WARNING: Label part number 900599-01 must be applied by the installer to all chimney pipe sec-
tions but is not required on sections that will be visible after the installation is complete. Label must
wrap around the circumference of the pipe .
Figure 1 - Applying label 900599-01
WARNING
HOT
• Fire Risk
• Insulation and combustibles must not touch
pipe
• Consult manual for clearance requirements
• Ensure proper connection
WARNING
HOT
• Fire Risk
• Insulation and combustibles must not touch
pipe
• Consult manual for clearance requirements
• Ensure proper connection
WARNING
HOT
• Fire Risk
• Insulation and combustibles must not touch
pipe
• Consult manual for clearance requirements
• Ensure proper connection
INSTALLATION INSTRUCTIONS FOR
LABEL-UL127-50PK (F2659)
For more information, visit IHP.US.com
Printed in U.S.A. © 2015 IHP LLC
P/N 900601-00 Rev. N/C 09/2015.
P900601-00
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210
1. Apply label as shown in Figure 1. Note: Label must
wrap around the circumference of the pipe.