Logitech K585 User manual

HOW TO SET UP

Battery Door Removal

Remove keyboard battery door

Slide the upper part of the keyboard up to find the batteries and receiver storage inside.

Remove Pull-Tab

First, pull the tab from your keyboard. Your keyboard will automatically turn on. Channel 1 will

be ready to pair via either the USB receiver or via Bluetooth.

STEPS USB RECEIVER CONNECTION-A

Choose Operating System layout before plugging the receiver

Windows is the default layout. To switch to the macOS layout on your keyboard, before

plugging the receiver to your computer, press FN and “O” keys simultaneously and hold for 3

seconds. The OS layout will be selected after 3 seconds. To switch back to Windows layout, long

press the FN and “P” keys simultaneously for 3 seconds.

STEPS USB RECEIVER CONNECTION-B

Connect via the USB receiver

After setting the corresponding layout on your keyboard, get the USB Unifying receiver from the

compartment inside the battery door. Insert the receiver into any available USB port on your

desktop or laptop. Once the USB is inserted, your keyboard will be ready to use.

STEPS BLUETOOTH CONNECTION-A

Connect via Bluetooth

Open the Bluetooth preferences on your device. Add a new peripheral by selecting “Logi K585

Keyboard.” A code will appear onscreen. On your keyboard, type the code provided, and your

keyboard will be ready to use. The keyboard layout will automatically adapt to the device you

connect it to when using Bluetooth connection.

STEPS MULTI-DEVICES: EASY-SWITCH

Pair the keyboard with a second device

Long press for 3 seconds the Easy-Switch key - Channel 2. When the LED starts blinking the

second channel will be ready to pair through a Bluetooth connection. To discover how to connect

the keyboard via Bluetooth see previous connection steps.

STEPS:MULTI-DEVICES: EASY-SWITCH

Toggle between devices

Simply short press either channel 1 or 2 to switch typing on your devices.

STEPS BLUETOOTH CONNECTION-B

Select a specific OS Layout

To switch to other layouts long press for 3 seconds:

FN and “P” keys for Windows/Android

FN and “O” keys for Mac

FN and “I” keys for iOS

The LED on the channel 1 key will light up to show that the OS has been successfully changed.