ISSUED:10-25-01 SHEET#: 081-9024-1
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 1
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Installation and Assembly - Self Leveling VCR Hanger
Model: ACC 906
Description
AA jumbo vcr tilt mount
BB vcr tilt mounting plate
CC M5 x .8 x 8mm socket pin screw
DD 1/4 washer
EE 1/4 lock washer
FF 4mm security tool
Parts List
Qty.
1
1
10
2
2
1
Part Number
081-1046
081-1047
520-1062
540-9444
540-9402
560-9646
Note: Actual parts may appear slightly different than illustrated.
AA
Before you start check the parts list below to make sure all of the parts shown are included.
© 2001 Peerless Industries, Inc. All rights reserved.
Peerless is a trademark of Peerless Industries, Inc.
BB
CC
The hanger bracket will be used in place of what was
supplied with the VCR mount. The TV does not have
to be removed for you to install your VCR mount.
Attach (AA) to tray using four screws (CC). Attach (BB)
to VCR bracket using four screws (CC). Attach (BB) to
(AA) using two sets of (CC, EE & DD). Tighten all
fasteners with security tool (FF).
EE
DD
CC
DD
EE
CC
CC
AA
BB
VCR
BRACKET
FF
TRAY
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Peerless Industries PM 27 User manual
-
-
-
-
-
-
-
-
Peerless Industries PARAMOUNT PT660 User manual
-