Sika 112718 Installation guide

Sika
Brand
Sika
Model
112718
Type
Installation guide

This manual is also suitable for

Sika 112718 is a versatile anchoring adhesive suitable for various projects, including anchoring bolts, dowels, railings, and pins. Its heavy-duty formula makes it ideal for demanding applications such as anchoring railings, deck supports, and pipes. The product's ease of use and quick curing time make it convenient for both professional contractors and DIY enthusiasts. Whether you're tackling home improvement projects or large-scale construction tasks, Sika 112718 provides a reliable and durable solution for your anchoring needs.

Sika 112718 is a versatile anchoring adhesive suitable for various projects, including anchoring bolts, dowels, railings, and pins. Its heavy-duty formula makes it ideal for demanding applications such as anchoring railings, deck supports, and pipes. The product's ease of use and quick curing time make it convenient for both professional contractors and DIY enthusiasts. Whether you're tackling home improvement projects or large-scale construction tasks, Sika 112718 provides a reliable and durable solution for your anchoring needs.

MATERIALS:
• Safety glasses and gloves • Utility knife • Cartridge of Sika AnchorFix®-1 or Sika® AnchorFix-2
• Standard caulk gun • Rotary hammer drill • Nylon brush
SITE PREP & PROCEDURE
1. Remember to always wear chemical resistant gloves and safety glasses at all times.
2. Drill a hole to the correct diameter and depth using a rotary hammer drill.
3. Clean the hole using a stiff nylon brush and blow out with compressed air (repeat process).
Make sure all particles, dust, and loose debris are all completely removed to ensure a proper bond.
4. Unscrew the cap on the Sika AnchorFix® cartridge. Pull the red plug and cut the plastic behind the
clip attached to the red plug. Next, attach the mixing nozzle over the cut plastic and insert the
cartridge into a standard caulk gun.
5. Squeeze the gun a few times to dispense the material through the nozzle. Discard the first part of
the dispensed material until a uniform gray color is achieved. If the hole is in hollow masonry, use a
perforated sleeve/screen.
6. Insert the mixer nozzle into the rear of the hole and start to squeeze the gun to dispense the
material. Withdraw the nozzle as the hole is slowly filled to prevent any air pockets.
7. Immediately insert the rod and/or bolt into the hole. This should be done slowly with a slight
twisting motion. Excess adhesive should be removed from the mouth of the hole before it sets.
8. Leave the rod/bolt undisturbed until the cure time has passed, then attach
the fixture and tighten necessary hardware.
9. Clean tools immediately with a solvent such as acetone, following the
manufacturer’s precautions. Cured material can only be removed mechanically.
Sika AnchorFix-1 For everyday anchoring projects (bolts, dowels, railings, pins, etc.)
Sika AnchorFix-2 For heavy duty anchoring projects (railings, deck supports, pipes, etc.)
usa.sika.com/retail y Refer to Product Data Sheet for more information.
ANCHORING ADHESIVES
Sika AnchorFix®- 1 & 2
HOW-TO GUIDE
  • Page 1 1

Sika 112718 Installation guide

Sika
Brand
Sika
Model
112718
Type
Installation guide
This manual is also suitable for

Sika 112718 is a versatile anchoring adhesive suitable for various projects, including anchoring bolts, dowels, railings, and pins. Its heavy-duty formula makes it ideal for demanding applications such as anchoring railings, deck supports, and pipes. The product's ease of use and quick curing time make it convenient for both professional contractors and DIY enthusiasts. Whether you're tackling home improvement projects or large-scale construction tasks, Sika 112718 provides a reliable and durable solution for your anchoring needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents