2. L.A. Steelcraft
  3. LA-PN204-RB15

L.A. Steelcraft LA-PN204-RB15 Installation guide

  • Hello! I've reviewed the installation instructions for the Steelcraft Tip and Roll Wheel Caster and Frame Pad system, model LA-PN203-RB15. This document details the procedure for mounting the wheels and frame pads, including using the provided spacers, bolts, washers and nuts. I'm ready to answer your questions about the installation process and components used.
  • What material are the frame pads made of?
    What are the dimensions of the caster wheels?
    How many washers should each caster wheel get?
    What should I do if the rotation of the caster wheel is interfering?
A
DETAIL A
1
3
5
4
B
C
DETAIL B
4
55
2
DETAIL C
2
5
5
4
Install transport system: mount the wheels and frame pads as shown. Frame pads are made of
2-1/2" x 1" thick plastic. Pads have counter sunk holes and are attached with flathead bolts.
Caster wheels with brakes are 1" thick x 4" high wheels on a swivel base.
Each caster wheel gets (2) washers and a nut.
If there is interference of the rotation of the caster wheel, remove a washer from caster wheel.
PRODUCT NAME
TIP AND ROLL WHEEL CASTER/FRAME PAD
INSTALLATION INSTRUCTIONS
MODEL NO.
LA-PN203-RB15
Date: 11/14/22
Rev:
Drawn: CW
Sheet: 1 of 1
21
3/8" FLAT WASHER
HWFLWA38
15
3/8-16 NYLOCK INSERT NUT
HWLN38
9
3/8-16 x 1-1/4" FLAT HEAD SOCKET CAP SCREW 18.8
HWFLHD38114
6
CASTER WHEEL WITH BRAKE 3/8-16 x 1-1/2" STEM x 4"
VCITPNRCWL
9
2.5" X 1.0" UHMW ROLLER SPACER PAD
VCITIPNROLLSPACER
5
4
3
2
1
QTY.
DESCRIPTION
PART NUMBER
ITEM
NO.
/