Noble House 304496, 67024 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Noble House 304496 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Label Picture Description QTY
A
Foldable seat panel 1
Caution : You must read this before you proceed
SUNLOUNGER
CAUTION : This Sunlounger is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the sunlounger and to prevent damage to the sunlounger 02 people
may be needed to execute this action.
NobleHouseHomeFurnishingsLLC Page1of6
B
Leg frame 3
Label Picture Description QTY
Bolt (M6x30mm) 13
Sleeve Nut
(M6x13mm)
13
Allen Key 2
Before Beginning Assembly:
NobleHouseHomeFurnishingsLLC Page2of6
Step 1
Step 2
Overview
This Sunlounger has multiple parts and may require up to 30 minutes to assemble. To
give you an overview of the Sunlounger parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to familiarise
yourself with the parts and steps before assembly.
Unpack and place all parts on a clean, non-marring surface.
FRONT FACING
Foldable seat panel(A)
Leg frames (B)
NobleHouseHomeFurnishingsLLC Page3of6
Step 3
Step 4
2.1) Place the Sunlounger to a flat surface with the seat area up side down to the ground.
2.2) Unfold the backrest as shown in picture above.
Attach Leg frame (B) to Foldable seat panel (A) by using Bolt (), Sleeve nut () and Allen Key
() as shown in picture above.
Repeat the same process to attach 2 remaining Leg frames (B) to Foldable seat panel (A)
Do not fully tighten the Bolts.
B
A
Step 2.1
Step 2.2
A
NobleHouseHomeFurnishingsLLC Page4of6
With assistance from your adult partners, turn the Sunlounger right side up.
EXERT pressure, floorwards, onto the Seat.
This pressure will help the Legs and seat panel reach alignment at all joints.
Check for wobbles.
In a sequential manner, gradually tighten all Bolts until evenly secured.
Inspect the Sunlounger and make sure all parts are adequately connected.
Your Sunlounger is ready for use.
This Sunlounger can only be used on a flat, level surface.
NobleHouseHomeFurnishingsLLC Page5of6
Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
Not for commercial use. For residential use only .
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .Dust and pick-up spills using a clean, non-colored, lint-free cloth .
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is
recommended
.
To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain,
snow, and direct sunshine. Whenever possible cover the product and /or place under patio or awnings.
NobleHouseHomeFurnishingsLLC Page6of6
/