Behringer UM2 User manual

UM2
Behringer
Brand
Behringer
Model
UM2
Type
User manual
Quick Start Guide
UMC404HD
Audiophile 4x4, 24-Bit/192 kHz
USB Audio/MIDI Interface with MIDAS Mic Preampli ers
UMC204HD
Audiophile 2x4, 24-Bit/192 kHz
USB Audio/MIDI Interface with MIDAS Mic Preampli ers
UMC202HD
Audiophile 2x2, 24-Bit/192 kHz
USB Audio Interface with MIDAS Mic Preampli ers
UMC22
Audiophile 2x2 USB Audio Interface with
MIDAS Mic Preampli er
UM2
Audiophile 2x2 USB Audio Interface with
XENYX Mic Preampli er
U-PHORIA
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Quick Start Guide 3
2
Terminals marked with this
symbol carry electrical
current of su cient
magnitude to constitute risk of electric
shock. Use only high-quality professional
speaker cables with ¼" TS or twist-locking
plugs pre-installed. Allother installation or
modi cation should be performed only by
quali edpersonnel.
This symbol, wherever it
appears, alertsyou to the
presence of uninsulated
dangerous voltage inside the
enclosure-voltage that may be su cient
to constitute a risk ofshock.
This symbol, wherever it
appears, alertsyou to
important operating and
maintenance instructions in the
accompanying literature. Please read
the manual.
Caution
To reduce the risk of electric
shock, donot remove the
top cover (or the rear section). No user
serviceable parts inside. Refer servicing to
quali ed personnel.
Caution
To reduce the risk of  re or
electric shock, do not expose
this appliance to rain and moisture. The
apparatus shall not be exposed to dripping
or splashing liquids and no objects  lled
with liquids, suchas vases, shall be placed
on the apparatus.
Caution
These service instructions are
for use by quali ed service
personnel only. Toreduce the risk of electric
shock do not perform any servicing other
than that contained in the operation
instructions. Repairs have to be performed
by quali ed servicepersonnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including ampli ers) that
produce heat.
Important Safety
Instructions
9. Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding-type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. Ifthe provided
plug does not  t into your outlet, consult
an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11. Use only attachments/accessories
speci ed by themanufacturer.
12. Use only with
the cart, stand,
tripod, bracket, or
table speci ed by
the manufacturer,
orsold with the apparatus. When a cart
is used, use caution when moving the
cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during
lightning storms or when unused for long
periods of time.
14. Refer all servicing to quali ed service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or
has beendropped.
15. The apparatus shall be connected to
a MAINS socket outlet with a protective
earthing connection.
16. Where the MAINS plug or an
appliance coupler is used as the disconnect
device, the disconnect device shall remain
readily operable.
17. Correct disposal of
this product: This symbol
indicates that this product
must not be disposed
of with household
waste, according to the WEEE Directive
(2012/19/EU) and your national law. This
product should be taken to a collection
center licensed for the recycling of waste
electrical and electronic equipment (EEE).
The mishandling of this type of waste
could have a possible negative impact on
the environment and human health due
to potentially hazardous substances that
are generally associated with EEE. At the
same time, your cooperation in the correct
disposal of this product will contribute to
the e cient use of natural resources. For
more information about where you can
take your waste equipment for recycling,
please contact your local city o ce, or your
household waste collection service.
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Quick Start Guide 5
4
18. Do not install in a con ned space,
such as a book case or similar unit.
19. Do not place naked  ame sources,
such as lighted candles, on the apparatus.
20. Please keep the environmental
aspects of battery disposal in mind.
Batteries must be disposed-of at a battery
collection point.
21. Use this apparatus in tropical and/or
moderate climates.
LEGAL DISCLAIMER
MUSIC Group accepts no liability for
any loss which may be su ered by
any person who relies either wholly
or in part upon any description,
photograph, or statement contained
herein. Technical speci cations,
appearances and other information are
subject to change without notice. All
trademarks are the property of their
respective owners. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound,
TC Electronic, TC Helicon, Behringer,
Bugera and DDA are trademarks or
registered trademarks of MUSIC Group
IP Ltd. © MUSIC Group IP Ltd. 2017
All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and
conditions and additional information
regarding MUSIC Group’s Limited Warranty,
please see complete details online at
music-group.com/warranty.
Las terminales marcadas con
este símbolo transportan
corriente eléctrica de
magnitud su ciente como para constituir
un riesgo de descarga eléctrica. Utilice solo
cables de altavoz profesionales y de alta
calidad con conectores TS de 6,3 mm o de
bayoneta pre jados. Cualquier otra
instalación o modi cación debe ser
realizada únicamente por un
técnico cuali cado.
Instrucciones de
seguridad
Este símbolo, siempre que
aparece, leadvierte de la
presencia de voltaje peligroso
sin aislar dentro de la caja; estevoltaje
puede ser su ciente para constituir un
riesgo dedescarga.
Este símbolo, siempre que
aparece, leadvierte sobre
instrucciones operativas y de
mantenimiento que aparecen en la
documentación adjunta. Por favor,
lea el manual.
Atención
Para reducir el riesgo
de descarga eléctrica,
no quite la tapa (o la parte posterior).
No hay piezas en el interior del equipo
que puedan ser reparadas por el usuario.
Si es necesario, póngase en contacto con
personal cuali cado.
Atención
Para reducir el riesgo de
incendio o descarga eléctrica,
no exponga este aparato a la lluvia,
humedad o alguna otra fuente que pueda
salpicar o derramar algún líquido sobre
el aparato. Nocoloque ningún tipo de
recipiente para líquidos sobre el aparato.
Atención
Las instrucciones de servicio
deben llevarlas a cabo
exclusivamente personal cuali cado.
Para evitar el riesgo de una descarga
eléctrica, no realice reparaciones que no
se encuentren descritas en el manual
de operaciones. Lasreparaciones deben
ser realizadas exclusivamente por
personalcuali cado.
1. Lea las instrucciones.
2. Conserve estas instrucciones.
3. Preste atención a todas
las advertencias.
4. Siga todas las instrucciones.
5. No use este aparato cerca del agua.
6. Limpie este aparato con un paño seco.
7. No bloquee las aberturas de
ventilación. Instale el equipo de acuerdo
con las instrucciones del fabricante.
8. No instale este equipo cerca de
fuentes de calor tales como radiadores,
acumuladores de calor, estufas u otros
aparatos (incluyendo ampli cadores) que
puedan producir calor.
9. No elimine o deshabilite nunca la
conexión a tierra del aparato o del cable
de alimentación de corriente. Unenchufe
polarizado tiene dos polos, uno de los
cuales tiene un contacto más ancho que
el otro. Una clavija con puesta a tierra
dispone de tres contactos: dos polos y
la puesta a tierra. El contacto ancho y el
tercer contacto, respectivamente, son los
que garantizan una mayor seguridad. Si
el enchufe suministrado con el equipo
no concuerda con la toma de corriente,
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2
Quick Start Guide19
18
(EN) Step 1: Hook-Up
(ES) Paso 1: Conexión
(FR) Etape 1 : Connexions
(DE)
Schritt 1: Verkabelung
(PT) Passo 1: Conexões
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Hook-up
Mobile Recording / Mixing
Sistema de grabación / mezclas móvil
Enregistrement/mixage nomade
Mobiles Recording / Mixing
Gravação em aparelho móvel /Mixagem
Home / Project Studio
Estudio casero / de proyectos
Home Studio/installation
Heim-/Projektstudio
Casa / Estúdio de Projeto
HPS3000
XM8500
Laptop
Guitar
B3031AB3031A
MIDI Keyboard
FX2000
Desktop
HPS3000
Guitar
B-2 PRO
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2
Quick Start Guide21
20
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Controls
(10) (11) (13)
(20)(19) (21)
(22) (23) (24)
(15) (16) (17) (18)
(7) (8) (9)(6)(1) (3) (4)
(25)
(14)
(20)(19)
(10) (11) (13) (14) (15) (16) (17) (18)
(23) (24) (21) (25)
(7) (8) (9)(6)(1) (3) (4)
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2
Quick Start Guide23
22
(21)
(13)
(10)
(11)
(19) (20)
(15) (16) (17) (18)
(1) (3) (4) (5) (9)
(11) (13) (15) (16) (17) (18)(10)
(1) (2) (5)
(19) (20) (21)
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Controls
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2
Quick Start Guide25
24
(21) (19) (20)
(10) (13) (18)
(15)(12)(11)
(16) (17)
(5)(1) (2)
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Controls
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2
Quick Start Guide27
26
(15) OUTPUT (UM2 / UMC22 / UMC202HD) /
MAIN OUT (UMC204HD & UMC404HD)
knob adjusts the output level at the
1(L) & 2(R) OUTPUTS (UM2 / UMC22/
UMC202HD) or the L & R MAIN OUT
(UMC204HD & UMC404HD).
(16) POWER LED indicates that the unit is
poweredon.
(17) +48 V LED indicates that +48 V phantom
power isengaged.
(18) output. Connect to headphones for
playback andmixing.
(19) USB type B connector. Connect to a
computer via thisconnector.
(20) +48 V ON/OFF selector engages
+48 V phantom power
(required for professional studio
condensermicrophones).
(21) 1(L) & 2(R) OUTPUTS (UM2 / UMC22
/ UMC202HD) / L & R MAIN OUT
(UMC204HD & UMC404HD) connect to
powered studio monitors for playback
andmixing.
(22) DC IN (UMC404HD) connect to the mains
via the included power adapter.
(23) MIDI IN/OUT (UMC204HD & UMC404HD)
connect to external MIDI controllers and
modules via theseconnectors.
(24) PLAYBACK OUTPUTS A 1 & 2 / B 3 &4
(UMC204HD) / PLAYBACK OUTPUTS A
1/L & 2/R / B 3/L & 4/R (UMC404HD)
connect to external speakers for additional
monitoring options.
(25) INSERTS 1 & 2 (UMC204
HD
) / 1 – 4
(UMC404
HD
) connect to external signal
processing devices via theseconnectors.
(EN) Step 2: Controls
(1) MIC/LINE 1 (UM2 & UMC22) / INPUT 1
& 2 (UMC202HD & UMC204HD) / INPUT
1 – 4 (UMC404HD) combination XLR/
¼" connectors. Connect microphones,
instruments or line level audio sources to
theseconnectors.
(2) INST 2 (UM2 & UMC22) ¼" connector.
Connect instrument and audio sources to
this connector.
(3) LINE / INST (UMC202HD / UMC204HD
/ UMC404HD) selector designates line
level or instrument level input source at
combination XLR/¼"connector(s).
(4) PAD (UMC202HD / UMC204HD /
UMC404HD) selector reduces input level
for connected sources whenengaged.
(5) DIRECT MONITOR (UM2 / UMC22 /
UMC202HD) selector activates direct
monitoring of input signals with zero
latency (no delay) whenengaged.
(6) STEREO/MONO (UMC204HD &
UMC404HD) selector activates mono
monitoring of audio signals connected
to INPUT 1 and INPUT 2 (UMC204HD) or
INPUTS 1 – 4 (UMC404HD) when engaged.
(7) MIX (UMC204HD & UMC404HD) knob
adjusts the level of input signal to playback
1-2 signal at the MAIN OUT and at the
output (ifMONITOR A is selected for the
output).
(8) MONITOR A/B (UMC204HD & UMC404HD)
selector designates output channels
3 & 4 at the output when engaged.
(9) PHONES (UMC202HD / UMC204HD /
UMC404HD) knob adjusts the output level
at the (headphones)output.
(10) SIG LED indicates that an audio signal is
present in the channel.
(11) MIC/LINE GAIN 1 (UM2) / GAIN 1 &2
(UMC22 / UMC202HD /UMC204HD)
GAIN 1 – 4 (UMC404HD) knob adjusts
the input level at MIC/LINE 1 (UM2), MIC/
LINE 1 & INST 2 (UMC22), INPUT 1 & 2
(UMC202HD & UMC204HD), or INPUT 1 – 4
(UMC404HD).
(12) INST GAIN 2 (UM2) knob adjusts the input
level at the INST 2 input.
(13) CLIP LED indicates that the audio
signal in the channel is too loud.
Turn the corresponding GAIN knob
counter-clockwise until the CLIP LED
nolongerilluminates.
(14) MIDI IN/OUT LEDs (UMC204HD &
UMC404HD) indicate MIDI signal activity.
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Controls
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2
Quick Start Guide37
36
(EN) Step 3: Getting started
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Getting start ed
Windows operating system:
Please visit www.behringer.com
and downloadthe latest USB driver
for your U-Phoria interface. Unzip the  le,
double-click the setup.exe and follow the
on-screen instructions.
Mac OS X operating system: No drivers
needed, your U-Phoria interface operates
class-compliant.
Connect to the mains
via the provided power
adapter(UMC404HD).
Connect to a computer via the
provided USB cable. Designate your
U-Phoria device as your audio
(UM2 / UMC22 / UMC202HD) or audio/MIDI
(UMC204HD & UMC404HD) interface in your
DAWsoftware.
Connect a pair of studio headphones
to the connector to monitor
input levels and playback from your
audio software. Use the OUTPUT knob (UM2 &
UMC22) or PHONES knob (UMC202HD /
UMC204HD / UMC404HD) to adjust the
headphone volume. Engage the DIRECT
MONITOR button (UM2 / UMC22 / UMC202HD)
or adjust the MIX knob (UMC204HD &
UMC404HD) to achieve zero latency monitoring
of your inputsignals.
Connect instruments and audio
sources to MIC/LINE 1 and INST 2
(UM2 & UMC22), INPUT 1 and INPUT
2 (UMC202HD & UMC204HD), or INPUT 1 – 4
(UMC404HD). Use the MIC/LINE GAIN 1 and INST
GAIN 2 (UM2), GAIN 1 and GAIN 2 knobs
(UMC22/ UMC202 / UMC204HD), or GAIN 1 – 4
(UMC404HD) knobs to adjust the input level of
the connected audio sources. Engage the +48 V
phantom power switch on the rear panel if you
are recording with condenser microphones.
Connect a MIDI keyboard, controller,
or other MIDI device via the MIDI
ports on the rear panel
(UMC204HD & UMC404HD).
Connect a pair of studio monitors
to the 1(L) & 2(R) OUTPUTS
(UM2/UMC22 / UMC202HD) or
L & R MAIN OUTS (UMC204HD & UMC404HD) for
playback and mixing. Use the OUTPUT (UM2 /
UMC22 / UMC202HD) or MAIN OUT (UMC204HD
& UMC404HD) knob to adjust the volume level
at the OUTPUTS or MAIN OUT.
(ES) Paso 3: Puesta en marcha
Sistemas Windows: Visite la web
www.behringer.com y descárguese
la última versión del driver USB para
su interface U-Phoria. Descomprima el  chero,
haga doble clic en el archivo setup.exe y siga las
instrucciones queaparecerán.
Sistemas Mac OS X: No es necesario ningún
driver, por lo que su interface U-Phoria
funcionará de forma directa.
Conecte la unidad a la corriente
pormedio del adaptador
incluido(UMC404HD).
Conecte esta unidad a un ordenador
por medio del cable USB incluido.
Designe su dispositivo U-Phoria
como su interface audio (UM2 / UMC22 /
UMC202HD) o audio/MIDI (UMC204HD &
UMC404HD) en su programa DAW.
Conecte unos auriculares de estudio
a la toma para monitorizar los
niveles de entrada y la reproducción
de su software audio. Use el mando OUTPUT
(UM2 & UMC22) o el mando PHONES
(UMC202HD / UMC204HD / UMC404HD) para
ajustar el volumen de los mismos. Active el
botón DIRECT MONITOR (UM2 / UMC22 /
UMC202HD) o ajuste el mando MIX (UMC204HD
& UMC404HD) para conseguir una
monitorización con latencia cero de sus señales
de entrada.
Conecte instrumentos y fuentes
audio a las tomas MIC/LINE 1 y INST
2 (UM2 & UMC22), INPUT 1 y INPUT
2 (UMC202HD & UMC204HD) o INPUT 1 – 4
(UMC404HD). Use los mandos MIC/LINE GAIN 1 y
INST GAIN 2 (UM2), GAIN 1 y GAIN 2 (UMC22 /
UMC202HD / UMC204HD), o GAIN 1 – 4
(UMC404HD) para ajustar el nivel de entada de
las fuentes audio conectadas. Active el
interruptor de alimentación fantasma de +48 V
del panel trasero si va a grabar con micrófonos
decondensador.
Conecte un teclado, controlador u
otrodispositivo MIDI a través de
lospuertos MIDI del panel trasero
(UMC204HD & UMC404HD).
Conecte un par de monitores de
estudio a las salidas 1(L) & 2(R)
OUTPUTS (UM2 / UMC22 /
UMC202HD) o L & R MAIN OUTS (UMC204HD &
UMC404HD) para la reproducción y mezcla del
sonido. Use el mando OUTPUT (UM2 / UMC22 /
UMC202HD) o MAIN OUT (UMC204HD &
UMC404HD) para ajustar el nivel de volumen en
las salidas OUTPUTS o MAIN OUT.
Page is loading ...
Page is loading ...
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Quick Start Guide 43
42
Speci cations
Model UMC404HD UMC204HD UMC202HD
Input
Preamp 4 x MIDAS design 2 x MIDAS design
Type
4 x XLR/TRS combo connector
(Mic/Line/Instrument)
2 x XLR/TRS combo connector
(Mic/Line/Instrument)
Input level attenuation 4 x Pad switch 2 x Pad switch
Frequency response 10 Hz – 50 kHz (0 / -3 dB)
Impedance Mic in: 3 kΩ / Instrument in: 1 MΩ
Max. input level Mic: -4 dBu / Line: +20 dBu / Instrument: -3 dBu
Phantom power +48 V, switchable
Output
Type
1 x ¼" stereo (Phones),
2 x ¼" TRS (Main Line Out),
2 x XLR (Main Line Out),
4 x ¼" TRS (Playback Line Out),
4 x RCA (Playback Line Out)
1 x ¼" stereo (Phones),
2 x ¼" TRS (Main Line Out),
4 x RCA (Playback Line Out)
1 x ¼" stereo (Phones),
2 x ¼" TRS (Line Out)
Frequency response 10 Hz – 43 kHz (0 / + 0.3 dB)
Max. output level +3 dBu
Model UMC404HD UMC204HD UMC202HD
System Data
Dynamic range 100 dB, A-weighted 110 dB, A-weighted
Frequency response 10 Hz – 43 kHz (0 / + 0.3 dB)
Inserts
Type 4 x ¼" TRS 2 x ¼" TRS n/a
Impedance 100 Ω Send / 10 kΩ Return n/a
Max. input level +3 dBu n/a
MIDI I/O
Type 5-pin DIN; 1 in, 1 out n/a
Monitoring
Direct monitor control Mix Balance control (input <> playback) Direct Monitor switch
Headphones DJ cueing Monitor A/B switch (out 1-2 / 3-4 select) n/a
Security Lock
Kensington security lock Yes
Digital Processing
Supported sample rates 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
Computer Bus Connectivity
Type USB 2.0, type B
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Quick Start Guide 45
44
Model UMC404HD UMC204HD UMC202HD
Software Support
Operating systems Mac OS X*, Windows XP* or higher*
Drivers
Mac*: No driver required / CoreAudio supported
Windows*: Available as download from behringer.com
Power
Power consumption Max. 2.5 W
Power supply
USB connector (bus-powered from
computer) and adapter
USB connector
(bus-powered from computer)
Mains voltage 100-240 V~,50/60 Hz n/a
Dimensions
Dimensions (H x W x D)
45.81 x 292 x 130 mm
(1.78 x 11.5 x 5.1")
46.45 x 185 x 130 mm
(1.8 x 7.3 x 5.1")
46.45 x 170 x 125 mm
(1.8 x 6.7 x 4.9")
Weight 1.2 kg (2.7 lbs) 0.6 kg (1.4 lbs) 0.5 kg (1.2 lbs)
Speci cations
Model UMC22 UM2
Input
Preamp 1 x MIDAS design 1 x XENYX
Type 1 x XLR/TRS combo connector (Mic/Line), 1 x ¼" TRS (Instrument)
Input level attenuation n/a
Frequency response 10 Hz – 30 kHz (0 / - 0.5 dB)
Impedance Mic in: 3 kΩ / Instrument in: 1 MΩ
Max. input level Mic: +2 dBu / Line: +22 dBu / Instrument: +2 dBu
Phantom power +48 V, switchable
Output
Type
1 x ¼" stereo (Phones),
2 x ¼" TRS (Line Out)
1 x ¼" stereo (Phones),
2 x RCA (Line Out)
Frequency response 10 Hz – 30 kHz (0 / -0.5 dB)
Max. output level 0 dBu
System Data
Dynamic range 100 dB, A-weighted
Frequency response 10 Hz – 30 kHz (0 / - 3 dB)
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Quick Start Guide 47
46
Model UMC22 UM2
Inserts
Type n/a
Impedance n/a
Max. input level n/a
MIDI I/O
Type n/a
Monitoring
Direct monitor control Direct Monitor switch
Headphones DJ cueing n/a
Security Lock
Kensington security lock Yes
Digital Processing
Supported sample rates 32 / 44.1 / 48 kHz
Computer Bus Connectivity
Type USB 1.1, type B
Software Support
Operating systems Mac OS X*, Windows XP* or higher*
Drivers
Mac*: No driver required / CoreAudio supported
Windows*: Available as download from behringer.com
Speci cations
Model UMC22 UM2
Power
Power consumption Max. 2.5 W
Power supply USB connector (bus-powered from computer)
Mains voltage n/a
Dimensions
Dimensions (H x W x D)
46.45 x 163 x 125 mm
(1.8 x 6.4 x 4.9")
46.45 x 128 x 118 mm
(1.8 x 5.1 x 4.7")
Weight 0.5 kg (1.0 lbs) 0.3 kg (0.6 lbs)
*Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries. Windows and Windows XP are registered trademarks of
Microsoft Corporation in the United States and other countries.
Quick Start Guide 49
Other important information
1. Register online. Please register your new
MUSIC Group equipment right after you purchase it by
visiting behringer. com. Registering your purchase using
our simple online form helps us to process your repair
claims more quickly and e ciently. Also, read the terms
and conditions of our warranty, ifapplicable.
2. Malfunction. Should your MUSICGroup
Authorized Reseller not be located in your vicinity, you
may contact the MUSIC Group Authorized Ful ller for
your country listed under “Support” at behringer. com.
Shouldyour country not be listed, please check if your
problem can be dealt with by our “OnlineSupport”
which may also be found under “Support” at
behringer. com. Alternatively, please submit an online
warranty claim at behringer. com BEFORE returning
theproduct.
1. Registro online. Le recomendamos que
registre su nuevo aparato MUSIC Group justo después de
su compra accediendo a la página web behringer. com.
Elregistro de su compra a través de nuestro sencillo
sistema online nos ayudará a resolver cualquier
incidencia que se presente a la mayor brevedad posible.
Además,aproveche para leer los términos y condiciones
de nuestra garantía, si es aplicable en sucaso.
2. Averías. En el caso de que no exista un
distribuidor MUSIC Group en las inmediaciones, puede
ponerse en contacto con el distribuidor MUSIC Group de
su país, queencontrará dentro del apartado “Support”
de nuestra página web behringer. com. En caso de que
su país no aparezca en ese listado, acceda a la sección
“Online Support” (quetambiénencontrará dentro del
apartado “Support” de nuestra páginaweb) y compruebe
si su problema aparece descrito y solucionado allí. De
forma alternativa, envíenos a través de la página web una
solicitud online de soporte en periodo de garantía ANTES
de devolvernos el aparato.
1. Enregistrez-vous en ligne. Prenez le
temps d’enregistrer votre produit MUSIC Group aussi
vite que possible sur le site Internet behringer. com.
Le fait d’enregistrer le produit en ligne nous permet
de gérer les réparations plus rapidement et plus
e cacement. Prenezégalement le temps de lire les
termes et conditions de notre garantie.
2. Dysfonctionnement. Si vous n’avez
pas de revendeur MUSIC Group près de chez vous,
contactez le distributeur MUSIC Group de votre pays:
consultez la liste des distributeurs de votre pays dans la
page “Support” de notre site Internet behringer. com.
Si votre pays n’est pas dans la liste, essayez de résoudre
votre problème avec notre “aideen ligne” que vous
trouverez également dans la section “Support” du site
behringer. com. Vous pouvez également nous faire
parvenir directement votre demande de réparation sous
garantie par Internet sur le site behringer. com AVANT
de nous renvoyer le produit.
Important information Aspectos importantes Informations importantes
1. Online registrieren. Bitte registrieren
Sie Ihr neues MUSIC Group-Gerät direkt nach dem Kauf
auf der Website behringer. com. Wenn Sie Ihren Kauf
mit unserem einfachen Online-Formular registrieren,
können wir Ihre Reparaturansprüche schneller und
e zienter bearbeiten. Lesen Sie bitte auch unsere
Garantiebedingungen, fallszutre end.
2. Funktionsfehler. Sollte sich kein
MUSICGroup Händler in Ihrer Nähe be nden, können
Sie den MUSICGroup Vertrieb Ihres Landes kontaktieren,
derauf behringer. com unter „Support“ aufgeführt ist.
Sollte Ihr Land nicht aufgelistet sein, prüfen Sie bitte,
ob Ihr Problem von unserem „Online Support“ gelöst
werden kann, den Sie ebenfalls auf behringer. com unter
„Support“  nden. Alternativ reichen Sie bitte Ihren
Garantieanspruch online auf behringer. com ein, BEVOR
Sie das Produktzurücksenden.
1. Registre-se online. Por favor, registre seu
novo equipamento MUSIC Group logo após a compra
visitando o site behringer. com Registrar sua compra
usando nosso simples formulário online nos ajuda a
processar seus pedidos de reparos com maior rapidez e
e ciência. Além disso, leia nossos termos e condições de
garantia, caso seja necessário.
2. Funcionamento Defeituoso.
Casoseufornecedor MUSIC Group não esteja localizado
nas proximidades, você pode contatar um distribuidor
MUSIC Group para o seu país listado abaixo de “Suporte”
embehringer. com. Se seu país não estiver na lista,
favorchecar se seu problema pode ser resolvido
com o nosso “Suporte Online” que também pode
ser achado abaixo de “Suporte”em behringer. com.
Alternativamente, favor enviar uma solicitação de
garantia online em behringer. com ANTES da devolução
do produto.
Weitere wichtige
Informationen
Outras Informações
Importantes
48
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2
U-PHORIA UMC404HD/UMC204HD/UMC202HD/UMC22/UM2 Quick Start Guide 51
50
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
Responsible Party Name: MUSIC Group Services NV Inc.
Address: 5270 Procyon Street
Las Vegas, NV 89118
USA
Phone Number.: +1 702 800 8290
U-PHORIA UMC404HD/UMC204HD/UMC202HD/
UMC22/UM2
complies with the FCC rules as mentioned in the followingparagraph:
This equipment has been tested and found to comply with the limits
for a ClassB digital device, pursuant to part 15 of the FCC Rules.
Theselimits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, thereis no
guarantee that interference will not occur in a particular installation.
Ifthis equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the followingmeasures:
•
• Reorient or relocate the receiving antenna.
•
• Increase the separation between the equipment and receiver.
•
• Connect the equipment into an outlet on a circuit di erent from
that to which the receiver is connected.
•
• Consult the dealer or an experienced radio/TV technician forhelp.
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
includinginterference that may cause undesired operation.
Important information:
Changes or modi cations to the equipment not expressly approved by
MUSICGroup can void the user’s authority to use the equipment.
U-PHORIA UMC404HD/UMC204HD/
UMC202HD/UMC22/UM2
Dedicate Your Life to MUSIC
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27

Behringer UM2 User manual

UM2
Behringer
Brand
Behringer
Model
UM2
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents