Lenoxx CRV90 User manual

Category
Alarm clocks
Type
User manual

Lenoxx CRV90 is a versatile clock radio that combines traditional timekeeping with a range of features for waking up, listening to the radio, and setting alarms. With its user-friendly controls, you can easily set multiple alarms, choose to wake up to the radio, buzzer, or vibration, and adjust the volume and brightness to your preference. The CRV90 also allows you to store up to 10 preset radio stations for quick and easy access to your favorite channels.

Lenoxx CRV90 is a versatile clock radio that combines traditional timekeeping with a range of features for waking up, listening to the radio, and setting alarms. With its user-friendly controls, you can easily set multiple alarms, choose to wake up to the radio, buzzer, or vibration, and adjust the volume and brightness to your preference. The CRV90 also allows you to store up to 10 preset radio stations for quick and easy access to your favorite channels.

CRV90
Instrucon Manual
Radio
1. Press the “ON/O FF” buon to turn the clock radio on or off.
2. Press the “MO DE” buon to select radio band.
3. Adjust the “RAD IO +” or “R AD IO -“ to select the desired staon.
4. Press the “VOL +” or “VOL -“ buon to adjust the volume.
5. Press the “STORE / REC AL L” buon to store your desired staon. The display will show the “P01
means your staon will be saved on the first pre-set. If it displays “P02” this means the staon is
saved in the second pre-set.
6. To store the tuned staon, press and hold the "STORE / REC AL L" buon unl the display shows
ashing “P01”. Under this condion short press to confirm staon to store in this memory locaon.
P01” will stop to flash to feedback staon is stored. Tuned another staon and long press "STOR E /
REC AL L" buon unl the display shows "P02" flashing then short press to confirm. Repeat this
procedure unl 10 memories are stored.
Please note you can only recall the preset staon unl you save all 10 staons.
Seng the Alarm
1. You must switch off the radio before you set the alarm me.
2. Press and hold the “ALAR M ” buon unl the Hour display begins to blink.
3. Now you can select to wake up by radio or buzzer or vibrator. The LE D with bell logo stands for wake
up to buzzer or vibrator. The LED with music note logo stands for wake up to radio. Press “AL ARM ”
buon to select different wake up modes.
4. You can set the alarm me, aer you select the wake up mode. Press the “Hour ” to adjust the hour
and press “Minute” buon to adjust the Minute.
5. Press the “ALA RM ” buon now to fix the alarm me.
6. Remember plug in the “Vibrator Pad” at the rear of the product if you select wake up mode is Wake
by Vibrator.
Canceling the Daily Alarm
Press the “ALARM ” buon to stop the alarm. The alarm will operate 24 hours later as per alarm Time
set.
Cancelling the AlarmPress the “ALARM ” buons , the display will show “O FF” and all wake up mode
icons will also switch display off. The alarm seng is cancelled now.
Seng the Clock
1. You must switch off the radio before you set the clock me.
2. Press and hold the “T IM E” buon unl the display begins to blink, then release the buon.
3.Press the Hour and Minute buon to adjust the hour and minute.
The PM indicator will light when the hour is set in the PM.
4. Press the “TIME ” buon to save me .
Seng the Sleep Time
1. You must switch off the radio before you set the sleep me.
2. Press the Sleep buon repeatedly to set the sleep me ( 90, 80, 70, 60, 50, 40, 30, 20, 10 min or OFF ).
Snooze and Alarm Reset
To use the snooze, press the SNO OZE bar when the alarm is sounding. The alarm will stop temporarily,
but will resume sounding aer 9 minutes.
NOT ES
1. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on apparatus.
2. To be completely disconnect the power input, the mains plug of apparatus shall be disconnected
from the mains. As the disconnect devices is the mains plug of apparatus.
3. The mains plug of apparatus should not be obstructed O R should be easily accessed during
intended use.
4. Baery shall not be exposed to excessive heat such as sunshine, fire or the like.
5. Minimum distances 10cm around the apparatus for sucient venlaons.
6. The venlaon should not be impeded by covering the venlaon openings with items such as
newsapaper, table-cloths, curtains etc.
7. No naked flame sources such as lighted candles should be placed on the apparatus.
8. Aenon should be drawn to the environmental aspects of baery disposal.
9. The use of apparatus in moderate climates.
SP ECI FI CAT IONS
Frequency Range: F M 88 –108 MHz
Power Source: AC100-240V ~ 50 Hz, 5W
Baery Back Up: 2 X A AA size baeries (not included)
10. PM INDICATOR
11. AL BUZZER INDIC ATOR
12. AL RADIO I ND ICATOR
13. VIBRATOR INDIC ATOR
14. SLEEP F UNCTION I NDICATOR
15. SPEAK ER
16. VIBRATOR SOCKE T
17. AC/DC S OC KE T
18. BAT TE RY COM PARTMENT
Lenoxx Electronics Aust Pty Ltd
www.lenoxx.com.au
Customer Service: 1300 666 848
1. RADIO O N/OF F
2. STOR E/RE CA LL & TI ME
3. SNOOZE & B RI GH TNESS
4. MIN/RA DIO+
5. MODE
6. HOUR/R ADIO-
7. SLEEP
8. VOL+
9. VOL-/AL
  • Page 1 1

Lenoxx CRV90 User manual

Category
Alarm clocks
Type
User manual

Lenoxx CRV90 is a versatile clock radio that combines traditional timekeeping with a range of features for waking up, listening to the radio, and setting alarms. With its user-friendly controls, you can easily set multiple alarms, choose to wake up to the radio, buzzer, or vibration, and adjust the volume and brightness to your preference. The CRV90 also allows you to store up to 10 preset radio stations for quick and easy access to your favorite channels.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI