Note: It is highly recommended to have a
licensed contactor preform the installation.
8. Apply a thick bead of silicone around the area
the silicon to set.
5. Align and connect the tub’s drain to the waste
drain outlet.
and waste drain covers.
4. Adjust leveling feet if needed to ensure the tub is
complete leveled. If the tub is not properly level
leakage may occure and/or the water will not
completelly drain.
1. Remove the tub from it’s crate/box.
2. Make sure to avoid contact with any rough surface.
Ideally, there should be a tarp or cardboard sheet
3. Very Important! Before proceeding with installation,
leakage. If leakage occures this maybe a sign that the
leveling feet are not completely leveled.
For more information visit us on www.ANZZI.com or call 1-844-44-ANZZI
One Piece LUCITE™ Acrylic Bathtubs
Installation & General Care
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Universal Tubs HD2953WCALWH Installation guide
-
Universal Tubs HD3053LWA-CH-SP User manual
-
LG LDFN3432T Owner's manual
-
Jacuzzi R6F6634BCXXXXW User manual
-
Jackson / Dalton Dishwasher AJ-44TE User manual
-
Aquatic 7236DMIN Owner's manual
-
LG Electronics LDP7708BD Installation guide
-
Ella HM31182P Installation guide
-
LG SIGNATURE LUDP8997SN Operating instructions
-
Kingston Brass WLKTDE692823C5 Installation guide
