2. Noble House
  3. 5216

Noble House 5216 Installation guide

  • Hello, I'm a chat assistant and I've carefully reviewed the assembly instructions for the Sun Lounger. This document provides detailed steps for putting together your new lounger, including a parts list, assembly steps, and important safety information. I'm ready to address any specific questions you might have about the assembly process or the product itself!
  • How many adults are needed for assembly?
    Is the Sun Lounger suitable for children?
    What should I be careful about when using it?
Label Picture Description QTY
ABottom Supporting
Bar 2
BLeg 4
CBed Bar 2
DSide Supporting Bar 2
E
Canopy Supporting
Bar
1
F
Outdoor Mesh Bed
Fabric
1
GCanopy 1
HPillow 2
Wooden Sun Lounger
Caution : Do Not Swing on or in hammock. This could cause the product to tip
over resulting in possible injury.
This Lounger is NOT a TOY.
Keep your child / children at bay in the process of assembly.
Have at least 3 (three) adults on hand to help with assembling this Sun Lounge.
Noble House Home Furnishings LLC
1 OF 6
Label Picture Description QTY
①Bolt(M10×135MM) 8
②Bolt(M8×100MM) 20
③Bolt(M6×45MM) 2
④ Nut 9
⑤Washer 17
⑥Bolt Cap 21
⑦Wrench 2
⑧Handle 2
⑨Allen Wrench ( S4) 1
⑩
Bigger Allen Wrench
( S5)
2
Noble House Home Furnishings LLC
2 OF 6
Step 1
Attach Leg(B) to Bottom Supporting Bar(A) using Hardware(①,④,⑤) with
Wrench(⑦) and Handle(⑧). Repeat this process with the other Bottom Supporting Bar(A).
Do not fully tighten the bolts.
Step 2
Insert the two Bed Bar(C) into the two side pockets of Outdoor Mesh Bed Fabric(F).
Noble House Home Furnishings LLC
3 OF 6
Step 3
Attach Bed Bar(C) to the two Bottom Supporting Bars(A)using Hardware(②,⑥)with Bigger Allen
Wrench (⑩).
Do not fully tighten the bolts.
Step 4
Attach the two Canopy Side Supporting Bars(D) to the Bottom Supporting Bar(A)
using Hardware(②,⑥)with Bigger Allen Wrench (⑩).
Do not fully tighten the bolts.
Noble House Home Furnishings LLC
4 OF 6
Step 5
Insert the Canopy(G) into the two Canopy Side Supporting Bars(D).
Insert the Canopy Supporting Bar(E) into the canopy(G).
Step 6
Attach the Canopy Supporting Bar(E) to the Canopy Side Supporting Bar(D) using Bolt(③)with
Allen Wrench(⑨).
NOW,proceed to tighten ALL the bolts at ALL joints.
Noble House Home Furnishings LLC
5 OF 6
Place the two Pillows(H) on the bed.
Your Sun Lounge is ready for use.
Caution:Please be careful when getting on and off the Lounge.
Children must be supervised at all times when using the Lounge.
It is NOT recommended to get on this Sun Lounge from the FRONT or the BACK.
Step 7
Noble House Home Furnishings LLC
6 OF 6
/