Haier L30CV6-A1 is a 30" TFT-LCD TV with high brightness and contrast, NICAM/A2 stereo sound, and a variety of features to enhance your viewing experience. Enjoy quick view and mute functions, choose from a variety of picture formats, and adjust the sound to your liking. Connect external audio and video devices, or use the TV as a monitor for your PC. Easily set the timer, freeze the picture, or access teletext functions.
Haier L30CV6-A1 is a 30" TFT-LCD TV with high brightness and contrast, NICAM/A2 stereo sound, and a variety of features to enhance your viewing experience. Enjoy quick view and mute functions, choose from a variety of picture formats, and adjust the sound to your liking. Connect external audio and video devices, or use the TV as a monitor for your PC. Easily set the timer, freeze the picture, or access teletext functions.
Owner s Manual
TFT-LCD COLOUR TV
L30CV6-A1
Please read this manual carefully before
using your television and keep this manual
in a good place for future reference.
30 TFT-LCD TV High Brightness & Contrast NICAM/A2 Stereo Sound
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence
shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
of uninsulated magnitude to constitute a risk of electric
General Precaution..............................................................................................2
Position of keys and plug-ins...............................................................................4
Front panel........................................................................................................4
Back cover interface..........................................................................................4
Function of remote controller...............................................................................5
Precaution for the remote control and the screen...............................................6
Basic operation....................................................................................................7
Switching your television on and off..................................................................7
Programs selecting and volume adjusting.........................................................7
Quick view function............................................................................................7
Mute function.....................................................................................................7
Choosing the language of the display on the screen.........................................7
Menu sections......................................................................................................8
Programs setting up.............................................................................................9
ing...........................................................................................9
...............................................................................................9
................................................................................................10
Skip the channel ...............................................................................................10
........................................................................................11
Adjusting the picture............................................................................................11
Adjusting the picture settings.............................................................................11
Adjusting the sound.............................................................................................12
...........................................................................................12
TV set up.............................................................................................................13
...............................................................................................13
Signal source setting.........................................................................................13
Changing the picture standard..........................................................................13
Others.................................................................................................................14
Setting the timer................................................................................................14
Auto adjusting function......................................................................................14
Picture still function...........................................................................................14
Teletext function................................................................................................15
External audio and video device connections...................................................17
Connected to PC as a monitor..........................................................................18
Specifications.....................................................................................................19
Troubleshooting guide........................................................................................20
Automatic search
Manual searching
Manual fine tune
Selecting the picture formate.............................................................................12
Adjusting the sound
OSD tune setting
Sound System Select
CONTENTS
The unit should not be placed in a built-in installation
such as a book-case, limited space rack unless proper
ventilation is provided.
- This may cause fire by overheating or damage the
unit by falling.
Do not use the unit in direct sunlight and keep
it away from heaters, stoves, and other sources
of heat.
- This may cause a fire.
During storm conditions (especially when there
is lighting) unplug your TV set from the main
electrical outlet and antenna.
Do not connect too many extension cords or
plugs to an outlet.
- This may cause a fire.
Do not attempt to service the unit. Contact an
authorized dealer or repair service.
- Servicing the unit yourself may cause an
electric shock or fire.
General Precautions
Do not use the unit near water, oil or inflammables.
- This may cause a fire.
Do not use a damaged plug and do not let the
power cord touch a heat source.
- This may cause an electric shock or fire.
Place the unit on a flat and stable surface.
- The unit can cause injury or damage the unit by falling.
Keep the power adapter away from any heat source.
- This may cause a fire.
If there are any unusual sounds or smells coming
from the unit, unplug it immediately and contact
an authorized dealer or repair service.
Do not use or store inflammable substances
near the unit
- This may cause an explosion or fire.
Place the unit away from the wall for well ventilation.
- This may cause a fire.
Place the antenna away from the electric wire,
not to touch even though it falls down by wind.
- This may cause an electric shock.
Do not touch the plug with wet hands.
- This may cause an electric shock.
Be sure to plug in tightly and hold the plug,not the
cord when disconnecting the plug from the wall outlet.
- This may cause a fire.
If an outside antenna is connected to the unit, do not let
the rain water get into the unit by bending or antenna wire
sealing
- This may cause an electric shock or fire.
Unplug the unit from the wall outlet before cleaning.
Use a smooth cloth. Do not use industrial chemicals.
- This may cause an electric shock or fire.
If the connector between the plug and the pin is dusty or
dirty, clean it. Do not spray detergent directly on the unit.
- This may cause an electric shock or fire.
Do not touch the antenna wire and disconnect the
plug from the electrical outlet during storms or lightening.
- This may cause an electric shock or fire.
Disconnect the plug from the outlet if it is not
used for a long period of time.
- This may cause an electric shock or fire.
General Precautions continued
Function Of Remote Controller
Buttons and Descriptions
PC input button
switch the signal source to PC
DC power standby button
switch on or standby
Picture still button
Input source switch button
Auto adjustment button(PC status only)
Information display button
Sleep time button
Mute button
Digital button
Quick view button /hold function(text)
Picture Mode Button/size function(text0
I/II A2 and NICAM button
Disappear menu button
Used as the left/right buttons in the OSD
menu screen;used for the adjustment of
volume when the OSD menu is not shown
on the screen.
Used as the up/down buttons in the OSD
menu screen; used for the adjustment of
channel when the OSD menu is not shown
on the screen.
Menu button and used to confirm an action
Channel back and forward buttons
Volume up and down buttons
(The teletext function buttons,refer to
the TELETEXT Application)
Note: The figure of the remote controller
is only for reference.
PC
CH
STILL
INPUT
POWER
AUTO CLOCK
MUTE
DISPLAY
EXIT
MENU
VOL
TEXT
?
INDEX TIME
SUBTITLE
MIX
Q.VIEW/HOLD
PIC/SIZE
I/II
Preparation For The Remote Control And The Screen
1 Remove the cover of battery
compartment as shown in the figure
Cautions:
1 Ensure that there is no obstacle
to signals from the remote controller
to the receiving sensor of the
television set.
2 Keep the remote controller away
from heat source or high moisture
and avoid impacts to the remote
controller.
3 Do not operate the remote
controller directly in floodlight
or strong sunlight.
2 Properly load one 1.5V Alkaline
battery(AA) 2
in the compartment
of the remote controller.
Do not mix new and used
batteries.
3 Replace the cover of the battery
compartment.
Do not recharge the
batteries.
TV game/PC
If the TV set is used for playing TV games or PC for a long time, permanent shadows will
appear on the screen. Please follow instructions below to avoid such retrieval damages
to the LCD screen.
---Set the brightness and contrast to a lower level;
---Please avoid display a static image on the screen, otherwise a permanent afterimage
will appear on the LCD screen.
---static image, including sign, video game, computer image, teletext, and 4:3 picture
mode;
---The damages of the LCD screen panel below don't belong to the operation bugs,
therefore they are not included within the guarantee;
Caring of the TV cover and the LCD screen panel:
Unplug the power cable from the outlet on the wall, use a soft cloth moistened with
neutral detergent to clean the cover and the screen.
Don't use benzene, alcohol-based or gasoline to clean the TV.
NOTE:
If the environment temperature is much low, the picture will reach the
normal brightness after a period of time. It is not the trouble of the TV (the picture will
reach a normal brightness after a while).
There might be separate brightness or scotomas on the screen, or there might be some
blue, green or red dots which are dead pixels. These won't affect the LCD screen.
Switching Your Television On And Off
NOTE: If the set is on state, press the Power button, the set
can switch into the standby state.
Standby set plug the lead into an appropriate socket,
then press the Power Switch button on the back ,and the
red power indicator will light.
1 If the TV is in the state of standby,press the Power key
on the remote control or on the back panel of the set,then
you can switch standby to on state.
2 Press the Power button again to get into the standby state.
Press CH / buttons or direct-digit button to select the
program which you favorite.
Programs Selecting And Volume Adjusting
Press VOL / keys to adust the volume .
Press the Q.VIEW/HOLD key to go back to the channel you
viewed.
Quick View Function
Mute Function
1 press MUTE button, a sign will appear of the screen, and
the sound of the set is cut off.
2 In order to recover the sound, press the MUTE button or
VOL / buttons.
Choosing The Language Of The Display On The Screen
Display the sub menu and select the language item.
1 Press the MENU button to select the Setup sub menu.
Language English
Off
3 Press buttons to select the language.
2 Press buttons to select the Language item.
PC STILL INPUT POWER
AUTO
CLOCK
MUTE
DISPLAY
CH
VOL
Tint
50
Manual Fine Tune
3 Press buttons repeatedly to start fine-tune
until the picture and the sound becomes satisfactory.
And press EXIT button to disappear the menu.
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to fine-tune
the channel manually.
Manual Store
ATM
Fine Tune
Add/Erase Off
Sound System D/K
1 Press MENU button repeatedly to select Ch.
2 Press buttons to select Fine Tune.
5 Press EXIT key disappear the menu.
Skip The Channel Which You Don't Want
1 Press buttons or direct-digit choosing
button to select a channel you want to skip.
2 Press MENU button continuously to select Ch
3 Press buttons to select Add/Erase.
4 Press buttons to switch it On.
When you select channels with button, this channel
will be skipped, However, you can also use the Direct-digit
Choosing button on the remote control to select this channel
directly.
Note recover the skipped channel
1 Use Direct-Digit Choosing button to select the number of the
channel to be recovered.
2 Press MENU button to select Ch.
3 Press button to select Add/Erase and press
to switch into Off.
<V->/<V+> key to change
Tint
50
The information provided on this page is useful if you find
that some channels have not been stored during the initial
set-up process.
There are some different signal sources in this set, and
you may select the signal source that show up as the following
sequence:
2 Press button to select Source item.
Signal Source Setting
1 Press MENU button repeatedly to select Setup menu.
3 Press button to select the signal source that you
want.
Changing The Picture Size
There are some different signal size in this set, and
you may select the size that show up as the following
sequence: Fill Screen 4:3 Wide Cinema Sub Title.
1 Press MENU button to selectSetup menu.
3 Press button to select the size that you want.
2 Press button to select Size.
4 Alaso you can select the required signal source by
simply pressing theINPUT or the PC/TV button on the remote
control.
Language English
Source TV
Osd Tone Off
Size Fill Screen
Language English
Source TV
Osd Tone Off
Size Fill Screen
NOTE: In the sub menu, the Source may show up as in the following
sequence:
TV AV SCART AV S-Video SCART RGB YCbCr YPbPr DVI PC
Setting The Timer
NOTE Press CLOCK button on the remote control If the sleep
timer is set on ,the screen will display. To cancel the sleep
timer function, press the CLOCK button repeatedly and select
0.
PC STILL
INPUT POWER
AUTO
CLOCK
MUTE
DISPLAY
Using this function. The TV set can be changed into the
standby status after a period of preset time from when
this function is activated.
Press CLOCK button to enter the sub menu then press
button repeatedly and cycle through the preset time
intervals( 0-10-...-180-240 minutes), press MENU button to
active the function
PC STILL
INPUT
POWER
AUTO
CLOCK
MUTE
DISPLAY
Auto Adjusting Function
Press the AUTO button on the remote control to start auto
adjusting the display .
PC
STILL INPUT POWER
AUTO
CLOCK
MUTE
DISPLAY
Picture Still Function
Press the STILL button to freeze(or suspend) the current
screen. you may press the STILL button or any other key
again to continue the playing.
NOTE this functiong is only available in PC mode.
NOTE This function is not available in PC DVI YPbPr
mode.
TELETEXT FUNCTIONS
Teletext is an information system, broadcast by certain channels,
which can be read like a newspaper . It also provides subtitles for
people with hearing difficulties or those who are unfamiliar with the
language in which a particular programme is being broadcast (cable
networks, satellite channels, etc.).
You can press TEXT button into TEXT mode, press again to leave TEXT
mode. All menu related functions are notavailable in TEXT mode. Only a
few direct button control functions are available in TEXT mode, they are:
1 Page up/down
Result:
Use the PRO+/- buttons to browse next or previous page.
2 Page number entering
Result:
To select a teletext page either directly enter the page number
using the numeric button pad on the remote control or use the
PRO+/- buttons, or the coloured Fast Text buttons.
TELETEXT FUNCTIONS
MIX
While in Teletext mode press the MIX button will show the teletext data
superimposed on top of the TV picture. Press the MIX button again to revert
back to Full text.
HOLD
Q.VIEW/HOLDPressing the button will stop the teletext page automatically
updating. This feature is very useful where there are several teletext pages
or data on the same page number.
Fast text coloured buttons
Fast text automatically displays the four most commonly used pages that the
broadcaster thinks that you may want to choose next. Press the same
coloured button on the remote control as the coloured link at the bottom of
the teletext page to go directly to that page.
SIZE
PIC/SIZEPressing the button to change from different screen display size.
This feature is very useful as it magnifies the image making the characters
easier to read.
REVEAL
Pressing the button will reveal hidden text. This feature is used to reveal
information such as answers to Teletext on-line interactive puzzles.
TIME
By entering its 4-digit number to enter a secondary page;While in normal TV
mode only, pressing the button TIME will display the teletext time in the top
right corner for a few seconds.
TEXT
Press the TEXT button on the remote control to turn teletext On/Off.
SUBTITLE
SUBTITLEPressing the button will get the teletext decoder to automatically
search for the subtitle page. In NZ the subtitle is usually page 801.
INDEX
Press the INDEX button to show the list of teletext contents
Some external signal sources, such as VCR, video camera or PC,
can be linked to the television.
A/V INPUT
1 Connect the audio output terminal of VCD.
to the AUDIO-IN input terminal of LCD TV;
2 Press button to select multi audio mode;
3 Press PLAY button of the VCD and begin to watch.
INPUT
If we select the S-VIDEO as the signal input terminal
,the picture effect would be better than the (A/V) video input
terminal.
1 Connect the S-VIDEO input terminal of DVD to the
S-VIDEO input terminal of TV
2 Connect the left/right audio output terminal of DVD to
the corresponding terminal
3 Press button repeatedly till you get
4 Press the PLAY button on the DVD player ,and the TV would play
the program of the DVD disk.
INPUT S-VIDEO
S-VIDEO INPUT
AUDIO IN
L
R
S-VIDEO
IN
VIDEO IN
AUDIO IN
L
R
S-VIDEO
IN
VIDEO IN
DTV INPUT
1 The chromatism(Y/PbCb/PrCr) terminal connect the
chromatism output terminal of the picture output equipment
such as the DVD,HDTV.and the audio may transfers
through the AUDIO IN terminal.
2 Press the button to select YCbCr mode or the
YPbPr mode
3 Press the PLAY button on the equipment to watch the TV.
INPUT
L
R
AUDIO IN
Y Cb/Pb Cr/Pr
Headphone port
Plug the headphone in the television headphone port, then the
television program sound will be heard from the headphone, not
by the television speaker. Press VOL+/- buttons to increase or
decrease the sound volume. No sound will be heard if MUTE button
is pressed.
POWER ANT.
PC-
AUDIO IN
HEADPHONE
AUDIO IN
L
R
L
R
SCART
S-VIDEO
IN
AUDIO IN
Y Cb/Pb Cr/Pr
VIDEO IN
EXTERNAL AUDIO AND VIDEO DEVICE CONNECTIONS
ANTENNA INPUT
Connect the CATV or antenna to the
ANT input terminal of TFT-LCD;
NOTE: For better effect of the signal, it is recommended
that you use an outdoor aerial or coaxial cable.
Laser DVD with output terminal
Laser DVD with output terminal
Laser DVD with output terminal
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Haier L30CV6-A1 is a 30" TFT-LCD TV with high brightness and contrast, NICAM/A2 stereo sound, and a variety of features to enhance your viewing experience. Enjoy quick view and mute functions, choose from a variety of picture formats, and adjust the sound to your liking. Connect external audio and video devices, or use the TV as a monitor for your PC. Easily set the timer, freeze the picture, or access teletext functions.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Hitachi 26LD8000TA User manual
-
Technika 42-2020 User manual
-
Sanyo CE26LD47-B User manual
-
Bush LCD40883F1080P User manual
-
-
TEAC LCDV3253HD User manual
-
-
Logik L32LW783 User manual
-
ERAE Electronics Industry 32 LCD TV none User manual
-
