2. PROception
  3. PROHDMIAUDEXT11-B

PROception PROHDMIAUDEXT11-B Operating instructions

  • Hello! I'm a chat assistant that has read the user manual for the Blake Audio Extractor PROHDMIAUDEXT11. This document details how to set up the device including checking power, connections, cables and the audio mode switch settings. I'm ready to answer your questions about this device, its features and operation.
  • What should I check if the device is not working?
    How can I resolve connection issues?
    How do I change the audio mode?
PROHDMIAUDEXT11
Subject to change without prior nocaon ©Blake-UK2016 E&OE All Rights Reserved 1
8
4K EDID Seng Audio Extractor
2
Notes:
7
centre
6 3
Contents:
the three options of audio
modes by adjusting the switch.
1. Check if the power adaptor is inserted correctly.
2. Check the power switch is on.
1. Make sure the TV is on and has been connected to
the device correctly.
2. Check that the signal source is on and connected
correctly.
3. Check the quality of the connection.
4. Check the quality of the line.
5. Check the quality of the cables.
1. Disconnect and reconnect the cables.
2. Check the quality of the HDMI cables.
1. Check the audio mode switch is on the correct
setting.
4 5
/