrite magnets:
High energy Y40 magnets assures sufficient magnetic force
needed for high sensitivity and accurate sound reproduction.
Versatile tweeter mounting options:
For maximum versatility and ease of installation tweeters can be installed as
surface, flush or angle mount. (Components)
360 Swivel mount. (Co-Axials)
30mm Voice coil
Over sized winding to maximize power handling.
Black Electro-coated magnetic plates to draw heat from voice coil.
Mica Filled poly cone with butyl rubber surround:
Increased rigidity and lightness to reproduce accurate notes.
Ferro Fluid cooled voice coil:
Ferro fluid cooled voice coil for smooth precise and high output.
20mm Aluminum Voice coil
Nomax Spider:
High quality Nomax spider to ensure maximum linearity and accurate
sound reproduction .
Competition grade 12 dB Crossover: (components)
High grade audiophile component with poly switch and Sk2 & Sk3 light bulbs
for auto attenuation protects the components at high SPL.
High grade audiophile component with poly switch. (Co-Axials)
Briefcase style gift box packaging:
For enhanced product protection.
:
DESIGN FEATURES
KT 6
XT 6
Included in Component kits:
4
Pair of cast basket Mica-filled cone speakers
Pair of matching crossovers
Pair of 25 mm Nomax tweeters
Pair of speaker grills
Tweeter housing for flush, angle and surface mounts
2 packs of mounting hardware
Included in Co-Axials package:
Pair of cast basket Mica-filled cone Co-Axial speakers
Pair of speaker grills
2 packs of mounting hardware
WARRANTY
• Massive Audio, Inc. warrants all manufactured speaker
products to be free from defect in material and workmanship
for a period not to exceed TWO YEARS* from the date of
purchase when installed by an authorized “Massive Audio”
dealer. Units that are not installed by an authorized “Massive
Audio” dealer maintain a warranty not to exceed 1 year from
the original purchase date by the original purchaser.
• PrOducts that display abuse such as burnt Voice Coils may
not be covered under warranty.
• “Massive Audio’s” obligation under this warranty is limited to
repairing or replacing, at its own discretion, any such defective
products. This warranty does not apply to equipment that has
been damaged by accident, negligence, or misapplication or
has been altered or modified in anyway. This warranty applies
only to the original purchaser who must have properly
registered the product within 10 days of purchase.
Except as provided herein, Massive Audio, Inc. makes no warranties or
representations, express or implied, including any warranty implied by
law, whether for merchantability or fitness for a particular purpose and
shall be effective only for the period that this express warranty is
effective. SEE THE WARRANTY REGISTRATION CARD TO
ADDITIONAL INFORMATION.
KT 6
XT 6
10
Wiring Configuration
(Component Kits)
(Co-Axials)
25W4 R J
10W4 J
7W 2R2J
7W 2R2J
BIPOLAR
4.7J
100 WV
+
+
+
+
PTC
Attenuation bulb
SK-2
Attenuation bulb
SK-3
++++++++
+ +
- - -
Tweeter
Input Woofer +3dB 0dB -3dB
Signal Input
Signal Input
55 Hz* High pass signal when TK6/TX6/
TX 6x9 are used in conjunction with a
subwoofer
65 Hz* High pass signal when TK5/TX5
are used in conjunction with a subwoofer
Full range signal when used
without Subwoofer
*Full range amplifier should be set to hi-pass
mode at required frequency
KT 5
50 100 200 500 1K 2K 5K 10K20 Hz
dBSPL
66
69
72
75
78
81
84
87
90
20K
Deg
-24
-20
-16
-12
-8
-4
0
4
8
12
16
20
24
SPL vs Freq
Specifications
Revc= 3.600 Ohm
Fo= 64.647 Hz
Sd= 8.495m M
Vas= 7.252m M
Cms= 707.677u M/N
Mmd= 8.115m Kg
Mms= 8.565 g
BL= 4.074 TM
Qms= 3.166
Qes= 0.755
Qts= 0.609
Levc= 172.366u H
No= 0.251 %
SPLo= 86.016 dB
52mm
18mm
12mm
46mm
PTC
25W4RJ
10W8RJ 7W2R2J
7W4R7J
6.8uF 100V
20W
12V
20W
12V
Massive Audio, Inc. USA
IN+ IN- WF+ WF- +3dB 0dB -3dB TW-
L1
152mm
5.9”
59.6mm
2.3”
118mm
4.6”
94 mm
3.7”
RMS Power = 100W
Max Power = 260W
Tweeter mounting options:
Tweeter attenuation:(components only)
6
++++++++
+ +
- - -
Tweeter
Input Woofer +3dB 0dB -3dB
Angle mount Flush mount
Surface mount
2K Hz 3K 4K 5K 6K 7K 8K 9K 10K 20K
dBSPL
70
75
80
85
90
95
100
105
110
115
120
125
130 SPL vs Freq
You can use this option to attinuate the hi frequency.
The positive input to the tweeter can be connected to
-3dB / 0dB /+3dB to make the tweeter more bright or
less bright.
Please see the chart below.
+3dB
0dB
-3dB
52mm
18mm
12mm
46mm
52mm
18mm
12mm
46mm
PTC
25W4RJ
10W8RJ 7W2R2J
7W4R7J
6.8uF 100V
20W
12V
20W
12V
Massive Audio, Inc. USA
IN+ IN- WF+ WF- +3dB 0dB -3dB TW-
L1
20 Hz 50 100 200 500 1K 2K 5K 10K 20K
dBSPL
66
69
72
75
78
81
84
87
90 Deg
-24
-20
-16
-12
-8
-4
0
4
8
12
16
20
24
SPL vs Freq
Specifications
Revc= 3.600 Ohm
Sd= 13.070m M
Vas= 17.452m M
Cms= 719.476u M/N
Mmd= 10.314m Kg
Mms= 11.173 g
Fo= 56.133 Hz
BL= 4.613 TM
Qms= 2.722
Qes= 0.667
Qts= 0.535
Levc= 212.776u H
No= 0.448 %
SPLo= 88.529 dB
KT 6
164 mm
6.5”
68.0 mm
2.6”
141.5 mm
5.7”
104 mm
4.1”
RMS Power = 120W
Max Power = 270W
8
XT 6
XT 6
X
9
XT 5
Specifications
20 Hz 50 100 200 500 1K 2K 5K 10K
69
72
dBSPL
75
78
81
84
87
90
93
20K
Ohm
5
6
7
8
9
10
20
30
40
50
SPL vs Freq
Revc= 3.600 Ohm
Fo= 49.499 Hz
Sd= 22.167m M
Vas= 30.729m M
Cms= 440.404u M/N
Mmd= 21.577m Kg
Mms= 23.475 g
BL= 5.374 TM
Qms= 2.729
Qes= 0.910
Qts= 0.683
Levc= 216.364u H
No= 0.396 %
SPLo= 87.995 dB
239 x 167mm
9.4”x 6.5”
87mm
3.4”
239 x 150mm
9.4”x 5.9”
115 mm
4.5”
Specifications
dBSPL
96
78
81
84
87
90
93
20 Hz
72
75
SPL vs Freq
50 100 200 500 1K 2K 5K 10K 20K
6
7
8
9
Ohm
10
20
30
40
50
60
Revc= 3.600 Ohm
Sd= 13.070m M
Vas= 17.452m M
Cms= 719.476u M/N
Mmd= 10.314m Kg
Mms= 11.173 g
Fo= 56.133 Hz
BL= 4.613 TM
Qms= 2.722
Qes= 0.667
Qts= 0.535
Levc= 212.776u H
No= 0.448 %
SPLo= 88.529 dB
164 mm
6.5”
68.0 mm
2.6”
141.5 mm
5.7”
104 mm
4.1”
Specifications
50 100 200 500 1K 2K20 Hz
dBSPL
69
72
75
78
81
84
87
90
93
5K 10K 20K
5
6
7
8
9
10
20
30
Ohm
40
50
SPL vs Freq
Revc= 3.600 Ohm
Fo= 64.647 Hz
Sd= 8.495m M
Vas= 7.252m M
Cms= 707.677u M/N
Mmd= 8.115m Kg
Mms= 8.565 g
BL= 4.074 TM
Qms= 3.166
Qes= 0.755
Qts= 0.609
Levc= 172.366u H
No= 0.251 %
SPLo= 86.016 dB
152mm
5.9”
59.6mm
2.3”
118mm
4.6”
94 mm
3.7”
RMS Power = 90W
RMS Power = 80W
RMS Power = 70W
Max Power = 210W
Max Power = 200W
Max Power = 190W
/
