2. CEMC
  3. GS4227E GigaSpire Router

CEMC GS4227E GigaSpire Router User guide

  • Hello! I've reviewed the Cumberland Connect GigaSpire user guide. This document provides instructions on how to quickly set up the GigaSpire device, outlining steps for connecting it to your internet access device and power supply. It also notes how to know when the connection is successful. I'm ready to answer your questions about the device and the setup process.
  • How do I connect the GigaSpire to my internet access device?
    How long does it take for the GigaSpire to boot up?
    What does a solid green light indicate?
Need help?
Contact Technical Support: 1-800-987-2362 or [email protected]
Ethernet
Quick Start Guide:
Setting up your GigaSpire
Connect one end of the supplied Ethernet cable
to one of the LAN ports found on the back of the
Internet access device provided by your service
provider (e.g., modem or ONT) and the other end
of the cable to the WAN port on the back of
the GigaSpire.
Connect GigaSpire to
power outlet.
The solid green light indicates SUCCESS!
You are connected to the Internet.
Refer to the Quick Start Guide for the App to set up
your Wi-Fi.
60s 2m
1s
5s
4m
3s
Boot-up-time -
about 4 minutes
/