2. FSR
  3. K-10D

FSR K-10D Owner's manual

  • Hello! I've reviewed the datasheet for the FSR K-10D Relay Module. This document describes a relay module that can be used as a single unit or a strip of five. It has breakaway tabs for easy separation and includes velcro for mounting, with two relay outputs. I'm ready to answer your questions about the module.
  • Can the relay modules be separated?
    How are the relay modules mounted?
    What voltage is used when the modules are used as a strip?
OF
REV.
PART#
DATE:
PRODUCT:
DWG.#
DRAWN BY:
APPROVED
REV. LEVEL REV. DATE
DESCRIPTION
PAGE
APPROVED BY:
DATE:
REF. ECO
C-1154
K-10D
AB 10-12-2011
Schematic
17296
Use enclosed Velcro to attach relay modules.
K-10D Relay Module
Use all five modules in strip or break them into individual modules.
When used as a strip +12V is jumped together on all modules.
K-10D Relay Module
Break-away tab
Break-away tab
Break-away tab
Orient the two strips of Velcro along both 4" widths of
the board to insulate solder side of the board from
mounting surface, or cut to individual pieces
for single module.
/