Humandata ACM-116L-027 User manual

Brand
Humandata
Model
ACM-116L-027
Type
User manual

This manual is also suitable for

HuMANDATA LTD.
Arria 10 GX F672 FPGA Board
ACM-116L Series Rev2
User’s Manual
Ver. 2.0
Table of Contents
Revision History .............................................................................................. 1
Introduction .................................................................................................... 1
1. Specifications ..................................................................................................... 2
2. Overview ............................................................................................................ 3
2.1. Name of Parts .......................................................................................................3
2.2. Block Diagram ......................................................................................................4
2.3. Power Supply ........................................................................................................4
2.4. I/O Power Supply .................................................................................................5
2.5. Clock ......................................................................................................................5
2.6. Setting Switch ......................................................................................................5
2.7. User Switch ..........................................................................................................5
2.8. User LED ..............................................................................................................5
2.9. Debug I/F ..............................................................................................................6
2.10. JTAG Connector .................................................................................................6
3. FPGA Configuration ........................................................................................... 7
4. Configuration Device Programming ................................................................... 7
4.1. Generating jic file .................................................................................................7
4.2. Programming Configuration Device ...................................................................8
5. Additional Documentation and User Support ..................................................... 8
Precautions
Do Not
1. This product uses ordinary off-the-shelf electronic components, and is therefore inappropriate for use in
applications that require special quality or reliability and are expected to protect human lives or prevent
accidents, such as safety mechanisms in fields including space, aeronautics, medicine, and nuclear
power.
2. Do not be used underwater or in high-humidity environments.
3. Do not be used in the presence of corrosive gases, combustible gases, or other flammable gases.
4. Do not turn on power when circuit board surface is in contact with other metal.
5. Do not apply voltage higher than rated voltage.
Attention
6. This manual may be revised in the future without notice owing to improvements.
7. All efforts have been made to produce the best manual possible, but if users notice an error or other
problem, we ask that they notify us.
8. Item 7 notwithstanding, HuMANDATA cannot be held liable for the consequences arising from use of
this product.
9. HuMANDATA cannot be held liable for consequences arising from using this product in a way different
from the uses described herein, or from uses not shown herein.
10. This manual, circuit diagrams, sample circuits, and other content may not be copied, reproduced, or
distributed without permission.
11. If the product emits smoke, catches fire, or becomes unusually hot, cut the power immediately.
12. Be careful of static electricity.
13. This product may be subject to the export restrictions of Japan, the United States, or other countries.
Purchasers are responsible for properly observing export restrictions.
14. HuMANDATA firmly refuses to export (including reexporting) products to countries or regions subject to
export restrictions.
Product Warranty and Scope of Support
1. HuMANDATA guarantees that its products can be assembled as shown in published circuit diagrams and other design documents.
There may be differences between actual components or their prescribed quantities and model numbers and those shown in circuit
diagrams.
2. Except for the guarantee in item 1, above, no guarantees whatsoever are made. When assembling the product as shown in a circuit
diagram is impossible, and the problem can be solved by revising the diagram, HuMANDATA will revise the diagram. When a problem
can be solved only by replacing components or modifying the product, HuMANDATA will take back the product to replace it with a
properly functioning product.
3. If the problem is minor, HuMANDATA will sometimes describe how to make the revision or modification, and ask the customer to
solve the problem.
4. HuMANDATA will determine how to honor the warranty, as through repair, replacement, return, or other action. The customer cannot
specify what action to take.
5. FPGAs and other components used in products sometimes have characteristic defects. Returns and replacements are not possible
even if such defects are discovered, whether before or after purchase.
6. HuMANDATA shall not be obligated to inform customers about defects in the main components used in products.
7. HuMANDATA shall not be obligated to provide support for products, or to provide support for the software of other companies needed
to use HuMANDATA products.
8. Published documentation shall be limited to that published by HuMANDATA at the time of product purchase, and HuMANDATA shall
not be obligated to provide any other documentation.
9. When repairs or replacements are provided under warranty in Japan, purchaser shall pay shipping charges for shipping to
HuMANDATA, and HuMANDATA shall pay shipping charges for shipping to purchaser.
10. When shipping from outside of Japan, purchaser shall pay all expenses including shipping charges and taxes.
11. Under whatever circumstances, HuMANDATA shall provide support for its products for a maximum of one year after shipping from
factory.
12. The Warranty is not applicable and support ends in the event of fire, storm and flood damage, earthquakes, lightning strikes, and
other natural disasters, as well as conflict or other occurrences.
13. Purchaser is assumed to have read and understood all the above when purchasing a HuMANDATA product.
Limitation of Liability
1. Purchasers assume all liability associated with the use of this product.
2. HuMANDATA assumes no liability whatsoever for any direct, indirect, special, incidental, or consequential damages arising from the
use of this product, even if HuMANDATA has been advised of the possibility of such damage, whether legal or in tort.
3. At the time this product is purchased, items 1 and 2 above shall be deemed to have been confirmed by purchaser.
Trademarks and Other Considerations
1. This manual uses various companies’ trademarks in places.
2. HuMANDATA is this company’s registered trademark.
HuMANDATA’s Philosophy
1. HuMANDATA endeavors to raise product quality. We continually make detailed improvements and adjustments that are not shown
in circuit diagrams.
2. HuMANDATA actively publishes, on the Web and in other ways, information considered useful to customers. Examples would be
how to use FPGAs and how to use development tools.
3. HuMANDATA makes efforts for the long-term provision of products and for continuing their long-term support.
4. Instead of concealing small product problems and documentation errors, HuMANDATA makes them public
5. HuMANDATA abides by Japanese law and its spirit. We make no transactions with purchasers who commit illegal acts.
1
ACM-116L Series v2.0
Revision History
Date
Revision
Description
Dec. 11, 2023 v2.0 Revised: Product Revision to Rev2
Introduction
Thank you for purchasing our product ACM-116L.
This is an evaluation board equipped with an Intel FPGA Arria 10 GX, power,
clock, and configuration circuit.
It can provide you with very convenient and easy-to-use development environment.
2
ACM-116L Series v2.0
1. Specifications
Model Name
ACM-116L-016 ACM-116L-022 ACM-116L-027 ACM-116L-032
FPGA
10AX016E4F
27E3SG
10AX022E4F
27E3SG
10AX027E4F
27E3SG
Power Input
DC 3.3 [V] + I/O Power Supply
User I/Os *1
128 (CNA: 64, CNB: 64)
Config. Device
MT25QU256ABA1EW9-0SIT
DDR3L SDRAM
MT41K512M8DA-107:P (Micron, 512M x 8)
On-Board Clock
50MHz,100MHz (CMOS),100MHz (LVDS)
(External inputs are available)
HS-Transceiver
Reference Clock
125MHz (LVDS)
User LED
2
User Switch
2 (Push x 1, DIP x 1bit)
Power-On Reset
240 [ms] typ. (Configuration Reset Signal)
User I/O Connectors
FX10A-80P/8-SV1 (Hirose) x 2
PCB
10 Layer FR-4 t1.6 [mm] Immersion gold
JTAG Connector
DIL 10-pin socket, 2.54 [mm] pitch
Status LEDs
Power (red), Done (blue)
Dimensions
1.693" x 2.126" (43 x 54 [mm])
Weight
17 [g] typ.
Accessories
DIL 10 long pin header
FX10A-80S/8-SV (Hirose) x 2
RoHS Compliance
YES
* There may be cases that these parts and specifications are changed.
*1 Please refer to the section, 2.4 I/O Power Supply, for usable range of user I/Os.
3
ACM-116L Series v2.0
2. Overview
2.1. Name of Parts
Component Side
Solder Side
User I/Os (CNA)
LVDS Clock
(100MHz)
Setting SW
User SW
User LEDs
Debug I/F
FPGA
JTAG
Power LED
Done LED
User I/Os (CNB)
HS-Transceiver
Reference Clock
Clock (50MHz)
Clock (100MHz)
DDR3L SDRAM
Config. Device
4
ACM-116L Series v2.0
2.2. Block Diagram
2.3. Power Supply
This board operates from single DC 3.3 V power supply from the CNA. External
power supply should be sufficient and stabilized. Please do not apply over 3.3V
voltage.
About I/O Power Supply, please refer to the next section.
Arria 10 GX
10AX016E4F27E3SG
10AX022E4F27E3SG
10AX027E4F27E3SG
10AX032E4F27E3SG
Power LED (3.3V)
DONE LED
VCCOA INPUT
VCCOB INPUT
JTAG
Buffer
64
User LED
Oscillator
50MHz,100MHz
100MHz(LVDS)
Power Circuit
0.9V,1.03V,1.8V
1.35V,0.675V
2
JTAG
Config. Mode Switch
Config. Device
ALTGX Tx / Rx
Push Switch x1
Dip Switch x1
External CLK (option)
User I/Os CNA
64
ALTGX Tx / Rx
User I/Os CNB
External CLK (option)
2
ACM-116L Rev.B
ALTGX Ref. Clk
125MHz
POR
3.3 V INPUT
DDR3L SDRAM
(4Gbit)
8
5
ACM-116L Series v2.0
2.4. I/O Power Supply
FPGA banks are divided to Bank Group A and B. Please make sure to input
arbitrary power from VIOL of CNA and CNB connectors.
Connector Net Label Power Range
CNA
VIOLA
1.2-1.8V
CNB VIOLB 1.2-1.8V *1
*1 By switching mounting position of RJ2, some I/O can be used as 3.0VI/O.
For more details, please refer to the FPGA datasheet and circuit schematics.
2.5. Clock
Oscillators, 50 MHz (U15) and 100 MHz (U4), are equipped as on-board clock.
External clock can be input from user I/O connectors.
For more details, please refer to circuit schematics.
2.6. Setting Switch
You can use SW1 to set a configuration mode of the FPGA.
SW1
Configuration Mode
1 2
MSEL ASW
PS (Passive Serial)
ON
X
AS (Active Serial) OFF
X
* ON=Low, X=Don’t Care
2.7. User Switch
You can use SW1[2] and SW2 for general purpose. They are pulled up,
so you can input low level signal to the FPGA when you push them.
2.8. User LED
You can use L2 and L3 for general purpose. They are active high.
6
ACM-116L Series v2.0
2.9. Debug I/F
Pin No.1 and 3 are connected through resisters to FPGA directly.
They can be used for any purpose. Pin No.2 is GND.
2.10. JTAG Connector
This connector is used to configure the FPGA and to access to
configuration device in system.
After configuration is completed successfully, the DONE LED will
light up. If the VIO(B) voltage is low, the LED will not light up. But
it doesn't affect FPGA operations.
Pin assignment is as follows.
CN2
Signal Name
JTAG Pin
Signal Name
TCK
1
2
GND
TDO 3 4 VCC
TMS
5
6
-
-
7
8
-
TDI
9
10
GND
Please pay attention not to attach cables in reverse.
Notice
7
ACM-116L Series v2.0
3. FPGA Configuration
To configure the FPGA via JTAG directly, assign a sof file
to the FPGA detected by [Auto Detect]. If configuration is
completed successfully, the DONE LED will light up.
4. Configuration Device Programming
A jic (JTAG Indirect Configuration) file is required to download an FPGA
configuration data into the configuration device via JTAG. To generate a jic file
using Quartus, please refer to the following example with Quartus Prime 17.1.
4.1. Generating jic file
1. Open [File] menu and click [Convert Programming Files..].
Programming File type : JTAG Indirect Configuration File (.jic)
Configuration device : MT25QU256
Mode : Active Serial (x4 is not supported)
* When you cannot select [MT25QU256], please add the following variable into
your quartus.ini file in the project directory.
pgm_allow_mt25q = on
If you cannot find the ini file, please create quartus.ini file and save it in the
project directory or <Quartus Prime install directory> ¥bin64.
After add the variable and open your project again, then you can select MT25Q
device.
For more details, please refer to the Intel KDB.
2. Set the FPGA device name to “Flash Loader” and your sof file to “SOF Data”.
8
ACM-116L Series v2.0
3. Click [Generate]
4.2. Programming Configuration Device
Assign the jic file to the detected device and start programming. Please set a
configuration mode to AS mode.
5. Additional Documentation and User Support
The following documents and other supports are available at
https://www.hdl.co.jp/en/spc/ACM/acm-116L/
Circuit Schematic
Pin List
Outline Drawing
PCB Drawing
Net List
… and more.
Arria 10 GX F672 FPGA Board
ACM-116L Series Rev2
User’s Manual
Ver. 2.0 .................................. December 11, 2023
HuMANDATA LTD.
Address: 1-2-10-2 F, Nakahozumi, Ibaraki
Osaka, Japan
ZIP 567-0034
Tel: 81-72-620-2002 (Japanese)
Fax: 81-72-620-2003 (Japanese/English)
URL: https://www2.hdl.co.jp/en/ (Global)
https://www.hdl.co.jp (Japan)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Humandata ACM-116L-027 User manual

Brand
Humandata
Model
ACM-116L-027
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers