Symmons 542TS Installation guide

Category
Faucets
Type
Installation guide

This manual is also suitable for

542TS, 542TSD
Degas® Tub Spout Series
Operation & Maintenance Manual
Model Numbers Specifications
542TS Degas Non-Diverter Tub Spout
542TSD Degas Diverter Tub Spout
8" diverter tub spout (542TS) and 8 1/8" non-diverter
tub spout (542TSD) made from brass materials plated in
standard polished chrome nish.
Modifications Warranty
-ORB Oil rubbed bronze
-STN Satin nickel finish
Note: Append appropriate -sufx to model number.
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Dimensions
Measurements
A Ø 2 1/2”, 64 mm
B 1/2”, 13 mm
C 8 1/8”, 206 mm
D 1/2”-14 NPT
E 8”, 203 mm
Required for Installation
Teon Tape
Note: Dimensions are subject to change without notice.
DD
C
C
B
B
AA
AA
EE D
D
B
B
542TSD
542TS
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. symmons.com [email protected] ZV-3044 REV A 080118
1) Install tub spout to stub out pipe. Turn clockwise to
secure.
Note: 542TSD only.
1) Diverter lever in down position for tub spout operation.
2) Diverter lever in up position for shower operation.
542TS, 542TSD
Degas® Tub Spout Series
Operation & Maintenance Manual
Installation Diverter Control
1
2
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
  • Page 1 1
  • Page 2 2

Symmons 542TS Installation guide

Category
Faucets
Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI