l M L4410
dual 9-pin dot matrix printer
The ML4410 is the flagship model in Oki's MICROLINE range. It has been
designed to handle multi-part listings at extremely high speeds, with
reliability and superior throughput. With low cost of ownership it is ideal.
l
l
l
l
l
l
l
the definition of durability and performance
main features of the ML4410 printer
Super speed, 136 column dot matrix printer
Dual 9-pin ultra reliable print head
Up to 1066 characters per second print speed
Multi-part paper-handling (original + 9 copies)
Ideal for high volume tasks such as accounts, finance and IT -
superb speed for listings and computer printouts
Ideal for purchasing and distribution applications (up to 10 part paper)
ML4410 DOT MATRIX PRINTER
PRODUCT SPECIFICATION
As an ENERGY STAR Partner, Oki Europe Ltd
has determined that this product meets the
ENERGY STAR guidelines for energy efficiency
Only use genuine Oki Original consumables to ensure the best quality and performance from your hardware. Non Oki Original products may damage your
printer’s performance and invalidate your warranty. Specifications subject to change without notice. All trademarks acknowledged.
®
ML4410 DOT MATRIX PRINTER
18 (2x9)
No. of multi-part forms
Font & print features
T
Memory
Noise level (ISO 7779)
Frequency
Reliability Print head life
Ribbon life
Supplies life MTBF 12,000 hours
ML4410
General Number of pins
Front feed: 10 (one original + 9 copies); Rear feed: 6 (one original + 5 copies)
Speed & throughput High speed draft (10cpi) 1066cps
Utility (10cpi) 800cps
Near letter quality (10cpi) 200cps
Fastest print speed 1066cps
Carriage width (10cpi) 136 columns
Max. in compressed mode 272 columns
Character pitch 10/12/15/17.1/20cpi & proportional
Graphics resolution Up to 240(H) x 216(V)
ypeface & Font NLQ-Courier (Scalable), NLQ-Gothic (Scalable), OCR-B, High Speed
Draft, Utility + Barcodes
Typestyle Emphasised, Enhanced, Double Width, Double Height, Italics,
Underline, Superscript, Subscript, Overscore
Emulations & interfaces Printer emulations Epson FX, IBM ProPrinter, Oki MICROLINE
Standard interfaces Centronics Parallel - IEEE 1284, Serial RS 232C
Optional interfaces Oki HSP Network interface card
Control panel 2 x 16 backlit LCD, 13 button with configuration memories
OS Compatibility Novell Netware certified, Microsoft Plug & Play
Paper-handling Continuous paper 76—419mm
First printable line Continuous: 8.9mm
(from top of page)
Standard Autoload, Paper parking, Rear push tractors, Front (straight) push
tractors, Auto bail arm, Auto gap, Software selectable paper paths
Optional Dedicated stand/cabinet with paper storage and output tray
Physical Dimensions (HxWxD) 358 x 768 x 385mm
Weight 42kg
(Total RAM) 512KB (max. 256KB addressable); Receive buffer: max. 56KB
Flash ROM 8MB for code pages, emulations and macros
55dB(A) (quiet mode - Utility); 52dB(A) (quiet mode - NLQ)
Power Power requirements 230V AC
50/60Hz ± 2%
400 million characters at 10cpi utility, 25% duty and 35% page density
15 million characters
09
400
92
3
2
003
O
i E
r
ope
Ltd.
© k
u
Oki Systems (UK) Ltd,
550 Dundee Road,
Slough, Berkshire
SL1 4LE
United Kingdom
tel: +44 (0)1753 819819
fax: +44 (0)1753 819899
www.oki.co.uk
Oki Systems (UK) Ltd, Part of Oki Electric
/