BenQ FP71W is a 17" LCD monitor with a built-in 3-port USB 2.0 hub, providing easy access for your USB devices. It features a tilt function for optimal viewing angle adjustment and supports both D-Sub and DVI-D signal inputs. The BenQ FP71W is perfect for both home and office use, offering a comfortable and productive computing experience.
BenQ FP71W is a 17" LCD monitor with a built-in 3-port USB 2.0 hub, providing easy access for your USB devices. It features a tilt function for optimal viewing angle adjustment and supports both D-Sub and DVI-D signal inputs. The BenQ FP71W is perfect for both home and office use, offering a comfortable and productive computing experience.
FP71W
LCD Color Monitor
17.0" LCD Panel Size
User’s Manual
Welcome
2
Copyright
Copyright © 2005 by BenQ Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness
for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication
and to make changes from time to time in the contents hereof without obligation of BenQ
Corporation to notify any person of such revision or changes.
Please follow these safety instructions for best
performance, and long life for your monitor
Power Safety
• The AC plug isolates this equipment from the AC supply.
• The power supply cord serves as a power disconnect device for pluggable equipment. The socket
outlet should be installed near the equipment and be easily accessible.
• This product should be operated from the type of power indicated on the marked label. If you are
not sure of the type of power available, consult your dealer or local power company.
Care And Cleaning
• Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass
cleaners.
• Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked
or covered. Your monitor should never be placed near or over a radiator or heat source, or in a
built-in installation unless proper ventilation is provided.
• Never push objects or spill liquid of any kind into this product.
Servicing
• Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltages or other risks. If any of the above mentioned misuse or other accident such as
dropping or mishandling occurs, contact qualified service personnel for servicing.
i
ii
iii
Table of Contents 3
Table of Contents
Getting started ...................................................................................................................... 5
Getting to know your Monitor ............................................................................................7
Front View ...................................................................................................................7
Back View (1) ...............................................................................................................7
Back View (2): Locations of plugs & sockets ..............................................................8
Side View ......................................................................................................................8
How to install your monitor hardware ............................................................................... 9
Adjusting the viewing angle ......................................................................................12
Getting the most from your BenQ monitor ...................................................................... 13
How to install the monitor on a new computer ......................................................14
How to upgrade the monitor on an existing computer ..........................................15
How to install on Windows XP systems ...................................................................16
How to install on Windows 2000, ME, & 98 systems ..............................................17
How to complete the Windows Upgrade Device Driver Wizard ...........................18
How to adjust the screen resolution .................................................................................. 20
How to adjust the screen refresh rate ................................................................................ 21
How to set the picture optimization .................................................................................. 22
How to adjust your Monitor .............................................................................................. 23
A Look at the Control Panel .....................................................................................23
Hot Key Mode ...........................................................................................................24
Troubleshooting ................................................................................................................. 33
Frequently Asked Questions (FAQ) .........................................................................33
Need More Help? .......................................................................................................34
Supported operating modes ............................................................................................... 35
Specifications ...................................................................................................................... 36
i
Table of Contents4
5 Getting started
Getting started
When unpacking please check you have the following items. If they are missing or are damaged,
please immediately contact the dealer at which you purchased the goods.
1
BenQ LCD Monitor
Quick Start Guide
CD-ROM Disk
Power Cord
Power Adapter
Signal Cable: D-Sub
6 Getting started
Signal Cable: DVI-D
USB Cable
Audio Cable (Optional)
Speaker Unit: SRS (optional)
Web Camera Unit (optional)
7 Getting to know your Monitor
Getting to know your Monitor
Front View
Back View (1)
2
8 Getting to know your Monitor
Back View (2): Locations of plugs & sockets
1. Power AC Input Jack
2. Audio Connector
3. Composite Video Input
4. S-Video Input
5. DVI-D Connector
6. D-Sub Connector
7. USB Connectors
Side View
1. “Power”
2. “Enter” key
3.
t (Up) key
4. u (Down) key
5. “Exit” key
6. “Mode” key
7. “Input” key
8. “iKey”
9 How to install your monitor hardware
How to install your monitor hardware
Make sure that the computer and monitor's power are both turned off. Please go along with the
following steps to install your LCD monitor.
3
1. Unpack the monitor and place it on a stable surface.
2. Press the locking tab of the cable cover (as shown) to
release the cover.
3. Connect the signal cable (D-Sub or DVI-D) to the
monitor as shown.
10 How to install your monitor hardware
4. Connect the other end of the signal cable to your
computer as shown.
5. Connect the USB cable from your monitor (as
shown) to your computer.
6. Connect the power adaptor plug to your monitor as
shown.
To disconnect the power, always pull from the plug,
not the cord
.
11 How to install your monitor hardware
7. Route the cables in order then replace the cable cover
as shown.
8. Connect the Power Cord to the power adaptor then
plug the other end into a nearby wall socket. (Use
only power supplies listed in the user’s manual)
9. Press the Power button on the side panel of the
monitor. The power indicator will light up.
Note: The USB port on the top panel of your monitor is specifically designed for the attachment of
your WebCam.
12 How to install your monitor hardware
Adjusting the viewing angle
Your LCD monitor is designed with a tilt feature that allows you to achieve your optimal viewing
angle.
13 Getting the most from your BenQ monitor
Getting the most from your BenQ monitor
Monitors and USB hubs
Your BenQ FP783 LCD Monitor is a modern state-of-the-art device. It not only utilizes the latest
LCD display technology currently available – it contains a built-in 3 port USB 2.0 hub. Using only
one USB 2.0 port on your computer (freeing the others up for other uses), the built-in hub
provides close, handy, easy-to-use access for your USB devices.
You could use the USB hub to plug-in your USB keyboard, USB mouse, and USB web camera all
at the same time if you wish. Or if you connect your keyboard and mouse directly to your
computer, you could use the USB ports on the monitor for connection to your digital camera,
digital video camera, USB reader, USB printer, USB memory stick, or any other USB device.
What do I have to do?
All you have to do, is connect the monitor cables as instructed in How to install your monitor
hardware of this User’s Manual, turn the computer and monitor on, then you’re ready to
Plug-and-Play with USB, Windows, and your BenQ LCD Monitor’s USB hub.
Windows 2000 and later comes with integrated USB support. It will automatically detect and
identify your USB devices, and install the necessary drivers for them to work. If your USB device
was accompanied by the manufacturer’s driver or custom software for the device, you need only
point Windows in the direction of that driver, and Windows will install it for you.
How do I gain the most benefit from my new monitor?
To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install
the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor
CD-ROM.
The circumstances under which you connect and install your BenQ LCD Monitor will determine
which process you need to follow to successfully install the BenQ LCD Monitor driver software.
These circumstances relate to which version of Microsoft Windows you are using, and whether
you are connecting the monitor and installing the software onto a new computer (without
existing monitor driver software), or whether you are upgrading an existing installation (which
already has existing monitor driver software) with a newer monitor.
In either case however, the very next time you turn on your computer (after connecting the
monitor to your computer), Windows will automatically recognise the new (or different)
hardware, and will launch its Found New Hardware wizard.
Follow the wizard instructions until it asks you to select a monitor model. At that point, click the
Have Disk button, insert the BenQ LCD Monitor CD-ROM and select the appropriate monitor
model. Further details and step-by-step instructions for both an automatic (new) or upgrade
(existing) installation follow. See:
• How to install the monitor on a new computer.
• How to upgrade the monitor on an existing computer
If you require a User Name and Password to login to your Windows computer, you must be
logged on as an Administrator or as a member of the Administrators group in order to install
the monitor driver software. Furthermore, if your computer is connected to a network which
has security access requirements, network policy settings may prevent you from installing
software on your computer.
4
14 Getting the most from your BenQ monitor
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver
software on a new computer which has never had a monitor driver installed before. This
instruction is only suitable for a computer which has never been used before, and for which the
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another
monitor connected to it (and has monitor driver software installed), you should not be
following these instructions. You should instead be following the instructions for How to
upgrade the monitor on an existing computer.
1. Follow the instructions in How to install your monitor hardware.
When Windows (2000 or later) starts, it will automatically detect the new monitor and launch the
Found New Hardware Wizard. Follow the prompts until it displays the option to Install Hardware
Device drivers.
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check Search for a suitable driver for my device option, and click Next.
4. Check the option for CD-ROM drives (uncheck all others) and click Next.
5. Look to confirm that the wizard has selected the correct name of your monitor as "BenQ
FP71W" and click Next.
6. Click Finish.
Windows will continue installing other devices it finds. If you connected the USB 2.0 hub cable to a
suitable USB 2.0 port on the computer, Windows will automatically detect it and install the
appropriate drivers for it. You need not do anything more to get the hub to work for you.
7. Restart the computer.
15 Getting the most from your BenQ monitor
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver software
on your Microsoft Windows computer. It is currrently tested as compatible (and recommended
only) for Windows 98, Windows ME, Windows 2000, and Windows XP Operating System (OS).
The BenQ LCD Monitor driver for your model may well function perfectly with other versions
of Windows, however, as at the time of writing, BenQ has done no testing of this driver on
other versions of Windows and cannot guarantee its operation on those systems.
Installing monitor driver software involves selecting an appropriate information file (.inf) on the
BenQ LCD Monitor CD-ROM for the particular model monitor you have connected, and letting
Windows install the corresponding driver files from the CD. You need only steer it in the right
direction. Windows has an Upgrade Device Driver Wizard to automate the task and guide you
through the file selection and installation process.
See:
• How to install on Windows XP systems.
• How to install on Windows 2000, ME, & 98 systems.
16 Getting the most from your BenQ monitor
How to install on Windows XP systems
1. Open Display Properties.
The quickest shortcut to Display Properties is through the Windows desktop.
Right-click the desktop and select Properties from the popup menu.
Alternatively, the Windows menu to Display Properties is located in Control Panel.
In Windows XP version, Control Panel is located directly under the main Start menu item.
The menu options displayed will depend upon which type of view is selected for your system.
• Under the Classic view, click Start | Control Panel | Display.
• Under the Category view, click Start | Control Panel | Appearance and Themes | Change the
screen resolution.
The Display Properties window will display.
2. Click the Settings tab and the Advanced button.
The Advanced Display Properties window will display.
3. Click the Monitor tab and select the ‘Plug and Play Monitor’ from the list.
If there is only one monitor in the list, it will already be selected for you.
4. Click the Properties button.
The Monitor Properties window will display.
If the driver provider is listed as BenQ, and the model matches that of your new monitor, the proper
drivers are already installed, and you need do nothing further. Cancel out of these property windows.
However, if BenQ is not listed as the manufacturer, or the correct model is not currently shown, you
will need to continue with these instructions.
5. Click the Driver tab and the Update Driver button.
The Hardware Update Wizard will display. Follow the wizard instructions noting the steps below:
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer you attached the
monitor to.
7. Check the option ‘Install from a list or specific location’ and click Next.
8. Check the option ‘Search for the best driver in these locations’ and also
check ‘Search removable media’, then click Next.
Please wait while the wizard searches for drives and the BenQ LCD Monitor CD inserted in step 6.
When complete, the wizard should have found and selected the BenQ driver on the CD appropriate to
your monitor model, in this case ‘BenQ FP71W’ in the location ‘d:\driver\FP71W.inf’ or similar.
The drive letter for your CD drive may differ from the example above depending upon your
system – it may be ‘D:’ or ‘E:’ or ‘F:’ etc.
9. Select (single-click) the file named ‘BenQ FP71W’ on the CD, and click the Next button.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Finish.
This will close the wizard and return you to the Monitor Properties window, now renamed BenQ
FP71W Properties.
11. Click Close, OK, and OK.
This will close the Display Properties windows. You do not need to restart Windows XP, as the BenQ
LCD monitor drivers will operate immediately with no further action required by you.
17 Getting the most from your BenQ monitor
How to install on Windows 2000, ME, & 98 systems
You do not need to follow this instruction if you are installing onto a computer which has a
Windows XP (or later) version system. In that case, see the instructions at How to install on
Windows XP systems.
1. Open Display Properties.
The quickest shortcut to Display Properties is through the Windows desktop.
Right-click the desktop and select Properties from the popup menu.
Alternatively, the Windows menu to Display Properties is located in Control Panel.
In Windows 2000, ME, & 98 versions, Control Panel is located under the Settings menu item.
Click Start | Settings | Control Panel | Display.
The Display Properties window will display.
2. Click the Settings tab and the Advanced button.
The Advanced Display Properties window will display.
3. In Windows 2000, click the Monitor tab and the Properties button.
The Monitor Properties window will display.
Alternatively, on Windows ME or 98, click the Monitor tab and the Change button.
This will jump you directly to the Upgrade Device Driver Wizard, skipping the next step.
4. In Windows 2000, click the Driver tab and the Update Driver button.
The Upgrade Device Driver Wizard will display.
See How to complete the Windows Upgrade Device Driver Wizard.
18 Getting the most from your BenQ monitor
How to complete the Windows Upgrade Device Driver Wizard
1. Load the BenQ LCD Monitor CD-ROM which came with your monitor.
Insert the CD-ROM into a CD drive on the computer you attached the monitor to.
The autorun User’s Guide language selection page will display in your web browser.
You can select a language and view the online version of this manual from the next window.
You could then print it out for reference if you wish to work off-line. When you’re ready, Cancel the
browser as it is not required for the Windows Upgrade Device Driver Wizard.
2. Launch the Windows Upgrade Device Driver Wizard and click Next.
For instructions, see How to install on Windows 2000, ME, & 98 systems.
3. Check the option ‘Display a list of known drivers ...’ and click Next.
4. Click the Have Disk button.
The Install From Disk window will display.
5. Click the Browse button and navigate to the BenQ LCD Monitor CD-ROM.
This is the CD you loaded in step 1 above. The CD Drive will have a Windows designated drive letter
(like D: or E: or F:). Select the drive letter corresponding to the drive you put the CD into.
6. Double-click the folder labelled ‘Driver’.
The contents of the ‘Driver’ folder will display.
7. Click the Open button.
This will return you to the Install from Disk window, and it will have entered the address to the BenQ
LCD Monitor CD ‘Driver’ folder into the field titled ‘Copy manufacturer’s files from:’.
The field will contain something like "D:\Driver", or "E:\Driver", or "F:\Driver".
8. Click the OK button.
This will return you to the Upgrade Device Driver Wizard.
9. Select (single-click) the file named BenQ FP71W, and click the Next button.
10. Click Next.
This will copy the appropriate monitor driver files to your computer.
11. Click Finish.
On Windows 2000, this will close the wizard and return you to the Monitor Properties window, now
renamed ‘BenQ FP71W Properties’.
Alternatively, on Windows ME and 98, this will return you to the Advanced Display Properties
window, skipping the next step.
Should you wish to do so, this is where you can change the screen refresh rate and other monitor
properties to suit your needs. See How to adjust the screen refresh rate for details.
12. In Windows 2000, click Close.
This will close the BenQ FP71W Properties window and return you to the Advanced Display
Properties window.
Should you wish to do so, this is where you can change the screen refresh rate and other monitor
properties to suit your needs. See How to adjust the screen refresh rate for details.
13. In Windows 2000, click OK, or in Windows 98 or ME, click Close.
This will close the Advanced Display Properties window, and return you to the Display Properties
window.
19 Getting the most from your BenQ monitor
Should you wish to do so, this is where you can change the screen resolution (area and color).
See How to adjust the screen resolution for details.
14. Click OK.
This will close the Display Properties window, and if you made any changes to the screen resolution,
Windows 2000 will prompt you for confirmation to effect the changes, and further confirmation to
accept the changes. Click OK and Ye s respectively.
Alternatively, Windows ME or 98 will ask you if want to make the changes and reboot or not reboot.
You should select the reboot option as this causes Windows to load the new drivers when it next
restarts.
20 How to adjust the screen resolution
How to adjust the screen resolution
Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always
fixed. The best possible picture for your FP71W is achieved with a resolution of 1280x768. This is
called “Native Resolution” or maximal resolution – that is, the clearest picture. Lower resolutions
are displayed on a full screen through an interpolation circuit. However flaws do occur with the
interpolated resolution.
To take full advantage of LCD technology you should select the native resolution setting
of 1280x768.
1. Open Display Properties and select the Settings tab.
You c a n o p en Display Properties by right-clicking on the Windows desktop and selecting Properties
from the pop-up menu.
2. Use the slider in the ‘Screen area’ section to adjust the screen resolution.
Select the recommended resolution of 1280x768 then click Apply.
If you select some other resolution, be aware that this other resolution is interpolated and
may not accurately display the screen image as well as it could do at the native resolution
setting.
3. Click OK then Ye s .
4. Close the Display Properties window.
1
1
1
5
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
BenQ FP71W is a 17" LCD monitor with a built-in 3-port USB 2.0 hub, providing easy access for your USB devices. It features a tilt function for optimal viewing angle adjustment and supports both D-Sub and DVI-D signal inputs. The BenQ FP71W is perfect for both home and office use, offering a comfortable and productive computing experience.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
