Baker MM2 User manual

Brand
Baker
Model
MM2
Type
User manual
Model
MM2
Max/Min
Thermometer
Instruction Manual
ITM.com/Baker
GlobalTestSupply.com/Baker
BAKER
INSTRUMENTS
YEAR
WARRANTY
1
1
GARANTIE
D’UN AN
1
1
w ww . . co m
information@itm.com1.800.561.8187
2
BAKER
INSTRUMENTS
ITM.com/Baker
GlobalTestSupply.com/Baker
Features
• Mercury lled
• Temperature range: -40°C to 50°C (-40°F to 122°F)
• Dimensions: 22.8 cm (9”)
A Max/Min thermometer records highest and lowest temperatures. A
“U” shaped tube holds mercury. As the temperature increases, the liquid
expands, forcing the mercury up the maximum scale. When the tem-
perature falls, the liquid contracts, and the mercury follows it back up the
minimum scale. Two blue markers record changes in temperature.
Instructions
The markers are held in position by a magnet in the back of the case.
The Max/Min temperatures are read at the bottom point of the markers.
The current temperature can be read at the top of each mercury column.
Note: The minimum scale is inverted with the lower temperatures above
the high ones. Press the center button to reset the Max/Min readings.
Bubbles in the capillary will disappear if the thermometer is put on a
heater.
Should the mercury column separate, the thermometer must be shaken
to unite the mercury. If one of the blue Max/Min markers disappear, press
the button during the shaking process, and it will appear again.
Do not mount or place the thermometer in direct sunlight.
Warning: This product contains mercury and should be disposed of
properly in accordance with applicable federal and provincial laws.
For service, repairs or calibration as well as product info on this or any other
Baker product, contact Baker Instruments.
w ww . . co m
information@itm.com1.800.561.8187
  • Page 1 1
  • Page 2 2

Baker MM2 User manual

Brand
Baker
Model
MM2
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents