Bretford 6 Outlet Power Strip Assembly Guide

  • Hello! I've reviewed the assembly instructions for the BRETFORD Explorer ETCE6-SB Power Strip. This document provides a clear guide on how to assemble the power strip, detailing each component and step, from mounting to tightening with the wrench. I'm ready to answer any questions you have about these instructions or the device itself.
  • What is included with the E6 Power Strip?
    What are the first steps in assembling the E6 Power Strip?
    How do you install the bracket?
ExplorerTM TV Accessory E6 Power Strip
Assembly Instructions
Included:
1. Remove the wing nuts from the E6 and attach to the bracket as shown.
2. Install bracket at desired height using carriage bolts and nuts, then tighten with wrench.
Model: ETCE6-SB
031-11267
Rev .B
12.08.22
/