Sony DCR-HC21 User manual

Category
Camcorders
Type
User manual
Digital Video Camera Recorder
Operating Guide
DCR-HC21
2-584-905-11 (1)
Getting Started
Using the Menu
Dubbing/Editing
Using a Computer
Troubleshooting
Additional Information
© 2005 Sony Corporation
Recording/
Playback
31
48
53
63
77
9
18
DCR-HC21 2-584-905-11(1)
2
DCR-HC21 2-584-905-11(1)
Read this first
Before operating the unit, please read this
manual thoroughly, and retain it for future
reference.
WARNING
To prevent fire or shock hazard,
do not expose the unit to rain or
moisture.
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Notice
If static electricity or electromagnetism causes
data transfer to discontinue midway (fail), restart
the application or disconnect and connect the
communication cable (USB, etc.) again.
For customers in the U.S.A. and
CANADA
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are
recyclable. You can help preserve
our environment by returning
your used rechargeable batteries
to the collection and recycling
location nearest you.
For more information regarding recycling of
rechargeable batteries, call toll free 1-800-822-
8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking
Lithium-Ion batteries.
Battery pack
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This Class B digital apparatus complies with
Canadian ICES-003.
For customers in the U.S.A.
If you have any questions about this product, you
may call:
Sony Customer Information Center 1-800-222-
SONY (7669).
The number below is for the FCC related matters
only.
Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-HC21
Responsible Party: Sony Electronics Inc.
Address: 16450 W. Bernardo Dr, San Diego, CA
92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
3
DCR-HC21 2-584-905-11(1)
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Note
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If
this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
The supplied interface cable must be used with
the equipment in order to comply with the limits
for a digital device pursuant to Subpart B of Part
15 of FCC Rules.
Owner’s Record
The model and serial numbers are located on the
bottom. Record the serial number in the space
provided below. Refer to these numbers whenever
you call your Sony dealer regarding this product.
Model No. DCR-HC21
Serial No.
Model No. AC-
Serial No.
Notes on use
Your camcorder is supplied with two
kinds of operations guides.
“Operating Guide” (This manual)
“First Step Guide” for using the supplied
software (stored on the supplied CD-
ROM)
On the types of recording media you
can use in your camcorder
A mini DV cassette marked with
(mini DV cassettes with Cassette Memory
are incompatible) (p. 78).
On using the camcorder
Do not hold the camcorder by the
following parts.
Viewfinder LCD Panel
Battery pack
Before connecting your camcorder to
another device with a USB or i.LINK
cable, be sure to insert the connector
plug in the proper direction. If you insert
the connector plug forcibly in the wrong
direction, the terminal may be damaged,
or this may cause a malfunction of your
camcorder.
Continued
4
DCR-HC21 2-584-905-11(1)
On the menu items, the LCD panel,
viewfinder, and lens
A menu item that is grayed out is not
available under the current recording or
playback conditions.
The LCD screen and the viewfinder are
manufactured using extremely high-
precision technology, so over 99.99% of
the pixels are operational for effective
use. However, there may be some tiny
black points and/or bright points (white,
red, blue, or green in color) that appear
constantly on the LCD screen and the
viewfinder. These points are normal
results of the manufacturing process and
do not affect the recording in any way.
Exposing the LCD screen, the viewfinder,
or the lens to direct sunlight for long
periods of time may cause malfunctions.
Do not aim at the sun. Doing so might
cause your camcorder to malfunction.
Take pictures of the sun only in low light
conditions, such as at dusk.
On recording
Before starting to record, test the
recording function to make sure the
picture and sound are recorded without
any problems.
Compensation for the contents of
recordings cannot be provided, even if
recording or playback is not possible
due to a malfunction of the camcorder,
storage media, etc.
TV color systems differ depending on
the countries/regions. To view your
recordings on a TV, you need an NTSC
system-based TV.
Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the copyright laws.
On this manual
The images of the LCD screen and
the viewfinder used in this manual for
illustration purposes are captured using
a digital still camera, and therefore may
appear different.
The on-screen displays in each local
language are used for illustrating the
operating procedures. Change the screen
language before using your camcorder if
necessary (p. 45).
About the Carl Zeiss lens
Your camcorder is equipped with a Carl
Zeiss lens, which was developed jointly
by Carl Zeiss, in Germany, and Sony
Corporation, and produces superior images.
It adopts the MTF* measurement system
for video cameras and offers a quality
typical of a Carl Zeiss lens.
* MTF stands for Modulation Transfer
Function. The number value indicates the
amount of light from a subject coming into
the lens.
5
DCR-HC21 2-584-905-11(1)
6
DCR-HC21 2-584-905-11(1)
Table of Contents
Getting Started
Step 1: Checking supplied items ...............................................................9
Step 2: Charging the battery pack ...........................................................10
Step 3: Turning the power on and holding your camcorder firmly ...........13
Step 4: Adjusting the LCD panel and viewfinder .....................................14
Step 5: Using the touch panel .................................................................15
Changing the language setting .....................................................................15
Checking the screen indicators (Display Guide) ...........................................15
Step 6: Setting the date and time ............................................................16
Step 7: Inserting a cassette ....................................................................17
Recording/Playback
Recording/Playback with ease (Easy Handycam) ...................................18
Recording ................................................................................................20
Playback ..................................................................................................21
Functions used for recording/playback, etc. ............................................22
Recording
To use zoom
To record in dark places (NightShot plus)
To adjust the exposure for backlit subjects
To adjust the focus for an off center subject (SPOT FOCUS)
To fix the exposure for the selected subject (Flexible spot meter)
To record in mirror mode
To use a tripod
Playback
To play back the images with added special effects
Recording/Playback
To check the remaining battery (Battery Info)
To turn off the operation confirmation beep
To initialize the settings
Other part names and functions
Indicators displayed during recording/playback .......................................24
Searching for the starting point ...............................................................26
Searching for the last scene of the most recent recording (END SEARCH)
.............................................................................................................26
Searching manually (EDIT SEARCH) .............................................................26
Reviewing the most recently recorded scenes (Rec review) .........................26
7
DCR-HC21 2-584-905-11(1)
Remote Commander ...............................................................................28
Searching quickly for a desired scene (Zero set memory) ............................28
Searching for a scene by date of recording (Date search) ...........................29
Searching for a still image (Photo search) .....................................................29
Playing back still images in sequence (Photo scan) .....................................29
Playing the picture on a TV .....................................................................30
Using the Menu
Using the menu items ............................................................31
Operation button items ............................................................................32
Menu items ..............................................................................................38
MANUAL SET menu ........................................................................40
– PROGRAM AE/P EFFECT, etc.
CAMERA SET menu .......................................................................42
– D ZOOM/WIDE SEL/STEADYSHOT, etc.
VCR SET menu ...............................................................................43
– HiFi SOUND/AUDIO MIX
LCD/VF SET menu ..........................................................................44
– LCD B.L./LCD COLOR/VF B.L., etc.
TAPE SET menu ..............................................................................45
– REC MODE/AUDIO MODE/REMAIN
SETUP MENU menu .......................................................................45
– CLOCK SET/USB STREAM/LANGUAGE, etc.
OTHERS menu ................................................................................46
– WORLD TIME/BEEP, etc.
Dubbing/Editing
Connecting to a VCR or TV .....................................................................48
Dubbing to other recording devices .........................................................49
Recording pictures from a VCR ..............................................................50
Dubbing sound to a recorded tape ..........................................................50
Jacks to connect external devices ...........................................................52
Using a Computer
Before referring to the “First Step Guide” on your computer ...................53
Installing the software and “First Step Guide” on a computer .................55
Viewing “First Step Guide” .......................................................................59
Continued
8
DCR-HC21 2-584-905-11(1)
Creating a DVD (Direct Access to “Click to DVD”) ...................................60
Troubleshooting
Troubleshooting .......................................................................................63
Warning indicators and messages ..........................................................74
Additional Information
Using your camcorder abroad .................................................................77
Usable cassette tapes .............................................................................78
About the “InfoLITHIUM” battery pack .....................................................79
About i.LINK ............................................................................................80
Maintenance and precautions .................................................................81
Using the Strap Belt as a wrist strap .......................................................84
Attaching the Shoulder Strap .................................................................85
Specifications ..........................................................................................85
Index ........................................................................................................87
9
Getting Started
DCR-HC21 2-584-905-11(1)
Step 1: Checking supplied items
Make sure that you have following items
supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
AC Adaptor (1) (p. 10)
Power cord (1) (p. 10)
Wireless Remote Commander (1)
(p. 28)
A button-type lithium battery is already installed.
A/V connecting cable (1) (p. 30, 48)
USB cable (1) (p. 53)
Shoulder Strap (1) (p. 85)
Rechargeable battery pack NP-FP30 (1)
(p. 10, 79)
CD-ROM “Picture Package Ver.1.5” (1)
(p. 53)
Shoe cover (1)
Attached to the camcorder.
Operating Guide (This manual) (1)
10
DCR-HC21 2-584-905-11(1)
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (P series) (p. 79) after
attaching it to your camcorder.
POWER switch
DC IN jack
DC plug
AC Adaptor
To the wall outlet
1 Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
2 Slide the POWER switch up to
OFF (CHG). (The default setting.)
3 Connect the AC Adaptor to the
DC IN jack on your camcorder.
DC IN jack
4 Connect the power cord to the AC
Adaptor and the wall outlet.
CHG (charge) lamp
The CHG (charge) lamp lights up and
charging starts.
5 The CHG (charge) lamp turns off
when the battery is fully charged.
Disconnect the AC Adaptor from
the DC IN jack.
To remove the battery pack
Turn off the power, then press PUSH button
and remove the battery pack.
With the mark
facing down
11
Getting Started
DCR-HC21 2-584-905-11(1)
PUSH button POWER switch
When storing the battery pack
Fully discharge the battery before storing it
for an extended period (p. 79).
To use an outside power source
You can operate your camcorder using the
power from the wall outlet by making the
same connections as you do when charging
the battery pack. The battery pack will not
lose its charge in this case.
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Battery pack Charging time
NP-FP30 (supplied) 115
NP-FP50 125
NP-FP70 155
NP-FP90 220
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FP30
(supplied)
80
105
40
50
NP-FP50 115
150
55
75
NP-FP70 240
310
120
155
NP-FP90 435
550
215
275
All times measured under the following
conditions:
Top: Recording with LCD screen.
Bottom: Recording with viewfinder LCD panel
closed.
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
Playing time
Approximate time (min.) available when
you use a fully charged battery pack.
Battery pack
LCD panel
opened
LCD panel
closed
NP-FP30
(supplied)
95 120
NP-FP50 135 170
NP-FP70 280 350
NP-FP90 500 620
On the battery pack
Before changing the battery pack, slide the
POWER switch up to OFF (CHG).
The CHG (charge) lamp flashes during
charging, or the battery information (p. 23) will
not be correctly displayed under the following
conditions.
The battery pack is not attached correctly.
The battery pack is damaged.
The battery pack is fully discharged. (For
Battery Info only.)
The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
power cord is disconnected from the wall outlet.
On the charging/recording/playback time
The recording and playback time will be
shorter when you use your camcorder in low
temperatures.
The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
Times measured with the camcorder at
25°C (77°F). (10 - 30 °C (50 - 86°F) is
recommended.)
Continued
12
DCR-HC21 2-584-905-11(1)
On the AC Adaptor
Use the nearby wall outlet when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall outlet immediately if any malfunction
occurs while using your camcorder.
Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
PRECAUTION
Even if your camcorder is turned off, AC power
(house current) is still supplied to it while
connected to the wall outlet via the AC Adaptor.
13
Getting Started
DCR-HC21 2-584-905-11(1)
Step 3: Turning the power on and holding your
camcorder firmly
To record or play back, slide the POWER
switch repeatedly to turn on the respective
lamp.
When using it for the first time, the
CLOCK SET screen appears (p. 16).
LENS COVER switch
POWER switch
1 Slide the LENS COVER switch to
OPEN.
2 Slide the POWER switch
repeatedly in the direction of the
arrow to turn on the respective
lamp.
If the POWER switch is set to OFF
(CHG), slide it down while pressing the
green button.
Lamps that light up
CAMERA: To record on a tape.
PLAY/EDIT: To play or edit pictures.
When you slide the POWER switch to turn on
the CAMERA lamp, the current date and time
will be displayed on the screen for about 5
seconds.
3 Put your wrist through the Strap
Belt.
The length of the Strap Belt is
adjustable.
4 Hold the camcorder as illustrated
below.
To turn off the power
Slide the POWER switch up to OFF
(CHG).
At the time of purchase, the power will be
set to turn off automatically if you leave your
camcorder without any operation attempted for
approximately 5 minutes, to save battery power.
([A.SHUT OFF], p. 46).
14
DCR-HC21 2-584-905-11(1)
Step 4: Adjusting the LCD panel and viewfinder
The LCD panel
Open the LCD panel 90 degrees to the
camcorder (), then rotate it to the best
angle to record or play ().
2
1
180 degrees
(max.)
90 degrees to
the camcorder
90 degrees (max.)
Do not press the buttons on the LCD frame
accidentally when you open or adjust the LCD
panel.
If you rotate the LCD panel 180 degrees to the
lens side, you can close the LCD panel with
the LCD screen facing out. This is convenient
during playback operations.
If you rotate the LCD panel 180 degrees to
the lens side, you can see the image in the
viewfinder.
See [LCD BRT] (p. 34) to adjust the brightness
of the LCD screen.
The viewfinder
You can view images using the viewfinder
when you close the LCD panel to avoid
wearing down the battery, etc.
Viewfinder
Viewfinder lens adjustment lever
Move it until the picture is clear.
You can adjust the brightness of the viewfinder
backlight by selecting [LCD/VF SET]
- [LCD B.L.] (p. 44).
You can adjust the [FADER] and the
[EXPOSURE] setting using the viewfinder. (p.
33)
15
Getting Started
DCR-HC21 2-584-905-11(1)
Step 5: Using the touch panel
You can play back recorded pictures (p.
21), or change the settings (p. 31) using the
touch panel.
Place your hand on the rear side of
the LCD panel to support it. Then,
touch the buttons displayed on the
screen.
DISP/BATT INFO
Touch the button on the LCD screen.
Perform the same actions as explained above
when you press the buttons on the LCD frame.
Be careful not to press buttons on the LCD
frame accidentally while using the touch panel.
To hide the screen indicators
Press DISP/BATT INFO to toggle the
screen indicators (such as time code, etc.)
on or off.
Changing the language setting
You can change the on-screen displays to
show messages in a specified language.
Select the screen language in [
LANGUAGE] on the (SETUP MENU)
(p. 31, 45).
Checking the screen indicators
(Display Guide)
You can easily check the meaning of each
indicator that appears on the LCD screen.
1 Touch .
0: 0 0:0 0
SPOT
FOCUS
FOCUS
MENU FADER END
SCH
EXPO–
SURE
SPOT
METER
DISP
GUIDE
PAGE1 PAGE2
60 min ST B Y
2 Touch [DISP GUIDE].
Select a rea for guide.
DISP GUIDE
END
3 Touch the area including the
indicator that you want to check.
DISP GUIDE STBY
END
EXPOSURE:
MANUAL
FOCUS:
MANUAL
(
NEAR
)
BACK LIGHT:
ON
1/ 3
RET.PAGEPAGE
The meanings of the indicators in the
area are listed on the screen. If you
cannot find the indicator you want to
check, touch [PAGE ]/[PAGE ] to
toggle.
When you touch [ RET.], the screen
returns to the area selecting display.
To finish the operation
Touch [END].
16
DCR-HC21 2-584-905-11(1)
Step 6: Setting the date and time
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the CLOCK SET
screen appears every time you turn on your
camcorder.
If you do not use your camcorder for about
3 months, the built-in rechargeable battery
gets discharged and the date and time settings
may be cleared from the memory. In that case,
charge the rechargeable battery and then set the
date and time again (p. 83).
POWER switch
Skip to step 4 when you set the clock for
the first time.
1 Touch
[MENU].
MANUAL SET
PROGRAM AE
P EFFECT
FLASH MODE
FLASH LVL
AUTO SHTR
EXEC
RET.
2 Select SETUP MENU with
/ , then touch [EXEC].
SETUP MENU
CLOCK SET
USB STREAM
LANGUAGE
DEMO MODE
EXEC
RET.
--
:
--
:
--
3 Select [CLOCK SET] with
/ , then touch [EXEC].
CLOCK SET
Y M D H M
OK
2 0 0 5 JAN 1
:
0 0
12
AM
4 Set [Y] (year) with / ,
then touch .
You can set any year up to the year
2079.
CLOCK SET
OK
Y M D H M
2 0 0 5
J A N
:
0 0
AM
1 1 2
5 Set [M] (month), [D] (day), [H]
(hour) and [M] (minute), then
touch .
For midnight, set it to 12:00 AM.
For midday, set it to 12:00 PM.
The clock starts.
17
Getting Started
DCR-HC21 2-584-905-11(1)
Step 7: Inserting a cassette
You can use mini DV cassettes only
(p. 78).
The recordable time varies depending on [REC
MODE] (p. 45).
1 Slide the OPEN/EJECT lever
and open the lid.
OPEN/EJECT
lever
Lid
The cassette compartment automatically
comes out and opens up.
2 Insert a cassette with its window
facing up, then press .
Window-side
Push the center of the back of the
cassette lightly.
The cassette compartment automatically
slides back in. Do not force the cassette
into the compartment. This may cause a
malfunction.
3 Close the lid.
To eject the cassette
Proceed with the same steps as you would
when inserting a cassette tape.
18
DCR-HC21 2-584-905-11(1)
Recording/Playback with ease
(Easy Handycam)
With this Easy Handycam operation, most of
the camera settings are automatically adjusted
optimally, which frees you from detailed
adjustment.
Since only basic functions become available and
screen font size increases for easy viewing, even
first time users can enjoy easy operation.
Go through the procedures described in steps 1 to
7 (p. 9 to 17) before operation.
C
D
B
A
Recording with ease
1 Slide the POWER switch in the direction of the arrow to turn on the
CAMERA lamp.
If the POWER switch is set to
OFF (CHG), slide it down while
pressing the green button.
2 Press EASY
.
The EASY lamp
lights up in blue.
Easy Handycam
operation
ON
The message appears.
3 Start recording.
Press REC START/STOP (or ).
The indicator () changes [STBY] to
[REC].
To stop recording, press (or ) again.
The picture is recorded in the SP mode (p.
45).
Open the lens cover.
19
Recording/Playback
DCR-HC21 2-584-905-11(1)
Playing back with ease
1 Slide the POWER switch in the direction
of the arrow repeatedly to turn on the PLAY/EDIT lamp.
2 Press EASY .
The EASY lamp
lights up in blue.
Easy Handycam
operation
ON
The message appears.
3 Start playing back.
Touch , then touch to start playback.
A
B
C
To cancel Easy Handycam operation
Press EASY again.
The EASY lamp turns off and all the settings are returned to the previous situation.
When you touch and MENU during Easy Handycam operation, only the available functions are
displayed on the screen and the functions which don’t appear go back to the default setting (p. 32, 38).
You can use the following functions during playback:
Playing the picture on a TV (p. 30)
Dubbing to other recording devices (p. 49)
During Easy Handycam operation, the following buttons are not available:
BACK LIGHT
PHOTO
[Invalid during Easy Handycam operation] appears if operations not available during Easy Handycam are
attempted.
Stop
Play/Pause toggles as you touch it
Rewind/Fast forward
20
DCR-HC21 2-584-905-11(1)
Recording
LENS COVER PHOTO
POWER switch
REC START/
STOP
REC START/
STOP
1 Slide the POWER switch in the direction of the arrow to turn on the
CAMERA lamp.
If the POWER switch is set to OFF (CHG), slide it
down while pressing the green button.
2 Start recording.
Movies
Press REC START/STOP
(or
).
The indicator () changes [STBY] to
[REC].
Still images
Press and hold PHOTO lightly to
check the image (), then press it
fully ().
CAPTUR E
A B
Indicator appears
A shutter sound is heard, and the image
is recorded with sound for 7 seconds.
To stop movie recording
Press REC START/STOP again.
appears when the tape photo recording
does not work.
Slide the LENS COVER
switch to OPEN.
1 / 1

Sony DCR-HC21 User manual

Category
Camcorders
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document