Oneida Air Systems XCKM010000-VOR Operating instructions

Oneida Air Systems
Brand
Oneida Air Systems
Model
XCKM010000-VOR
Type
Operating instructions

This manual is also suitable for

Not to Size.
Carriage
Bolt
Hex Bolt
Hex Bolt
Cyclone
Rubber
Washer
Rubber
Washer
Foam
Gasket
1/4” Steel
Washer
Steel
Washer
Steel
Washer
Steel
Washer
Steel
Washer
Whiz Nut
Whiz Nut Whiz Nut
Brace
ZBI000022
RBB000003 - Sheet Metal Strut
Attaches to
Cyclone
Attaches
to Drum
RHS0090403 - Web Handles
RHS000050 - 50” Web Strap
RHS203016 - Lock Sliders
STP000006 - Handle Plate
Oneida Air Systems Dust Cobra Upgrade Kit - AKC000001
Struts - AXC000001
Drum Handles - AXC000002
Tether Strap - AXC000003
You can replace the wire formed struts with the new sheet metal
struts. They t the same holes as the wire formed struts and they
also have two pre-drilled holes so you can mount the Dust Sentry
to the new strut if desired.
1. Drill a 5/16” hole for handle placement.
2. Pull webbing through top loop of your handle plate.
3. Pull around and through the back of the second loop.
4. Pull around and through the front of the third loop.
5. Tuck any excess webbing behind the handle plate and
secure your plate to the drum.
1. Install a J-bolt in the front of the Universal Dolly.
2. Use one of the ladder lock slider buckles to secure one end of the
strap to the J-bolt.
3. Loop the other end of the strap around the center of the inlet hose.
4. Use the second ladder lock slider buckle to seciure the strap to the
inlet hose.
Threading the webbing of the handles.
All hardware is included in the kits.
Pull strap tight
Loop this
end around
hose.
Thread strap through ladder
lock slider buckle.
  • Page 1 1

Oneida Air Systems XCKM010000-VOR Operating instructions

Oneida Air Systems
Brand
Oneida Air Systems
Model
XCKM010000-VOR
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents