Satechi ST-AMSHS User guide

COMPATIBILITY

Supports all Apple iMac models with included Type-A to Type-C adapter

USB-C port can be used for data transfer only.

Charging through USB-C port is not supported.

Connect your devices to USB 3.0 ports (up to 5 Gbps)

and Micro/SD card reader slots (UHS-I, up to 104 Mbps).

Place the stand on the desk or other ﬂat surface and

put iMac on it. Make sure that the ports are on the front

side of the stand.

Organize the cable on the bottom side of the Stand.

For 2016 & older iMacs, use the included Type-A to

Type-C adapter to connect the stand’s cable to any

open USB-A port on the backside of the iMac.

For iMac Pro & 2017 iMacs, connect the stand’s cable

to any open USB-C port on the backside of the iMac.

TYPE-C ALUMINUM IMAC STAND

INSTRUCTIONAL GUIDE