Stone & Beam ALT0316035 User manual

ASSEMBLY INSTRUCTION

ASIN NO. :

B073P2N985

In order to ensure safety and maximize the lifetime of the lamp, please

make sure to read the following instructions thoroughly before assembly.

Assembly Instructions:

Note: Electrical wire is connected continuously through the poles. Please DO NOT pull wire

during unpacking. Bad connections may result.

1. Unpack all parts from carton carefully.

2. Place the LED Bulb (E) into the socket.

3. Insert the Harp (C) into the saddle.

4. Place the Shade (B) onto the Harp (C).

5. Attach the Finial (A) onto the Harp (C) and tighten to secure the Shade (B).

6. Assembly is completed.

WAR N I N G:

1. Use Type A Bulb of LED 10W maximum (Bulb included)

2. Do not use polishes or cleaners on your lamp.

Simply wipe clean with a soft cloth.

Made in China