FaceTime Unified Security Gateway Quick start guide

Brand: FaceTime

Model: Unified Security Gateway

Type: Quick start guide

Unified Security Gateway Quick Start Guide

Communications, Inc.







Unified Security Gateway Quick Start Guide

Communications, Inc.

Unified Security Gateway Quick Start Guide

Communications, Inc.

Cabling Unified Security Gateway

1. Connect the power cord to the power source.

2. Connect an Ethernet cable from the SPAN/TAP

port of your switch to Line1, which is the

monitoring interface of the security appliance.

3. Connect another Ethernet cable from the LAN

to Line2. The security appliance uses this port

for the proxy and management tasks. You need

to configure network settings for this port using

the steps listed in the Initial Setup section.

Power

Socket

Mouse

Keyboard

Video

LINE 1

(Monitor Interface)

LINE 2

(Management/Proxy Port)

Initial Setup

1. Connect a monitor to the video input socket.

2. Connect a keyboard to the keyboard input

socket.

3. Switch on the power using the Power button

on the front panel.

The Boot screen appears. The screen times-out

after 3 seconds.

4. When prompted to configure the management

port (eth1), press Y.

5. Perform one of the following actions:

If you want to assign a static IP address:

a. Specify an IP address (for example,

10.0.2.201).

b. Specify the Netmask (for example,

255.0.0.0).

c. Specify the default gateway (IP) (for

example, 10.0.0.1).

d. Specify the Primary DNS server (for

example, 10.0.2.1).

e. Select OK.

If you want to assign a dynamic IP address:

a. Select DHCP.

b. Select OK.

The Linux terminal displays the IP address—

static or dynamic—assigned to the appliance.

Note down this IP address to access the Web-

based user interface of the security appliance.

Initial Configuration

1. Access the administrative user interface by

typing the following URL in the Web browser:

https://<IP Address>:8443/

2. Perform the following actions when your web

browser displays the following SSL-related

alerts:

 Click OK if you see the Secure Connection

alert.

 Click Yes when you get the digital certificate

alert.

3. Read the End User License Agreement (EULA)

and click Accept to accept the EULA.

4. On the System Administrative Password page,

type the administrative password for the

sysadmin user in the Password box and

confirm the password in the Confirm Password

box.

5. Log on to the user interface with the

administrative credentials.

6. Go to the Configuration tab » Server

Administration panel » click Network Settings

to open the Network Settings page.

7. Specify the following details:

 Host Name of the security appliance.

 The domain name to which the security

appliance belongs.

 The Primary DNS server.

8. Go to the Configuration tab » Authentication

and Authorization panel » click

Authentication Settings to open the

Authentication Settings page.

9. Specify the Primary Domain Controller to which

the appliance must send user authentication

requests.

10. Upgrade to the latest Firmware image. This

allows you to run the security appliance using

the most recent release with the latest Malware,

IM, and P2P protocols, and report updates.

To obtain firmware updates, perform the

following steps:

a. Download the update package on to the

security appliance. You can schedule a

regular download of updates or download

the update package manually on to the

security appliance.

b. Upgrade the firmware.

For detailed instructions, see the ‘Obtaining

Firmware Updates’ section in the Unified

Security Gateway System Administrator’s

Guide.

11. Download the latest Anti-Malware filter updates:

a. Go to the Configuration tab » Maintenance

panel. Click Malware Updates to open the

Malware Updates page.

b. Type the following URL in the URL for

Updates box in the Update Settings

section:

http://usg.facetime.net/usg/urlupdates/

ftupdate

c. Click Get Latest Filters.

d. Click Install & Restart Now on the Malware

Filters Updates: Get Latest page.

12. Exempt trusted destination servers from being

analyzed by the security appliance. For

instructions, see to the Unified Security

Gateway System Administrator’s Guide.

Rear Panel of the Appliance

Note:If you do not specify an IP address, the IP

address 192.168.1.3 is automatically assigned to the

appliance.

Note:Ignore the Login prompt in the terminal

window and proceed with the instructions in the

Initial Configuration section.

Note:After you specify the Primary DNS server and

the domain name for the security appliance, the

FaceTime webfiltering database starts getting

downloaded on to the system.

Unified Security Gateway Quick Start Guide

Communications, Inc.

Unified Security Gateway Quick Start Guide

Communications, Inc.





Communications, Inc.

Verification

To verify whether the security appliance has been set

up successfully:

1. Select the Real time Usage View option on the

Dashboard tab.

2. Notice the counters in the Real-Time Traffic

Summary panel increase as security appliance

gets the data feed from the SPAN port.

Factory Default

To reset the configuration of the security appliance to

factory default settings:

1. Go to the Configuration tab »

Troubleshooting Toolspanel » click Shut

Down/Restart open the Shut Down/Restart

page.

2. Select Restart System.

3. Click Restart.The Boot screen appears on the

monitor connected to the security appliance.

The screen times-out after 3 seconds.

4. Press any key within 3 seconds.

5. Select Factory Default.

 Web Filtering, Malware, IM, and P2P security

policies

 Web Filtering, Malware, IM, and P2P usage

statistics

 Any custom groups, employees, and buddy

names that were created in the system

Powering Off

The unit can be shut down using the Web-based

administration interface. Do the following to shut

down the unit:

1. Go to the Configuration tab »

Troubleshooting Tools panel » click Shut

Down/Restart to open the Shut Down/Restart

page.

2. Select Shut Down System.

3. Click Shut Down.

FaceTime Communications

1301 Shoreway, Suite 275, Belmont, CA 94002, USA

Customer Support

Phone: (650)631-6400

E-mail: [email protected]

Documentation

For the latest version of

Unified Security Gateway System Administrator’s

Guide, visit:

http://usg.facetime.net/usg/

General Information: [email protected]

Press: [email protected]

Sales: [email protected]

rights reserved.

Not for use or distribution without the express permission of

FaceTime Communications. FaceTime, the FaceTime logo

and Unified Security Gateway are trademarks of FaceTime

Communications, Inc. in the United States and other

countries. All other names mentioned in this document may

be trademarks of their respective owners.

Part Number:4B-10-QSG02-080616

Caution:When you select Factory Default

settings, the following configuration settings will

be deleted from the system:

Note:You can also power off the unit manually

by pressing the Power button on the

front panel for about 8 to 9 seconds.

Unified Security Gateway

Quick Start Guide

FaceTime Unified Security Gateway Quick start guide

Brand: FaceTime

Model: Unified Security Gateway

Type: Quick start guide

Download PDF

report

FaceTime Unified Security Gateway Quick start guide

FaceTime Unified Security Gateway Quick start guide

Other documents