Assembling
14
Plug one end (micro-USB) of the USB cable into the
2
multifunction jack.
Plug the other end of the USB cable into a USB port
3
on a PC.
Depending on the type of USB cable you are using,
it may take some time before charging begins.
When the battery is fully charged (the battery icon is
4
no longer moving), unplug the USB cable from the
device and then from the PC.
Insert a memory card (optional)
To store additional multimedia les, you must insert
a memory card. Your device accepts microSD
™
or
microSDHC
™
memory cards with maximum capacities
of 32 GB (depending on memory card manufacturer and
type).
When the battery is fully charged (the battery icon is
4
no longer moving), unplug the travel adapter from the
device and then from the power outlet.
Do not remove the battery before removing the
travel adapter. Doing this may cause damage to the
device.
To save energy, unplug the travel adapter when not
in use. The travel adapter does not have a power
switch, so you must unplug the travel adapter from
the outlet to interrupt the power supply. The travel
adapter should remain close to the socket when
in use.
Charge with a USB data cable
›
Before charging, ensure that your PC is turned on.
Open the cover of the multifunction jack.
1