Philips DC912/37 Quick start guide

Philips
Brand
Philips
Model
DC912/37
Category
Audio tuners
Type
Quick start guide

Philips DC912/37 is a versatile device that combines a Hi-Fi system with iPod playback and other features. With its wide range of capabilities, it offers a rich and immersive audio experience.

Key Features and Use Cases

  • Superior Sound Quality: Enjoy your music with crystal-clear sound thanks to the Hi-Fi system's powerful speakers and subwoofer.

  • Versatile Connectivity: Connect your iPod, USB devices, SD/MMC cards, or other audio sources with ease, providing you with multiple options for music playback.

  • Effortless iPod Playback: Dock your compatible iPod using the included adaptors and control playback directly from the system or remote control.

Philips DC912/37 is a versatile device that combines a Hi-Fi system with iPod playback and other features. With its wide range of capabilities, it offers a rich and immersive audio experience.

Key Features and Use Cases

  • Superior Sound Quality: Enjoy your music with crystal-clear sound thanks to the Hi-Fi system's powerful speakers and subwoofer.

  • Versatile Connectivity: Connect your iPod, USB devices, SD/MMC cards, or other audio sources with ease, providing you with multiple options for music playback.

  • Effortless iPod Playback: Dock your compatible iPod using the included adaptors and control playback directly from the system or remote control.

What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
2
User Manual
Remote Control
Quick Start Guide
User Manual
Quick Start Guide
DC912
Pull out the plastic
protective sheet
before use.
AC power adaptor
3 X iPod dock adaptors
AC power cord
(for the subwoofer)
DC912_37_QSG_Eng 8/25/08, 10:311
1
2
3
4
5
6
7
In standby mode, press and hold PROG/SET TIME on the remote control.
Press VOLUME +/- (or VOL +/- on the remote control) to switch
between 12 hour and 24 hour display.
Press PROG/SET TIME on the remote control again to confirm.
➜ The clock digits flash on the display panel.
Press VOLUME +/- (or VOL +/- on the remote control) to set the hours.
Press PROG/SET TIME on the remote control again.
➜ The clock digits for the minutes flash.
Press VOLUME +/- (or VOL +/- on the remote control) to
set the minutes.
Press PROG/SET TIME on the remote control to confirm the time.
Tip
– See the User Manual for how to
connect other equipment to this
system.
– Use the supplied AC power
adaptor only! Using any other
power connection device may
damage your main set!
Setting the clock
1
2
Connect the AC power adaptor of the system.
Connect the AC power cord of the subwoofer to the AC outlet.
1
2
In case the wireless connection fails due to conflict or strong
interference etc., you may need the following procedures for
manual pairing:
1 In standby mode, press and hold 2; on the set for three seconds to
activate signal transmitting.
➜ “PAIR” flashes on the display screen.
2 Press and hold the PAI R button on the rear of the subwoofer for
three seconds to activate signal receiving.
➜ The LED indicator on the subwoofer flashes in blue and green
alternatively.
● If the connection succeeds, the display shows “PASS”.
● If the connection fails or the connection cannot be set up successfully
within 60 seconds, the display shows “FAIL”.
DC912_37_QSG_Eng 8/25/08, 10:312
Enjoy
C
1
2
3
Insert the USB device’s USB plug into the socket or fully insert the SD/MMC card into
the SD/MMC slot on the top of the system.
Press SOURCE once or more (or USB/CARD on the remote control) to select
USB/CARD.
Play the available audio files using playback buttons on the set or remote control (such as
2; , S/T).
Playing a USB mass storage device/SD/MMC card
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1) and memory cards
Programming and tuning to radio stations
1
2
3
Press SOURCE repeatedly (or TUNER on the remote control) to select the
tuner source (FM).
Press PROG for more than two seconds to program all available stations in order
of waveband.
Press PRESET +/- (or ALBUM/PRESET 3 / 4 on the remote control) until the
desired preset station is displayed.
DC912_37_QSG_Eng 8/25/08, 10:313
Enjoy
C
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
C Royal Philips Electronics N.V. 2008
All rights reserved.
PDCC-ZYL-0835
Playing Apple iPod using DC912
1
2
3
Select the correct dock adaptor, as indicated on each adaptor, then fit it in
the dock.
Correctly place the compatible iPod player into the dock.
Press SOURCE on the system repeatedly or iPod on the remote control
to select the iPod source.
Power on your iPod player.
Select and play your favourite songs stored in the iPod player.
4
5
Notes for remote control:
– First select the source you wish to control by pressing one of the
source select keys on the remote control (for example iPod,
TUNER).
– Then select the desired function (for example ÉÅ, à, á).
DC912_37_QSG_Eng 8/25/08, 10:314
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Philips DC912/37 Quick start guide

Philips
Brand
Philips
Model
DC912/37
Category
Audio tuners
Type
Quick start guide

Philips DC912/37 is a versatile device that combines a Hi-Fi system with iPod playback and other features. With its wide range of capabilities, it offers a rich and immersive audio experience.

Key Features and Use Cases

  • Superior Sound Quality: Enjoy your music with crystal-clear sound thanks to the Hi-Fi system's powerful speakers and subwoofer.

  • Versatile Connectivity: Connect your iPod, USB devices, SD/MMC cards, or other audio sources with ease, providing you with multiple options for music playback.

  • Effortless iPod Playback: Dock your compatible iPod using the included adaptors and control playback directly from the system or remote control.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents