● Extend a USB 3.0 SuperSpeed device connection up to 33ft
●
Built
-in booster chipset amplifies USB 3.0 signals for robust performance
● USB 3.0 transfer rates of up to 5Gbps for th best data transmission
● Up to 10x faster than USB 2.0
●
Plug & Play design
-no drivers or power supply needed
● Daisy chain up to 5 BoostLinqs to reach a maximum distance of 165ft*
● Backwards compatible with USB 2.0 and 1.1 devices
*Requires optional power supply
USB Extender Cable
The IOGEAR USB 3.0 BoostLinq extension cable uses active electronics to amplify the USB signal and maintain USB 3.0 SuperSpeed data transfers over extended distance, with no loss of
data integrity or signal quality. The cable has male and female USB type "A" connectors. The USB "A" connector is the rectangular shaped plug found on PC's, hubs, and many other host
interfaces. BoostLinq extends from the USB host computer and provides another female "A" connector up to 33 feet away for all your USB needs.
It is compatible with both PC and Mac computers and is backwards compatible with USB 2.0 and 1.1 devices. It is ideal for applications that require distance between a user and the
peripheral but still need the data transfer speeds of USB 3.0, such as webcams, hard drives, printers, smartboards, etc.
The IOGEAR USB 3.0 BoostLinq extension cable is Plug
-and-Play, no additional drivers or complicated set up required. It also gives you the ability to daisy-chain a maximum of five cables
together in order to reach up to a total of 165 feet of USB 3.0 SuperSpeed connection.