ENGLISH
Introduction
Douwe Egberts and Philips have specially
developed this pod holder to make a high-quality
hot choco drink with one push of the button. Use
this SENSEO
®
Choco pod holder together with
the special Douwe Egberts SENSEO
®
Choco pods
in your SENSEO
®
machine.
This instruction leaet is a supplement to the
user manual of your SENSEO
®
machine. It only
describes how you should use the specially
designed SENSEO
®
Choco pod holder with the
purple handle in your SENSEO
®
machine. For all
other instructions, please consult the user manual
that came with your SENSEO
®
machine.
For information regarding a SENSEO
®
Choco pod
holder for other SENSEO
®
models, contact the
Philips Consumer Care Centre.
General description (Fig. 1)
A Handle
B Metal pod holder
C Plastic hot choco outlet
Before first use
The SENSEO
®
Choco pod holder with the
purple handle is only suitable for use in
SENSEO
®
machine models HD7852-HD7850,
HD7842, HD7841 and HD7830-HD7820
. It is NOT suitable for SENSEO
®
models
HD7840, HD7812-HD7805 and HD7800
(Fig. 2).
1 Clean the SENSEO
®
Choco pod holder with
hot water and some washing-up liquid or in
the dishwasher.
Now you are ready to prepare SENSEO
®
Choco
with your SENSEO
®
Choco pod holder.
Using the SENSEO
®
Choco pod holder
Tip: If you have used the SENSEO
®
machine to make
coffee, ush the machine to remove coffee residues
before you prepare a hot choco drink. To ush the
machine, put the SENSEO
®
Choco pod holder with
the purple handle in the machine without a pod and
place a glass (or mug) with a capacity of at least
150ml under the spout. Then close the lid and press
the 1-cup button.
Tip: To make sure your hot choco drink has the right
temperature, heat up your glass (or mug) before you
prepare a hot choco drink. You can heat up your glass
(or mug) by placing it under the spout when you ush
the machine or by rinsing the glass (or mug) under a
hot tap.
1 Fill the water reservoir with cold water up to
the MAX indication and put it back onto the
machine.
Never pour other liquids than drinking water into
the water reservoir.
A full reservoir allows you to prepare a hot
choco drink a number of times. This makes it
unnecessary to ll the water reservoir each
time you want to prepare a glass (or mug) of
SENSEO
®
Choco.
2 Press the on/off button.
The light in the on/off button ashes when
the water heats up.
Heating up takes approx. 90 seconds.
When the light is continuously on, the
machine is ready for use.
3 Open the lid of the machine.
If there is still a pod holder in the machine, remove
it.
,
-
,
,
4 Place the SENSEO
®
Choco pod holder with
the purple handle in the machine.
The coffee pod holders are NOT
suitable for
preparing SENSEO
®
Choco.
5 Place a SENSEO
®
Choco pod properly in the
centre of the SENSEO
®
Choco pod holder
with the convex side pointing downwards and
lightly press the pod.
Only use SENSEO
®
Choco pods, as they have
been specially designed to prepare SENSEO
®
Choco in the SENSEO
®
machine with
the special SENSEO
®
Choco pod holder.
Never use torn pods or loose cocoa powder, as
this causes the machine to become blocked.
Never use any cups, capsules or coffee pods in
this pod holder.
6 Close and lock the lid.
Make sure the lid is locked properly.
HD7842, HD7841, HD7830-HD7820 only: Never
press the 1-cup button or the 2-cup button when
the lid is still open.
Note: HD7852-HD7850 only: It is not possible to
prepare a hot choco drink when the lid is not properly
closed and the lid lever is not locked.
7 Place one glass (or mug) with a capacity of at
least 150ml under the spout.
HDHD7842, HD7841, HD7830-HD7820 only:
You can adjust the height of the coffee spout
by sliding it upwards or downwards.
HD7852-HD7850 only: Turn the knob to adjust
the height of the drip tray so that the top of
your glass (or mug) is just under the spout.
8 HD7852-HD7850 only: Press the coffee
select button to select À.
9 Select g for a medium glass (or mug) of
150ml.
10 Press the 1-cup button.
The SENSEO
®
machine starts to prepare
SENSEO
®
Choco.
The machine automatically supplies the
optimal amount of water for one glass (or
mug) of SENSEO
®
Choco.
You can interrupt the SENSEO
®
Choco
preparation process at any time by pressing the
on/off button.
If you switch the machine back on after you have
interrupted the preparation process, the machine
does not complete the interrupted preparation
cycle.
Do not remove the water reservoir during
a preparation cycle, as this causes the machine to
draw in air. When this happens, the machine only
partly lls the next glass (or mug).
11 Remove the SENSEO
®
Choco pod holder
with the purple handle after use and throw
away the used SENSEO
®
Choco pod.
Be careful when you do this. There may still
be some hot water or hot choco in or on the
SENSEO
®
Choco pod.
12 When you have used the SENSEO
®
machine
to prepare a hot choco drink, ush the
machine with hot water before you use it to
brew coffee.
Flushing removes choco residues that
may be left behind in the machine. To ush
the machine, place the SENSEO
®
coffee
pod holder without a pod in the machine
and place a glass (or mug) with a capacity of
at least 150ml under the spout. Then close
the lid and press the 1-cup button.
-
-
-
,
,
,
Additional steps when preparing a hot
choco drink with extra milk (HD7852-
HD7850 only)
1 Fill the milk container with cold milk
(refrigerator temperature) up to the ¶ level
(Fig. 3).
2 Place the milk container unit into the
SENSEO
®
machine (1) and push down the
milk container lever (2) (Fig. 4).
3 Place the SENSEO
®
Choco pod holder in the
machine and place a SENSEO
®
Choco pod in
the pod holder.
4 Close the lid and lock the lever.
5 Press the coffee select button to select ¶.
6 Place one glass (or mug) with a capacity of at
least 180ml under the spout.
Turn the knob to adjust the height of the drip tray,
if necessary.
7 Press the 1-cup button.
Do not remove the water reservoir during a
brewing cycle, as this will cause the machine to
draw in air. When this happens, the next cup will
only be partly lled.
Do not remove the milk container during a
brewing cycle.
8 Remove the SENSEO
®
Choco pod after use
by lifting the pod holder out of the machine
and emptying it.
Be careful when you do this, for there may still
be some hot water or hot choco in or on the
SENSEO
®
Choco pod.
9 Flush the milk container unit after you
have brewed SENSEO
®
Choco (see section
‘Flushing after every use’ in chapter ‘Cleaning’
of the user manual).
Cleaning
1 Remove the SENSEO
®
Choco pod holder
with the purple handle from the SENSEO
®
machine and throw away the used SENSEO
®
Choco pod.
2 Clean the SENSEO
®
Choco pod holder with
the purple handle in hot water after every
use.
If necessary, use some washing-up liquid or put the
pod holder in the dishwasher.
3 Make sure the sieve in the centre of
the SENSEO
®
Choco pod holder with the
purple handle is not clogged.
If the sieve is clogged, unclog it by rinsing the pod
holder under a running tap. If necessary, use a
washing-up brush to clean the sieve.
4 Rinse the SENSEO
®
Choco pod holder with
the purple handle with fresh water after
cleaning.
5 Place the SENSEO
®
Choco pod holder with
the purple handle back into the machine or
store it.
Tip: We advise you to clean all detachable parts of
the SENSEO
®
machine regularly.
Guarantee & service
If you need service or information or if you have
a problem, please visit the Philips website at www.
philips.com or contact the Philips Consumer Care
Centre in your country (you nd its phone number
in the worldwide guarantee leaet).
