fiodio 24H2G 24 Inch Gaming Monitor User manual

Brand: fiodio

Model: 24H2G 24 Inch Gaming Monitor

Type: User manual

The fiodio 24H2G 24 Inch Gaming Monitor is a high-performance display designed for an immersive gaming experience. With a refresh rate of up to 165Hz, you'll enjoy smooth, tear-free gameplay, while the 1ms response time ensures that your actions are reflected on the screen without delay. The monitor also features Adaptive-Sync technology, which synchronizes the refresh rate of the monitor with the frame rate of your graphics card, eliminating screen tearing and stuttering.





Notices-------------------------------------------------------------------------------------------------------------------------------------- 3

Product introduction -------------------------------------------------------------------------------------------------------------------

Packing list----------------------------------------------------------------------------------------------------------------------------

Instructions for use----------------------------------------------------------------------------------------------------------------------

Description of buttons------------------------------------------------------------------------------------------------------------

Explanation of indicators---------------------------------------------------------------------------------------------------------

Installation of base----------------------------------------------------------------------------------------------------------------------

Cable connection------------------------------------------------------------------------------------------------------------------------

Adjusting the monitor-------------------------------------------------------------------------------------------------------------

OSD menu---------------------------------------------------------------------------------------------------------------------------------

Menu description-------------------------------------------------------------------------------------------------------------------

Basic parameters------------------------------------------------------------------------------------------------------------------------

Note: The redundant screws are used as spare screws.

Notices Before using this product, please read this

User Manual carefully and keep it well

Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or

similar objects.

The range of the supply voltage of the monitor is printed on the label on the rear casing. If it is impossible to

determine the supply voltage, please consult the distributor or local power company.

Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and

swimming pools.

Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat

sources.

Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the

after-sales service directly.

Do not pull or twist the power cable forcedly.

may be damaged and the warranty will be invalid.

Make sure the monitor is placed on a at surface. lf the monitor falls down, it may cause human injury or

device damage.

lf the monitor will not be used for a long period, please cut o the power supply to avoid electric shock in

rainy days and damage due to abnormal supply voltage.

Please use a reliable earthing socket, do not overload the socket, or it may cause re or electric shock.

Do not put foreign matters into the monitor, or it may cause short circuits resulting re or electric shock.

There is a polarizer layer (not a protective lm) on the surface of the screen. Do not peel it o, or the product

Packing list

Product introduction

Please check that the package of the monitor contains all parts.

The color and shape of parts may vary with models. Figures in this User Manual are for reference only.

Wires supplied may vary with purchased products. Figures in this User Manual are for reference only.

Power Adapter User Manual

ScrewsDisplay screen BaseStand DP cable

Indicator light:

Steady blue light indicates the power

is on and the monitor runs normally.

Red light indicates no horizontal or

vertical synchronous signal detected

or no video input signal, and that the

monitor is in standby status. Please

make sure your computer is turned

on and operates normally and check

that all video cables are fully plugged

in and/or connected to the monitor.

Explanation of indicators

Indicator Light

Adjusting the monitor

Tilting angle

-5.0°(±2.0°)- +15°(±2.0°)

Instructions for use

Description of buttons

3 2 4 51

Power button: Turn on/of the monitor.

Exit/Left button: Exit or return to the previous menu/quickly switch the Input Signal.

Down button: Move down in the menu/quickly enter the GamePlus.

Menu button: Enter sub-menus/quickly enter the main menu.

Up button: Move up in the menu.

1. Unpack the carton, remove the foam, and lay the monitor at on the table.

Keep the foam under the monitor until you install the stand.

4. After assembly, simply hold the stand with hand to stand the monitor upright.

Note: During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid

damage to the screen.

Installation of base

2. Take out the bracket and place it on the machine shaft and x it with two screws.

3. Take out the base, align it with the bottom of the stand, and x it with two screws.

Screws

Do not press the LCD

Screws

Please connect the power adapter

plug to the corresponding power

port of the monitor, and connect

the other end to a properly grou-

nded power o utlet.

DC IN

AUDIO OUT

Use the HDMI cable to connect the

HDMI IN interface of the product to the

HDMI OUT interface of a PC.

Use the HDMI-DVI cable to connect the HDMI IN interface

of the product to the DVI OUT interface of a PC.

(In general, PCs do not transfer video signals to the

monitor through the DVI OUT interface, and it is necessary

to connect a loudspeaker box additionally to play sounds

of PCs.)

Connect audio outputting

devices such as earphones

to the AUDIO OUT interface.

HDMI interface

* Note: If the power cable or signal cable is damaged, you must replace it

* The bottom interface conguration at the back of the monitor varie with

products.

with special soft cables or special components purchased from the

manufacture or maintenance department.

Cable connection

DP interface

Use the DP cable to connect

the DP IN interface of the

product to the DP OUT

interfac of a PC.

Menu description

OSD menu

The color and shape of the OSD menu of the actual computer may be slightly dierent from them

shown in the gure.

Specications of the OSD menu may change with improvements of functions without prior notice.

Standard Mode

Game Settings

Picture Settings

Color Settings

OSD Settings

Other Settings

RTS/RPG Mode

FPS Arena Mode

MOBA Arena Mode

Adaptive-Sync

Shadow Balance

165hz

1920

1080

XOFF

The screen display (OSD) menu can be used to adjust settings of the monitor and is shown

on the screen after the monitor is powered on and the button is pressed.

1. Press one of the buttons ( ) to activate the browser screen.

2. Press or to scroll through the functions.

- Select the desired function, and press to enter the sub-menu.

- Press or to scroll through sub-menus, and press key to select and conﬁrm the

desired function.

- Press or to select one option, and press to conﬁrm settings and exit from the

current menu.

3. Press to exit from the menu screen.

Red/Green/Blue/Cyan/Magenta/Yellow:

0-100

Off/On: Red, Green, BlueUser1

Off/On: Red, Green, Blue

Hue

Saturation

User2

User3

Off/On

Off/Movie Mode/Reading Mode/Night Mode

/Care Eyes Mode

Off

Shadow Balance

Adaptive-Sync

Off/Normal/Fast/Ultrafast

On: TopRight/TopLeft/BottomRight

/BottomLeft

Off/Normal/Expert/Elaboration

Off/15:00/30:00/45:00/60:00

Position: TopRight/TopLeft/BottomRight

/BottomLeft

Off/Crosshair 1/Crosshair 2/Crosshair 3/

Crosshair 4/Crosshair 5/Crosshair 6

Game Settings

Standard Mode

RTS/RPG Mode

FPS Arena Mode

MOBA Arena Mode

Response Time

Refresh Rate

Game Crosshair

Game Time

Dynamic Brightness

MPRT

Ambient Lighting

Warm

Cool

Color Settings

Brightness 0-100

0-100

0-5

1.8/2.0/2.2/2.4/2.6/ S.curve

Wide Screen/16:9/Auto

Contrast

Low Blue Light

Sharpness

Gamma

Aspect Ratio

Picture Settings

DCR

Contextual Model

Functions of the monitor vary with models, and the functions in this manual are

for reference only.

Functions of the monitor vary with models, and the functions in this manual are

for reference only.

Auto/DP/HDMI

简体中文/English/한국어/ىبرع/Portugues Brazil/

Deutsch/Nederland/Suomi/Français/

Ελληνικά/Indonesia/Italiano/日本語/Malaysia/

Polskie/Português/Pусский/Español/ไทย/

Українська/Tiếng Việt/繁體中文/Türkçe

OSD Time Out 5-60

OSD H-Position 0-100

OSD V-Position 0-100

Volume, Mute

OSD Transparency 0-5

Hotkey1 Setting Brightness/Contrast/Volume/Mute

/Shadow Balance/Game Crosshair

/Refresh Rate/Game Time/Adaptive-Sync/

Contextual Model/Input Source/Splicing Screen/

Dynamic Brightness/Ambient Lighting

Hotkey2 Setting

Hotkey3 Setting

Off/On

Yes/No

Input Source:/Resolution:/Mode:

Audio

Splicing Screen

Auto Power

Eyeshield Remind

Reset

Information

Language

Input Signal

OSD Settings

Other Settings

Basic parameters

Product model 24H2G

Screen Size

Viewing Angle

23.8 inches

Pixel pitch

0.2739 (H) x 0.2739 (V) mm

Contrast ratio 3000:1(Typ)

16.7M

Colors

Aspect Ratio 16:9

Resolution 1920 x1080

542.4 × 403.8 × 160.9 mm

approx4.53 kg

Product Dimentions

Normal base

Without base

Action

Storage

542.4 × 334.5 × 38.5 mm

approx3.23kg

With base

Net Weight

Gross Weight

Tilting angle Forward titling: -5°±2° ; Backward tilting : 15°±2°

Rotation angle

Height angle

Pivot angle

Environmental

conditions

Temperature: 0°C~ 40°C (32°F ~ 104°F) Humidity: 10%~90% RH (non-condensing)

Temperature: -20°~ 60° (-4°F ~ 140°F) Humidity: 5%~95% RH (non-condensing)

The standard voltage and current may vary with countries, please refer to the

label at the back of the product.

Maximum refresh rate

Power specications

165Hz

Product Name Liquid Crystal Display

178°(H) / 178°(V)

DC 12V 3.0A

The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference,

(2)this device must accept any interference received,

(3)including interference that may cause undesired operation.

CAN ICES-3 (B)/NMB-3(B)

Made in China

[email protected]

潘巧纳

140*210mm

V01

备注:如不够页数，可以在封面封底的内面插入空白页

24H2G

说明书 Fiodio

Fiodio

2022.3.21

封面封底120G铜版纸过光膜，内页80G铜版纸, 单色印刷，胶装

所有文字、数字、英文字母、字符清晰可视、易读

且不易造成文字混淆 , 需提供使用材料的SGS和ROHS报告

提供过的供应商不需要再次提供

fiodio 24H2G 24 Inch Gaming Monitor User manual

Brand: fiodio

Model: 24H2G 24 Inch Gaming Monitor

Type: User manual

Download PDF

report