Jameson SB-16TE Installation guide

Jameson
Brand
Jameson
Model
SB-16TE
Type
Installation guide
800.346.1956 803.222.6400
WWW.JAMESONLLC.COM
POLE SAWS
Remove wing nut and lock washer. Place
saw blade over bolt and mounting pin.
Replace lock washer
and wing nut, tighten.
Mounting
Pin
Wing Nut
Lock Washer
Snap pole saw into
pole’s ferrule.
Attach Saw Blade to Pole Saw Head
PS-3FP
With Mounting Pin
Wing Nut
Bolt
Carriage
Bolt
Wing Nut
Bolt
Remove wing nut, lock washer and car-
riage bolt nut. Place saw blade over bolt
and carriage bolt. Replace washer, wing
nut and carriage bolt nut.
PS-3F / PS-3
With Carriage Bolt
PS-3FP
Center Blade Mount with
Mounting Pin
Fits Saw Blades: SB-1C, SB-2,
SB-1T, SB-13TE, SB-16TE, SB-
16TE-W, SB-13TE-H
PS-3F
Center Blade Mount with
Carriage Bolt
Fits Saw Blades: SB-1C,
SB-13TE, SB-16TE, SB-16TE-
W, SB-13TE-H
PS-3
Offset Blade Mount with
Carriage Bolt
Fits: SB-2 and SB-4 Blades
Adapters Allow Quick and Easy Replacement of
Pruner Head or Pole Saw
Care For Saw Blades
Wipe down after use to remove
moisture and tree sap.
Lubricate to repel moisture and
prevent rust.
Base Pole Extension Pole
Work with pole held to the side, NOT pointed into the body.
Wear head, eye and face protection that meets
ANSI standards to avoid injury.
Wear sturdy, protective safety shoes or boots with non-skid soles.
DO NOT USE NEAR ELECTRICAL LINES.
  • Page 1 1

Jameson SB-16TE Installation guide

Jameson
Brand
Jameson
Model
SB-16TE
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents