BEAUTY ANGEL RVT 28 Operating Instructions Manual

Brand: BEAUTY ANGEL

Model: RVT 28

Type: Operating Instructions Manual

This manual is also suitable for

BARVT28

Operating instructions

BEAUTY ANGEL RVT 28

1010978-0 / us / 0.201

Contact information

Technical Service JK-Global Service

A Div of JK Products & Services, Inc.

#1 Walter Kratz Drive

Jonesboro, AR 72401

800-445-0624

870-935-9046

e-mail: support@jkamerica.com

http://support.jkamerica.com

WARNING!

Read these operating instructions.

Failure to observe these instructions:

• may result in serious injury and death,

• can result in damage to the device and the

environment.

– For the safety of yourself and others, read and observe

all instructions contained herein before operating the

device.

– Please make the instructions and additional information

available to anyone who operates or services the de-

vice.

The copyright remains with JK-Holding GmbH.

The contents may not be duplicated (in whole or part), distributed or utilized

for competition purposes without authorization or disclosed to other parties.

The right to make technical changes in regard to the figures and information

contained in this instruction manual is reserved!

Table of contents

02/2012 1010978-01 Operating instructions – 3

Table of contents

1 General...........................................................................................5

1.1 Definitions .......................................................................................5

1.2 Identify your device .........................................................................5

2 Safety notices................................................................................6

2.1 Description of warning signs ...........................................................6

2.2 Instructions pertaining to a risk of fire, electric shock, or injury .......7

2.2.1 Beauty device..................................................................................7

2.2.2 VibraShape (Vibration plate) ...........................................................8

2.3 Instructions pertaining to a risk of damage to the machine ...........10

3 Information for the studio operator........................................... 11

3.1 Intended use .................................................................................11

3.2 Foreseeable misuse......................................................................11

3.3 Obligations of the studio operator .................................................11

3.4 Staff training..................................................................................12

3.5 Installation location........................................................................ 12

3.5.1 Ventilation .....................................................................................12

3.6 Export............................................................................................12

3.7 MP3 music ....................................................................................13

3.8 Disposal ........................................................................................13

3.8.1 Environmental regulations – disposal of lamps ............................13

3.9 Instruction signs on the device......................................................13

3.10 Technical modifications................................................................. 13

4 Description ..................................................................................14

4.1 Scope of delivery........................................................................... 14

4.1.1 Optional.........................................................................................14

4.2 Equipment.....................................................................................14

4.3 Device description.........................................................................15

4.4 Accessories (optional)...................................................................16

4.5 VibraShape ...................................................................................16

4.6 Description: vibration programs ....................................................17

5 Operation .....................................................................................18

5.1 Mandatory reading ........................................................................18

5.2 Application tips.............................................................................. 19

5.3 Operation overview .......................................................................21

5.3.1 Navigation .....................................................................................22

5.4 Functions ......................................................................................23

5.5 Start ..............................................................................................24

5.5.1 Preparation time............................................................................24

5.5.2 Interrupt or end the application .....................................................24

5.6 Connect MP3 player......................................................................25

Table of contents

6 Cleaning and maintenance.........................................................26

6.1 Safety instructions for cleaning and maintenance .........................26

6.2 Faults.............................................................................................27

6.3 Cleaning ........................................................................................28

6.3.1 Disinfection....................................................................................28

6.3.2 Cleaning of surfaces......................................................................28

6.3.3 Lamps............................................................................................29

6.4 Cleaning plan ................................................................................29

6.5 Maintenance..................................................................................30

6.6 Maintenance plan ..........................................................................30

6.7 Instructions for replacing the lamps...............................................32

6.7.1 Low pressure lamps ......................................................................32

6.8 Cleaning or replacing the lamps on the left ...................................33

6.9 Cleaning or replacing the lamps on the right .................................34

6.10 Cleaning or replacing interior lighting ............................................35

7 Technical data .............................................................................36

7.1 Power rating, electrical specifications and noise level...................36

7.2 Dimensions....................................................................................37

7.3 Lamp configuration........................................................................38

7.3.1 BEAUTY ANGEL RVT 28..............................................................38

7.3.2 Accent lighting ...............................................................................39

7.4 Spare parts and accessories.........................................................39

8 JK-Products, Inc. – Limited Warranty........................................40

8.1 Limited Acrylic Warranty................................................................41

8.2 Warranty Claims............................................................................41

8.2.1 Policy & Procedures ......................................................................41

8.2.2 Labor Warranty Claim/Credit Procedures......................................42

8.3 Limited Lifetime Warranty..............................................................42

9 Appendix......................................................................................44

9.1 Signs and stickers on the device...................................................44

10 Index.............................................................................................48

Genera

02/2012 1010978-01 Operating instructions – 5

1 General

1.1 Definitions

Operator

Person who provides the devices described here to users on a commercial

basis. The operator is responsible for the correct operation of the device as

well as compliance with the maintenance intervals.

User

A person who uses the device at a commercial location.

Staff

People who are responsible for the operation, cleaning as well as general

maintenance work and who instruct the users in the operation of the devices.

Electrician

A person with suitable professional training, knowledge and experience which

enables them to identify and avoid the dangers which can arise from working

with electricity.

Authorized, trained and qualified staff

Qualified staff from an external company who have been trained and author-

ized by the manufacturer for assembly and maintenance work with specific

devices.

1.2 Identify your device

For contact with Customer Services, please write down the device number of

your device, see page 44.

Safety notices

2 Safety notices

2.1 Description of warning signs

Danger notices, damage to persons:

DANGER!

Type and source of danger, e.g. 'DANGER – High volt-

age!'

Description of the consequences, e.g. 'You can be killed or

injured by an electric shock!'

Countermeasures:

– Disconnect device from power supply before opening.

– Do not reach into the inside with the device switched

on.

Warning notices, damage to persons:

WARNING!

Type and source of danger, e.g. 'WARNING – hot sur-

face!'

Description of the consequences, e.g. 'You can burn your

hand (skin, face)!'

Countermeasures:

– Do not touch hot parts and nearby surfaces.

– Wait until hot parts and surfaces have cooled down.

Caution notices, damage to property:

CAUTION!

The word 'Caution' with this label points out that danger for

devices, materials and the environment can be expected

here.

Important information:

NOTE:

This symbol does not identify safety notices, but states in-

formation for a better understanding of the processes.

Safety notices

02/2012 1010978-01 Operating instructions – 7

2.2 Instructions pertaining to a risk of fire,

electric shock, or injury

2.2.1 Beauty device

DANGER – HIGH VOLTAGE!

You can be killed or injured by an electric shock!

Assembly and electrical connection must comply with na-

tional and local regulations.

– The device may only be assembled, installed, upgraded

or repaired by specially trained and instructed person-

nel.

WARNING!

Danger of long-term consequences!

The following people are not allowed to use the equipment:

– Pregnant women

– People younger than 18

– People with epilepsy

– People with illnesses which cause light sensitivity

– People who take medication or herbal remedies which

cause light sensitivity (e.g. antibiotics, antirheumatic

agents, antifungal agents or St. Johns wort)

WARNING!

Delayed Healing!

A light treatment is not recommended in the following cir-

cumstances:

– If you have utilized an oxygen facial pack in the last

24 hours,

– If your facial skin has been electronically tightened in

the last 24 hours,

– If your skin has been treated with chemical peel or

abrasives,

– If you have received a facial injection in the last

24 hours.

Safety notices

WARNING!

Infections can be transferred through skin contact!

All items/equipment components, with which the user can

come into contact during the application, must be disinfected

after every application:

– Protective goggles

– Acrylic panels

– Holding bars and control panel

– MP3 cable

– Floor mat (Plastic)

– Use only approved cleaners to disinfect the device and

its components.

NOTE:

Extending the specified application times cannot place ex-

cessive demands on the skin due to the emitted light. How-

ever we recommend a 24 hour break after a 12 minute treat-

ment.

NOTE:

A light application is not damaging to the eyes. However, we

recommend wearing eye protection during the application in

order to protect the eyes against the bright light.

2.2.2 VibraShape (Vibration plate)

WARNING!

Risk of damage to health!

Vibrations can lead to or intensify health problems. You

should never use the vibration plate when you are affected

by one of the following health restrictions:

– Pregnancy

– DVT (Deep Veneous Thrombosis)

– New wounds resulting from an operation or a surgical

intervention

– Epilepsy

– Acute diseases / inflammation process

– Pacemaker

– Retinal detachment

– Acute osteoporosis

Safety notices

02/2012 1010978-01 Operating instructions – 9

WARNING!

Risk of damage to health!

Vibrations can lead to or intensify health problems. You

should only use the vibration plate after consulting your

doctor when you suffer from one of the following health

restrictions:

– Cardiovascular diseases

– Hip and knee implants

– Severe diabetes

– Severe cases of migranes

– Tumors

– Gallstones or kindney stones

– Acute thrombosis

– Acute inflammation of the musculosketal system

– New fractures in trained body regions

– New infections

– Acute hernia / intervertebral disc diseases / spondyloly-

sis

– When intrauterine devices, spirals, metal pins, screws

or plates have been inserted recently

– Rheumatoid arthritis

– Active atrosis and athropathy (joint diseases)

People with recently implanted intrauterine devices (contra-

ceptive coils), metal pins, screws or plates are also only to

use the device after consultation with their doctor.

Side effects

The use of the vibration plate may lead to the following side effects:

y Itching in regions of the body being trained

y Nausea and vertigo

y Rapid and brief fall in blood pressure

y Rapid hypoglycemia with diabetes

Diabetics should always have dextrose with them! The side effects of nausea,

vertigo, fall in blood pressure and itching and are generally harmless. Older

users should be especially informed of the possible occurrence of vertigo and

fall in blood pressure. People that have skin injuries, such as blisters or

wounds on the soles of their feet are not allowed to use the vibration plate.

Safety notices

2.3 Instructions pertaining to a risk of

damage to the machine

CAUTION!

Danger of overheating by obstruction of the air routing!

– Do not change, obstruct or block the air inflow and

outflow area to the device or make any unauthorized

changes to the device. The manufacturer shall bear no

liability for damage or injuries resulting from such ac-

tions.

Information for the studio operato

02/2012 1010978-01 Operating instructions – 11

3 Information for the studio operator

3.1 Intended use

Beauty device

This device is intended to temporarily firm and tone the appearance of the

muscles and the body.

The device may only be used by one person at a time.

VibraShape function

The vibration plate can be used additionally during the light application. The

vibration plate is used for muscle stimulation of healthy people.

The vibration plate is not intended for medical applications!

Any other use shall be considered improper. The manufacturer cannot be

held liable for damage or injuries resulting from misuse. The operator bears

the sole risk for this.

The proper use also includes compliance with the manufacturer's instructions,

operating and maintenance conditions. This device may only be operated,

maintained and repaired by persons familiar with these tasks and who are

aware of the dangers involved.

3.2 Foreseeable misuse

The following uses of the device are explicitly prohibited:

y Multiple people may not use the device at the same time.

y People with body weight of more than 330 lb may not use the device.

y Extending the specified application times cannot place excessive de-

mands on the skin due to the emitted light. However we recommend a

24 hour break after a 12 minute treatment.

y When the device is in use no other people may remain in the room. This

includes both children and adults.

3.3 Obligations of the studio operator

y As the operator you are responsible for informing users on possible risks

of light applications.

y All danger and safety labels attached to the device must be observed! Do

not remove them!

y No safety equipment (e.g. panel switch) may be removed, deactivated, or

otherwise bypassed as it can impair the safe operation of the device!

y The device may only be used when in completely operational condition!

y It is the operator's responsibility to ensure the device is handled properly.

Information for the studio operator

3.4 Staff training

As the operator you are obligated to train your personnel and instruct them in

the established legal and accident prevention regulations. Ensure that your

staff have understood and observe these instructions. This includes:

y information regarding intended use and foreseeable misuse

y safety instructions

y operating instructions

y cleaning and maintenance instructions

– Please make the instructions and additional information from the manu-

facturer available to the staff at their workplace.

– Regularly check your staff's safety consciousness and awareness of the

risks, taking into account your operating instructions.

– Please ensure that the cleaning intervals are complied with, in particular

cleaning after every use.

– Please ensure that your staff provide your customers with appropriate

advice, in particular regarding application times, possible risks and the

operation of the device.

3.5 Installation location

3.5.1 Ventilation

CAUTION!

Danger of failure!

Danger of overheating by obstruction of the air routing.

– Observe the ventilation information in the Planning

Manual to avoid serious system malfunctions.

Data for air supply and extraction planning can be found in the Planning Man-

ual (Order no. 801482-.., http://support.jkamerica.com). You can also ask for

this data from your sales agent or customer service (see Page 2).

3.6 Export

This device is exclusively intended for use in the USA and Canada and may

not be exported to other countries and operated there! The manufacturer

assumes no liability whatsoever in the event of non-compliance. High liability

risks may occur for the exporter and/or the operator in the event of noncom-

pliance.

Information for the studio operato

02/2012 1010978-01 Operating instructions – 13

3.7 MP3 music

The personal use of an MP3 player during the application is not a public

broadcast in copyright terms, so that there is no obligation for registration or

payment by the studio owner to the corresponding copyright owning com-

pany. Copyright laws apply to the owner of the MP3 player.

The same regulations apply for the official use of MP3 music files as for other

music sources: As studio owner you are only allowed to use original audio

obtained from legal sources. Proof of the legitimacy of any MP3 audio used

should be available for viewing upon demand of any regulatory body. Please

refer to http://www.riaa.com for more information.

3.8 Disposal

3.8.1 Environmental regulations –

disposal of lamps

Beauty Light lamps contain fluorescent materials and other waste containing

mercury.

According to the national waste disposal laws and in accordance with the

municipal waste regulations, proof must be provided of the proper disposal of

lamps.

Contact your local environmental agency for assistance with the disposal of

lamps.

3.9 Instruction signs on the device

See Appendix page 44.

3.10 Technical modifications

The device has been constructed in accordance with current safety regula-

tions. The illustrations and specifications on these instructions are subject to

technical modifications which are required in order to improve the device.

Unauthorized modifications and changes to the device and its control unit are

prohibited.

Use only OEM spare parts.

Description

4 Description

4.1 Scope of delivery

y BEAUTY ANGEL RVT 28 device

y Beauty Light lamps

y VibraShape

y Fan (Body cooling)

y Trim, including loudspeaker and cockpit control

y Interior lighting

y Sound system

y MP3 cable

y Allen-key

y Connecting lead

y Suction cup for acrylic panels

y Protective goggles

y Technical documentation (folder with instructions, CD-ROM and addi-

tional documentation)

4.1.1 Optional

y Central air outlet system

4.2 Equipment

Device equipment varies depending on the model.

In this description, all standard and optional components/functions are taken

into account which must be observed during operation and/or when perform-

ing maintenance.

The control panel also differs according to the varying equipment:

Only those buttons that are visible can be operated, i.e. the corresponding

function must be included in the device's equipment.

Description

02/2012 1010978-01 Operating instructions – 15

4.3 Device description

1. Base plate

2. Floor mat and vibration plate (VibraShape)

3. Operating panel

4. Holding bars

5. Headphone connection, jack plug Ø 6.3 mm

6. MP3 connection, jack plug Ø 3.5 mm

7. Fan (body cooling)

8. Loudspeaker

9. Beauty Light lamps

10. Clamping strips (acrylic panels)

11. Interior lighting

12. Exhaust air (equipment cooling)

13. Supply air (body cooling)

14. Height-adjustable feet

Description

4.4 Accessories (optional)

1. Central air outlet system

4.5 VibraShape

You may choose from four (4) different programs, each offering varying levels

of targeted muscle stimulation, exercise and massage intensity. The body

immediately responds to the patented, pre-programmed movement of the

platform. Muscles automatically flex and relax as the VibraShape technology

stimulates muscle activity.

Users can combine the light treatment and the vibration program as desired.

NOTE:

Voice Guide technology walks the customer through the

available options and informs the user of changes in inten-

sity throughout the session.

Description

02/2012 1010978-01 Operating instructions – 17

4.6 Description: vibration programs

Program

Duration Description

10 Minutes Wellness (low intensity): Loosens and relaxes mus-

cles, improves flexibility, and enhances well-being

with gentle movements at low vibration frequency.

10 Minutes New You: For beginners and ideal for those starting a

fitness regimen. Utilizes medium frequency vibration

and massage therapy technology. Improves muscle

tone gradually with controlled, alternating movements.

10 Minutes Cross-Training: Intense vibration therapy uses high

frequency interval training. A balanced program that

strengthens muscles with powerful movements. Im-

proves muscle tone with controlled, alternating

movements.

10 Minutes Multi-Level: Mixed frequency cycles target muscle

groups in the legs, buttocks and abdomen to help

temporarily improve skin’s appearance as it tones and

tightens muscles.

Operation

5 Operation

5.1 Mandatory reading

Always read and follow all instructions for proper usage prior to allowing any-

one to use the device. The operating instructions included with this device

must always be followed to prevent possible injuries.

Inform users

– to use provided protective eyewear whenever the equipment is ener-

gized.

– to follow the application times.

A beauty device is not a toy. You cannot vary the strength of the lamps in

your unit.

Should you have any questions regarding the proper use of your device, con-

tact Global Service USA at:

800-445-0624

Mon - Fri. 8:00 a.m. to 7:00 p.m. (CT)

Sat. 8:00 a.m. to 3:00 p.m. (CT)

WARNING!

Danger of skin injuries!

– The device must never be used when the timer is de-

fective!

NOTE:

When describing the operation, the device is sometimes

shown with the doors open. During the application the doors

must always be closed.

Proper operation is not possible with the doors open.

Operation

02/2012 1010978-01 Operating instructions – 19

5.2 Application tips

Behavior before, during and after a light application:

y No other persons are permitted in the vicinity of the cabin when using the

device, this especially applies to children.

y Remove all jewelry (including piercings) prior to the application.

y Remove cosmetics before using the device and do not use sun screen

products.

y A light application is not damaging to the eyes. However, we neverthe-

less recommend wearing eye protection during the application in order to

protect the eyes against the bright light.

y Always comply with the recommended application times.

Collagen device

– Stand up straight during the application and in the center of the device.

CAUTION!

Holding bars break when exposed to severe strain!

The holding bars can be broken off if they are exposed to

severe strain.

– Do not attempt pull-ups or other exercises.

Operation

VibraShape

WARNING!

Risk of injury!

The vibration function is not suitable for all users.

– Please observe the contraindications on page 8.

NOTE:

Each program starts with a warm-up phase and ends with a

cooling-down phase. A vibration program normally lasts for

10 minutes. The vibration program will terminate with light

application if an application time of less than 10 minutes has

been entered.

– Place your feet on the footmarks (1).

– Do not press your knees together (2).

– You can hold onto the handles to make you feel safer if you want (3).

– Select Program 1 as the first application in order to test the program and

ensure you have no adverse reactions (4).

– Press the START/STOP button (5) to stop the vibration plate if you think

that it is causing discomfort or vertigo.

Page is loading ...

BEAUTY ANGEL RVT 28 Operating Instructions Manual

Brand: BEAUTY ANGEL

Model: RVT 28

Type: Operating Instructions Manual

This manual is also suitable for

BARVT28

Download PDF

report

BEAUTY ANGEL RVT 28 Operating Instructions Manual

This manual is also suitable for

BEAUTY ANGEL RVT 28 Operating Instructions Manual

Other documents