Specifications
DESCRIPTION
• Component construction with various nishes identied by sux
• Pressure balancing cycle valve design with an adjustable temperature limit stop
• 1/2" IPS connections
• Includes valve, showerhead, tub spout, arm and ange
OPERATION
• Lever style handle
• Handle operates counterclockwise through a 270˚arc with o
at 6 o’clock and maximum hot at the 9 o’clock position. Shut o in
clockwise direction
• Adjustable temperature limit stop to control maximum hot water temperature
• Pressure balancing mechanism maintains selected discharge temperature
to ± 2°
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) for models prior to 10/2013
• EP sux models and models after 10/2013, showerheads limited to 2.0 gpm
(7.6 L/min) maximum, and 1.5 gpm (5.7 L/min) minimum at 45 psi
STANDARDS
• Third party certied to ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein
• ADA for lever handle
• Meets WaterSense® criteria for EP sux models and models after 10/2013
• Meets New York City Local Law No. 57 for EP sux models and models
after 10/2013
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
Tin™
Posi-Temp®
Single-Handle Shower
MODEL: 82876 Series
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
5/15
3-1/2"
(90 mm)
6'-6"
(1981 mm)
Nomimal
C
L
Shower
45" (1143 mm)/
48" (1219 mm)
Tub/Shower &
Tub Only
32" (813 mm)
1-3/8"
(35 mm)
2-1/2" Max.
(63 mm)
1/2" (13 mm) Min. CC
5/8" (16 mm) Min. IPS
2" (51 mm) CC
1-7/8" (48 mm) IPS Max. Wall
Face of Stud
Finished Wall Line
Floor Line
3-1/2" (90 mm) Max.
2-1/4" (57mm) Min.
C
L
1-3/8"
(35 mm)
1-1/2" (38mm)
3/6" (typ) (5mm)
Plaster Ground
Floor Line
Plastic
Tub/Shower
Surround
7”
(178mm)
2-1/2”
(63mm)
5-1/2”
(140mm)
2-1/2”
(63mm)
/