Prorack PR3110 Operating instructions

Type
Operating instructions

Prorack PR3110 is a 21 mm Slot Adapter designed to mount carriers to crossbars. It is compatible with both removable T-Bolt and fixed/drop-and-turn carriers. The adapter ensures a secure connection between the carrier and the crossbar. It is easy to install and remove, making it convenient for use with different carriers. Here's how you can use it:

  1. Check your carrier's mounting instructions to determine if it has a removable T-Bolt or fixed/drop-and-turn design.
  2. For removable T-Bolt carriers:
    • Remove the T-Bolt from your carrier.
    • Disassemble the Slot Adapter by removing the rubber spring.

Prorack PR3110 is a 21 mm Slot Adapter designed to mount carriers to crossbars. It is compatible with both removable T-Bolt and fixed/drop-and-turn carriers. The adapter ensures a secure connection between the carrier and the crossbar. It is easy to install and remove, making it convenient for use with different carriers. Here's how you can use it:

  1. Check your carrier's mounting instructions to determine if it has a removable T-Bolt or fixed/drop-and-turn design.
  2. For removable T-Bolt carriers:
    • Remove the T-Bolt from your carrier.
    • Disassemble the Slot Adapter by removing the rubber spring.
Page 1 of 5
PR3076 - Rev2
21 mm Slot Adapter
Kit Contents
Caution
Tie down long or wide loads at the front and rear of the vehicle with non-elastic straps. If it looks like it can catch
some air, it will. TIE IT DOWN!
When loading your surf gear or kayak, ensure that it is mounted correctly using the tie downs provided and is
positioned centrally, parallel to the vehicle.
Check straps periodically during travel and tighten if necessary. Replace any straps that are worn or frayed before
using (see your Prorack dealer).
Important Warning
It is critical that all Prorack racks and accessories be properly and securely attached to your vehicle. Improper
attachment could result in an automobile accident, and could cause serious bodily injury or death to you or to others.
You are responsible for securing the racks and accessories to your car, checking the attachments prior to use, and
periodically inspecting the products for adjustment, wear, and damage. Therefore, you must read and understand all
of the instructions and cautions supplied with your Prorack product prior to installation or use.
If you do not understand all of the instructions and cautions, or if you have no mechanical experience and are not
thoroughly familiar with the installation procedures, you should have the product installed by a professional installer
such as a boat carrier specialist.
1
2
Item Component Qty
121 mm Slot Adapter Base 1
2Slot Adapter Spring 1
1Check Carrier Mounting Instructions
Check your mounting instructions for your carrier. Does it have (A) a removeable T-Bolt or (B) a xed/drop
and turn?
Page 1 of 4
HEADER TEXT
Nil
21MM SLOT ADAPTER KIT
FIRST TIME INSTALLATION
Please read instructions carefully before installation.
Check the contents of kit. Contact your dealer if any parts appear missing or damaged.
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL RACKS AND ACCESSORIES BE PROPERLY AND SECURELY ATTACHED
TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN AUTOMOBILE ACCIDENT,
AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH TO YOU OR TO OTHERS. YOU ARE
RESPONSIBLE FOR SECURING THE RACKS AND ACCESSORIES TO YOUR CAR, CHECKING
THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR
ADJUSTMENT, WEAR, AND DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF
THE INSTRUCTIONS AND CAUTIONS SUPPLIED WITH YOUR PRODUCT PRIOR TO INSTALLATION OR
USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE
NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE INSTALLATION
PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER
SUCH AS A ROOF RACK SPECIALIST.
KIT CONTENTS
Item Component QTY
1 Adapter Base 4
2 Rubber Spring 4
80-13-030 Rev 1
TOOLS REQUIRED
Check your mounting instructions for your carrier. Does it have (A) a removable T-Bolt
or (B) a xed/drop-and-turn?
CHECK CARRIER MOUNTING INSTRUCTIONS
1A1 Remove T-Bolt from your carrier as per your carrier’s instructions.
REMOVABLE T-BOLT SPECIFIC STEPS
2
1
(A) (B)
Please follow steps specic for (A) or (B).
Please follow steps specic for (A) or (B).
Page 2 of 5
PR3076 - Rev2
A1 Remove T-Bolt from your carrier as per your
carrier’s instructions
A2 Disassemble Slot Adapter
Remove rubber spring from adapter base, if not already disassembled.
A3 Insert T-Bolt
Insert T-Bolt into each adapter base as
shown
A4 Insert T-Bolt
After inserting T-Bolt,
reinsert rubber spring as
shown.
Removable T-Bolt Specic Steps
Page 1 of 4
HEADER TEXT
Nil
21MM SLOT ADAPTER KIT
FIRST TIME INSTALLATION
Please read instructions carefully before installation.
Check the contents of kit. Contact your dealer if any parts appear missing or damaged.
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL RACKS AND ACCESSORIES BE PROPERLY AND SECURELY ATTACHED
TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN AUTOMOBILE ACCIDENT,
AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH TO YOU OR TO OTHERS. YOU ARE
RESPONSIBLE FOR SECURING THE RACKS AND ACCESSORIES TO YOUR CAR, CHECKING
THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR
ADJUSTMENT, WEAR, AND DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF
THE INSTRUCTIONS AND CAUTIONS SUPPLIED WITH YOUR PRODUCT PRIOR TO INSTALLATION OR
USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE
NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE INSTALLATION
PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER
SUCH AS A ROOF RACK SPECIALIST.
KIT CONTENTS
Item Component QTY
1 Adapter Base 4
2 Rubber Spring 4
80-13-030 Rev 1
TOOLS REQUIRED
Check your mounting instructions for your carrier. Does it have (A) a removable T-Bolt
or (B) a xed/drop-and-turn?
CHECK CARRIER MOUNTING INSTRUCTIONS
1A1 Remove T-Bolt from your carrier as per your carrier’s instructions.
REMOVABLE T-BOLT SPECIFIC STEPS
2
1
(A) (B)
Please follow steps specic for (A) or (B).
Page 3 of 5
PR3076 - Rev2
A5 Insert Slot Adapter into Crossbar
Insert slot adapter into bar by angling in and psuhing down as shown. Ensure T-Bolt is upright. Repeat
for as many T-Bolts as your carrier has.
A6 Refer to Carrier’s Instructions
Follow the process in your carrier’s instructions for securing to T-Bolts.
B1 Ensure rubber spring is attached to the adapter
base.
B2 Insert Slot Adapter into Crossbar
Insert slot adapter into bar by angling in and pushing down with your nger as shown. Repeat for as
many T-Bolts as your carrier has.
Fixed/Drop-And-Turn Specic Steps
Page 4 of 5
PR3076 - Rev2
B4 Refer to Carrier’s Instructions
Follow the process in your carrier’s instructions for securing to T-Bolts.
B3 Positionb Adapters
Appropriately
Position adapters so they
can engage with the carrier’s
T-Bolts.
Ensure Carrier is Secure
A7 After instalation, ensure your carrier is secure.
A8 For Removal - Removable
T-Bolt Specic Step
For removal, push the slot
adapter down, tilt and
remove.
B5
Page 5 of 5
PR3076 - Rev2
Prorack
17 Hinkler Court, Brendale
QLD 4500, Australia
Freephone
AU: 1800 143 548 www.prorack.com.au
NZ: 0800 4776 722 www.prorack.co.nz
ALL CONTENT SUBJECT TO YAKIMA AUSTRALIA PTY LTD COPYRIGHT © 2017
B6 For Removal - Fixed/Drop-and-turn
Specic Step
For removal, push the slot adapter
down, tilt and remove.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Prorack PR3110 Operating instructions

Type
Operating instructions

Prorack PR3110 is a 21 mm Slot Adapter designed to mount carriers to crossbars. It is compatible with both removable T-Bolt and fixed/drop-and-turn carriers. The adapter ensures a secure connection between the carrier and the crossbar. It is easy to install and remove, making it convenient for use with different carriers. Here's how you can use it:

  1. Check your carrier's mounting instructions to determine if it has a removable T-Bolt or fixed/drop-and-turn design.
  2. For removable T-Bolt carriers:
    • Remove the T-Bolt from your carrier.
    • Disassemble the Slot Adapter by removing the rubber spring.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI