Product Guid
e
Panel Computer, Fan less
Atom E3940, 10.1" WXGA, 12-24VDC input
PT-V10WB-200 Series
Atom E3940, 15.6" Full-HD, 12-24VDC input
PT-V15WB-200 Series
Thank you for purchasing this product. The product you have purchased consists of the
following items.
Check, with the following list, that your package is complete.
If you find any item either missing or damaged, please contact the sales representative you
purchased the product from.
For appropriate usage, be certain to read the Reference Manual before using this product.
Visit our website for downloading free other software tools.
The following manuals come with this product. Visit our website and download them by
entering the model type in "Downloads". Read them before using the product.
Before using the product, be certain to read the following guide, manual, and driver soft-
ware. They can be downloaded from Contec website.
Name Contents How to
g
et
Product Guide (This sheet) This lists the product configuration and
describes the precautions.
Included in the pack-
age (Printed matter)
Reference Manual This describes the hardware aspects
such as functions and settin
g
s.
Download (PDF)
IPC Precaution List This describes the precautions when
using the product.
Included in the pack-
age (Printed matter)
MICROSOFT SOFTWARE
LICENSE TERMS
(Ro
y
alt
y
consent contract)
This manual explains the conditions and
rights of customers who use Windows
software.
Included in the pack-
age (Printed matter) *1
Pre-installed type OS Manual This describes OS basic information, the
setup procedure, and the recovery
p
rocedure.
Download (PDF)
Download
https://www.contec.com/download/
1. About the Product
This product is the “All-in-One” type PC, which has a10.1-inch size (WXGA 1280×800) and
15.6-inch size (Full-HD1920x1080) LCD touch screen integrated.
Since only selected interfaces such as 1000BASE-T, USB3.2 Gen1(USB3.0), and Audio are
provided, the product can be installed in a smaller space comparing to our earlier panel
integrated computers.
Embedded-type CPU has been adopted. The use of readily available parts ensures the prod-
uct to be applied easily. In addition, the use of Contec-customized BIOS allows support to
be provided at the BIOS level.
2. Product Configuration
This product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or
missing items, contact your retailer.
Product...1 3pin Connector for
Power Suppl
y
… 1
Spacer…4
Hollow Spacer…4
Product Guide...1 IPC Precaution
List...1
Warranty
Certificate...1
Serial Number
Label...1
Royalty consent
contract...1 *1
Recovery
Disk...1 *1
Antenna...1 *2
Cable Tie...1
*1 Only packed in the following product with the OS installed model.
PT-V10WB-200-J104M05W19, PT-V10WB-200R-J104M05W19
PT-V15WB-200-J104M05W19, PT-V15WB-200R-J104M05W19
*2 Only packed in the following product with the Wireless function model.
PT-V10WB-200R-J104M05, PT-V10WB-200R-J104M05W19
PT-V15WB-200R-J104M05, PT-V15WB-200R-J104M05W19
3. Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent acci-
dents resulting in injury or death and the destruction of equipment and resources. Under-
stand the meanings of these labels to operate the equipment safely.
DANGER
Signal word used to indicate an imminently hazardous sit-
uation which, if not avoided, will result in death or serious
injury.
WARNING
Signal word used to indicate a potentially hazardous situ-
ation which, if not avoided, could result in death or seri-
ous injury.
CAUTION
Signal word used to indicate a potentially hazardous situ-
ation which, if not avoided, could result in minor or mod-
erate injury.
Handling Precautions
WARNING
Always check that the power supply is turned off before connecting or disconnecting
power cables.
Do not use the product in locations exposed to a flammable or corrosive gas. It may
cause explosion, fire, electrical shock, or malfunction.
Do not touch metal parts (edge connector) with your hands. Otherwise, the product may
malfunction, or cause failure.
When transporting the product, pack it in the same condition as delivered from the Con-
tec or in equal packing condition to avoid applying shock, vibration, or static electricity
directly to the product.
Do not modify the product.
Always turn off the power before inserting or removing the cables.
This product is not intended for use in aerospace, space, nuclear power, medical equip-
ment, or other applications that require a very high level of reliability. Do not use the
product in such applications.
If using this product in applications where safety is critical such as in railways, automotive,
or disaster prevention or security systems, please contact your retailer.
Do not attempt to replace the battery as inappropriate battery replacement poses a risk
of explosion.
For battery replacement, contact your retailer as it must be performed as a process of
repair.
When disposing of a used battery, follow the disposal procedures stipulated under the
relevant laws and municipal ordinances. For details on replacing the battery, refer to the
appendix.
This product is not suitable for use in locations where children are likely to be present.
CAUTION
Do not use or store this product in a location exposed to high or low temperature that
exceeds range of specification or susceptible to rapid temperature changes.
e.g. - Exposure to direct sun - In the vicinity of a heat source
Do not use this product in extremely humid or dusty locations. It is extremely dangerous
to use this product with its interior penetrated by water or any other fluid or conductive
dust. If this product must be used in such an environment, install it on a dust-proof
control panel, for example.
Avoid using or storing the product in locations subject to shock or vibration that exceeds
range of specification.
Do not use this product in the vicinity of devices that generate strong magnetic force or
noise. Such products will cause this product to malfunction.
Do not use or store this product in the presence of chemicals.
To clean this product, wipe it gently with a soft cloth dampened with either water or mild
detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to
prevent pealing or discoloration of the paint.
CONTEC does not provide any guarantee for the integrity of data on storage.
This product's case may become hot. To avoid being burned, do not touch that section
while this product is in operation or immediately after turning off the power. Avoid
installation in a location where people may come into contact with that section.
Always remove the power cable from the power outlet before connecting or
disconnecting a connector.
Do not touch metal parts or terminals with your hands when the product is in operation.
Otherwise, the product may malfunction, or cause failure.
To prevent corruption of files, shutdown the OS and always wait for five seconds or longer,
then turn off the power of this product.
CONTEC reserves the right to refuse to service a product modified by the user.
In the event of failure or abnormality (foul smells or excessive heat generation), unplug
the power cord immediately and contact your retailer.
Use the power cable that matches the power supply voltage and outlet plug that you are
using.
Always turn off the power before replacing storage. It is not hot-swappable. Removing
the storage during the operation may results in system damages.
CONTEC does not guarantee for a 24-hour continuous operation of the product or
continuous current application to the product.
Do not use any sharp-pointed object such as a mechanical pencil to touch the touch
panel. Doing so may scratch the touch panel, resulting in malfunctions.
LCD may have a few bright spots that are always on or a few black spots that are always
off. Color irregularity may also occur depending on the viewing angle. This however is
due to the structural characteristics of the LCD; therefore, it is not a product fault.
Burn-in on TFT Display
"Burn-in" may occur if the same display is retained for a long time. Avoid this by
periodically switching the display so that the same display is not maintained for a long
time.
* Burn-In : Phenomenon characterized by a TFT display as a result of long-time display
of the same screen where a shadow-like trace persists because electric charge remains
in the LCD element even after the patterns are changed.
This product's specifications allow the device to be rebooted from the BIOS screen during
startup. This has no effect on operation after the OS boots.
This product may not operate properly in some cases due to factors such as the installa-
tion environment of the device or the product, and the communication load of the net-
work system. Please check beforehand to make sure that the device is suitable for your
environment. For installation of the product, please ask a system integrator or other spe-
cialists familiar with the wireless LAN network system construction.
When replacing other type of wireless LAN device with this product, it may be necessary
to reconfigure the network system due to differences in specifications or functions of the
product. Before using this product, it is recommended that a full validation be conducted
with a rental device of the CONTEC's in actual operating environment.
Metal objects within 30 mm around the antenna will affect the antenna characteristics.
Do not place any metal items near the antenna if possible.
Component Life
M.2 SSD --- The assumed life is about 3,000 times. For details on the life estimation, refer
to Reference Manual Appendix.
Battery --- The internal calendar clock and CMOS RAM are backed by a Lithium primary
battery. The backup time at a temperature of 25°C with the power disconnected is 10
years.
Backlight --- The life of the backlight is as follows.
PT-V10WB-200 : 25,000 hours
PT-V15WB-200 : 50,000 hours
(Ambient temperature 25°C±5°C, decreased to 50% of initial brightness)
* Replacement of expendables is handled as a repair (there will be a charge).
* The service life for consumable parts are reference values and are not guaranteed
values.
About listed transfer rate
Data transfer speed listed in this guide or Utility is a theoretical maximum value and does
not indicate the actual data speed.
Usage limitation
This product has not been developed or manufactured to be used in systems including the
equipment which is directly related to human lives *1 or the equipment which involves
human safety and may significantly affect the maintenance of public functions *2. Therefore,
do not use the product for such purposes.
*1 Medical devices such as life-support equipment and devices used in an operating the-
ater.
*2 Main control systems at nuclear power stations, safety maintenance systems at nuclear
facilities, other important safety-related systems, operation control systems within
group transport systems, air-traffic control systems, etc.
If using the IEEE802.11a standard, ensure that you comply with all relevant laws in the coun-
try of use.
Security Precautions
Wireless LAN uses radio waves instead of LAN cables to send and receive data between a
computer and a wireless access point, making it possible to freely establish a LAN connec-
tion within a range of the radio waves. However, radio waves can be received through ob-
stacles, such as walls, when within the range. Therefore, if security settings are not made,
the following problems may occur.
Unauthorized viewing of data
An unauthorized third party can intercept the radio waves and view e-mail messages and
personal information, such as user ID and password or your credit card information.
Unauthorized access
An unauthorized third party can access a personal or corporate network and cause the
following damage:
Intercepting personal information and confidential information (information leak)
Using a false identity to communicate and disclose information illegally (identity theft)
Changing and transmitting intercepted data (tampering)
Damaging data and systems by spreading a computer virus (destruction)
The wireless LAN card and wireless access point have security features to counter these
problems. Using the security settings of the wireless LAN equipment can help prevent these
problems from occurring.
To reduce security problems, configure all security settings of the wireless LAN equipment
according to the manual before using the wireless LAN card and wireless access point.
The customer is responsible for configuring the security settings and understanding the
risks inherent in using the product without the security settings configured.
Notes on Radio Interface
The 2.4 GHz band used by this product covers the operating frequencies of mobile-identi-
fication local radio stations (requiring the license), specific low-power radio stations (requir-
ing no license) and amateur wireless stations (requiring the license) as well as industrial,
scientific, and medical equipment such as microwave ovens.
1. Before using this product, make sure that there is no mobile-identification local radio
station, specific low-power radio station and amateur wireless station operating near
the product.
2. If the product should cause radio interface with any mobile-identification local radio
station or specific low-power radio station, immediately change the operating fre-
quency to avoid the radio interface.
3. Placing wireless terminals near each other may slows down their data rate because of
their mutual interference. You should allow a minimum clearance of about 1m between
stations, 3m between access point and station, and 3m between access points.
4. Contact your local retailer or CONTEC if the product has trouble such as recurrent radio
interface with mobile-identification local radio stations or specific low-power radio sta-
tions.
CONTEC CO.
,
LTD.
3-9-31
,
Himesato
,
Nishi
y
odo
g
awa-ku
,
Osaka 555-0025
,
Ja
p
an
http://www.contec.com
/
No part of this document may be copied or reproduced in any form by any means
without prior written consent of CONTEC CO., LTD.
NA07516 (LYYL693) 02262021_rev3 [09302020] February 2021 Edition
4. Specifications
Function Specifications
Item
Description
PT-V10WB-200 PT-V15WB-200
CPU Intel
®
Atom
®
x5-E3940 Processor (1.6GHz)
BIOS BIOS (mfd. b
y
AMI)
Memory 8GB (204pinSO-DIMM with ECC),
PC3-12800(DDR3L, 1600)
Graphics Controller Intel
®
HD Graphics 500 (CPU inte
g
rated)
LCD type LCD type 10.1-inch TFT color LCD,
WXGA (1280 x 800)
15.6-inch TFT color LCD,
Full-HD (1920 x 1080)
Backli
g
ht LED method, The ON/OFF software can control.
Touch
panel
Resolution WXGA (1280 x 800)
Full-HD (1920×1080)
Detection
method
Capacitive type
Connection Internal USB port
Displa
y
Displa
y
Port × 1
Audio HD Audio compliant, LINE OUT x 1
3.5φ stereo minijack, Full-scale output level 1.1Vrms (Typ.)
Internal monaural speaker x 1
LAN Intel I210IT controller
1000BASE-T/100BASE-TX/10BASE-T
RJ-45 connector x 1 (supports Wake On LAN)
Wireless LAN *1 IEEE 802.11ac/a/b/
g
/n
Bluetooth *1 4.2
USB Type-A controlle
r
USB3.2 Gen1 (USB3.0) compliant x 3 port
Storage 1 slot, M.2 2242, SATAIII
M.2 card, 64GB (MLC) mounted *2
Securit
y
(TPM) TCG TPM2.0
Hardware monitoring Monitoring CPU temperature, board temperature, power volt-
a
g
e
Watchdog timer (WDT) Software programmable, 255 level (1sec - 255sec),
Time up allows reset shutdown or external output.
RTC/CMOS Lithium backup battery life: 10 years or more
The real-time clock is accurate within ±3 minutes (at 25°C) per
month (CPU built-in RTC).
Power Management Power management setup via BIOS
Supports ACPI Power mana
g
ement
Rated input volta
g
e 12 - 24VDC
Ran
g
e of input volta
g
e 10.8 - 31.2V
Power consumption (Max.)
12V 3.0A
24V 1.5A
12V 4.0A
24V 2.0A
External device power supply
capacit
y
USB3.2 Gen1 I/F : +5V : 0.9A x 3
Physical dimensions (mm) 259(W) x 169(H) x 26(D)
(Not protrusions)
389.2(W) x 245.3(H) x 38.7(D)
(Not protrusions)
Wei
g
ht 800
g
approx. 2700
g
approx.
*1 Wireless LAN and Bluetooth are available only for the products with wireless function model.
*2 It is already built in the product. The capacity that can be recognized from OS might be dis-
played fewer than an actual value.
Environment Requirements
Item Description
Operating ambient
temperature
0 - +40°C *3
Non-operating ambient
temperature
-10 - +60°C
Operatin
g
ambient humidit
y
10 - 90%RH (No condensation)
Floatin
g
dust particles Not to be excessive
Corrosive
g
ases None
Line-noise
resistance
Line noise AC line / ±2kV, Signal line / ±1kV
(IEC61000-4-4 Level 3, EN61000-4-4 Level 3)
Static
electricity
resistance
Contact discharge : ±4kV
(IEC61000-4-2 Level 2, EN61000-4-2 Level 2)
Atmospheric discharge : ±8kV
(IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
Vibration
resistance
Sweep
resistance
10 - 57Hz/semi-amplitude vibration 0.075mm, 57 - 150Hz
/1.0G,
40minutes each in X, Y, and Z directions
(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)
Shock resistance 10G half-sine shock for 11ms in X, Y, and Z directions
(JIS C 60068-2-27
–
compliant, IEC 60068-2-27 -compliant)
Groundin
g
Class D
g
roundin
g
, SG-FG / continuit
y
Standard VCCI Class A, FCC Class A,
CE Marking (EMC Directive Class A, RoHS Directive) *4
TELEC (set with the certified wireless module) *5
*3 Derating occurs due to the way of installation. For more details on this, refer to “Installation
Requirements”.
*4 The wireless model is excluded from CE Standard.
*5 The wireless module is set only in the wireless model.
5. Specifications
PT-V10WB-200
PT-V10WB-200R
PT-V15WB-200
PT-V15WB-200R
-
1
-
2
Contec PT-V15WB-200 NEW Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Contec PT-V10WB-200 NEW Owner's manual
-
-
-
-
-
-
-
-
-