Kingston Brass HKB5615PX is a twin handle lavatory faucet with or without pop-up and comes with a 10-year limited warranty.

This installation guide provides instructions on how to install and replace parts for the Kingston Brass HKB5615PX twin handle lavatory faucet. The guide includes the following steps:

1. Shut off hot and cold water supply under the sink.
2. Remove the old faucet.
3. Insert the inlet shanks through the sink holes, and press down.
4. Apply Teflon tape to inlet shanks and connect supply lines.
5. Install the flange body up through the drain opening.
6. Place the pivot rod into the pivot rod opening and tighten firmly.