JONATHAN Y JYL9031B is a lighting fixture that is designed to be installed on a ceiling. It comes with a mounting bracket, machine screws, a ground screw, a wire connector, a canopy, screw balls, a nipple, glass, a round cover, and a finial. The fixture can accommodate two light bulbs with a maximum wattage of 40 watts each. It is also compatible with CFL bulbs with a maximum wattage of 13 watts and LED bulbs with a maximum wattage of 9 watts. The fixture comes with two 4-watt LED bulbs.
To install the fixture, you will need to first turn off the main electrical supply from the main fuse box/circuit breaker. Then, you will need to inspect the item carefully to make sure that there is no damage or obvious defect. If there is any damage, do not install the item.
JONATHAN Y JYL9031B is a lighting fixture that is designed to be installed on a ceiling. It comes with a mounting bracket, machine screws, a ground screw, a wire connector, a canopy, screw balls, a nipple, glass, a round cover, and a finial. The fixture can accommodate two light bulbs with a maximum wattage of 40 watts each. It is also compatible with CFL bulbs with a maximum wattage of 13 watts and LED bulbs with a maximum wattage of 9 watts. The fixture comes with two 4-watt LED bulbs.
To install the fixture, you will need to first turn off the main electrical supply from the main fuse box/circuit breaker. Then, you will need to inspect the item carefully to make sure that there is no damage or obvious defect. If there is any damage, do not install the item.
JONATHAN Y JYL9031B is a lighting fixture that is designed to be installed on a ceiling. It comes with a mounting bracket, machine screws, a ground screw, a wire connector, a canopy, screw balls, a nipple, glass, a round cover, and a finial. The fixture can accommodate two light bulbs with a maximum wattage of 40 watts each. It is also compatible with CFL bulbs with a maximum wattage of 13 watts and LED bulbs with a maximum wattage of 9 watts. The fixture comes with two 4-watt LED bulbs.
To install the fixture, you will need to first turn off the main electrical supply from the main fuse box/circuit breaker. Then, you will need to inspect the item carefully to make sure that there is no damage or obvious defect. If there is any damage, do not install the item.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI