PASCO TD-8556A is a steam generator designed for the student lab. It is an efficient source of steam and hot water thanks to its one liter stainless steel tank and a variable output of up to 400 Watts. Its dangers of overheating are eliminated by a thermal circuit breaker that disconnects power if the water boils dry. Operation is simple. Just plug the unit into a standard outlet, fill the tank approximately 1/2 to 3/4 full of water, and place the rubber stopper over the top. Flip the ON/OFF switch to ON. The switch will light to show that power is entering the unit.
PASCO TD-8556A is a steam generator designed for the student lab. It is an efficient source of steam and hot water thanks to its one liter stainless steel tank and a variable output of up to 400 Watts. Its dangers of overheating are eliminated by a thermal circuit breaker that disconnects power if the water boils dry. Operation is simple. Just plug the unit into a standard outlet, fill the tank approximately 1/2 to 3/4 full of water, and place the rubber stopper over the top. Flip the ON/OFF switch to ON. The switch will light to show that power is entering the unit.
PASCO TD-8556A is a steam generator designed for the student lab. It is an efficient source of steam and hot water thanks to its one liter stainless steel tank and a variable output of up to 400 Watts. Its dangers of overheating are eliminated by a thermal circuit breaker that disconnects power if the water boils dry. Operation is simple. Just plug the unit into a standard outlet, fill the tank approximately 1/2 to 3/4 full of water, and place the rubber stopper over the top. Flip the ON/OFF switch to ON. The switch will light to show that power is entering the unit.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI