fantasticfurniture.com.au
Version 1.0
Arlo
Bunk Twin
Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au
Helpful bunk bed safety tips
Bunk beds should be checked periodically to ensure that the guardrail, ladder and other
components are secure and in the correct position and all connectors are tight.
We recommend that children under the age of nine (9) do not use the upper bunk. Children
should be discouraged from playing on the bunk bed.
No more than one occupant should use the upper bunk at any time (unless otherwise stated).
Bunk beds should be placed a minimum of 2 metres away from any ceiling fans to prevent any
injury to the upper bunk occupant.
Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3fantasticfurniture.com.au
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Headboard (P1);
Bottom Front
Side Rail (P3)
Bottom Back
Side Rail (P4)
Top Back
Side Rail (P5);
Top Front
Side Rail (P6);
Front Wood Guard Rail (P7);
Ladder (P8);
Parts list
Headboard (P1);
Footboard (P2);
Bottom Front Side Rail (P3);
Bottom Back Side Rail (P4);
Top Back Side Rail (P5);
Top Front Side Rail (P6);
Front Wood Guard Rail (P7);
Ladder (P8);
24 x Slats (P9);
Footboard (P2);
Page 4
fantasticfurniture.com.au
Hardware pack
4 x
Bolts
(H1)
44 x Medium
Bolts (H7)
7 x Long
Bolts
(H9)
1 x M6
Allen Key
(H3)
1 x M8
Allen
Key (H8)
Page 5fantasticfurniture.com.au
11
x
Brackets
(H4)
4 x
Flat
Washers (H6)
1 x
Connecting
Plate (H5)
Slats (P9)
96 x Screws
(H2)
1 x M8
Allen Key
(H8)
4
x
Brackets
(H4)
Step 1
Step 2
Page 6
fantasticfurniture.com.au
You will need
8 x Medium
Bolts (H7)
(H8)
(H7)
(H4)
(H7)
(P3)
(P2)
(P1) & (P2)
(P1)
(P1)
(H8)
(H7)
(P1)
(H7)
You will need
1 x M8
Allen Key
(H8)
22 x Medium
Bolts (H7)
Fix 2 x brackets (H4) to
the bottom front side rail
(P3) and bottom back side
rail (P4) with 8 x medium
bolts (H7) by tightening
with the allen key (H8).
Attach the 22 x medium bolts (H7)
into the headboard (P1) and
footboard (P2) by tightening with
the allen key (H8).
Do not fully tighten the bolts, and
ensure you leave a 8mm gap
between the head of the bolt and
the brackets on the side panels (P1
& P2).
x 2
8mm
Step 3
Page 7
fantasticfurniture.com.au
(H3)
(H1)
(P2)
(H7)
(H4)
(P3)
(P3)
(H7)
(P2)
8mm
(H7)
(H8)
(H7) (P1)
(H7)
(H4)
(P3)
(P1)
(P3)
8mm
You will need
1 x
Allen Key
(H8)
With assistance, attach the bottom front side rail (P3) to the
headboard (P1) and footboard (P2) by slotting the bracket on the side
rail (P3) over the bolts on the headboard (P1) and footboard (P2).
Repeat for the bottom back side rail (P4).
Do not fully tighten bolts until Step 9.
Step 5
Step 4
Page 8
fantasticfurniture.com.au
(H8)
(H7)
(P1)
(H7)
(H4)
(P5)
(P5)
(P5)
(H8)
(H7)
(H7) (H4)
(P5)
(P5)
(H7)
(P1)
(P2)
(P1)
8mm
(H8
(H7) (P2)
(H7)
(H4)
(P5)
(P2)
(P5) 8mm
1 x M8
Allen Key
(H8)
4
x
Brackets
(H4)
You will need
8 x Medium
Bolts (H7)
1 x M8
Allen Key
(H8)
You will need
8 x Medium
Bolts (H7)
Fix 4 x brackets (H4)
to top back side rail
(P5) with 8 x medium
bolts (H7) by
tightening with the
allen key (H8).
With assistance, attach the top back side rail (P5)
to the headboard (P1) and footboard (P2) by
slotting the bracket on the side rail (P5) over the
bolts on the headboard (P1) and footboard (P2).
Tighten 8 x medium bolts with the allen key (H8).
Do not fully tighten bolts until Step 9.
Step 6
Step 7
Page 9
fantasticfurniture.com.au
You will need
(H4)
(H8)
(H7)
(H7)
1 x
Allen Key
(H3)
(H3)
3 x Long
Bolts
(H9)
(H9)
(P6)
(P6)
(P6)
(P6)
(P7)
(P7)
1 x M8
Allen Key
(H8)
3
x
Brackets
(H4)
You will need
6 x Medium
Bolts (H7)
Fix the 3 x brackets (H4) to the top front side rail (P6) and front
wood guard rail (P7) with 6 x medium bolts (H7) by tightening with
the allen key (H8).
(P7)
Connect the front wood guard rail (P7)
and top front side rail (P6) with 3 x long
bolts (H9) by tightening with the allen
key
(H3).
Step 9
Step 8
Page 10
fantasticfurniture.com.au
1 x M8
Allen Key
(H8)
You will need
(H3)
(H1)
(P2)
(H7)
(H4)
(P6)
(P6)
(H7)
(H7)
(P2)
8mm
(H8) (H7) (P1)
(H7)
(H4)
(P6)
(P1)
(P6) 8mm
1 x M6
Allen Key
(H3)
You will need
4 x Short
Bolts
(H1) (P6)
(H5)
(H3)
(H1)
1 x
Connecting
Plate (H5)
With assistance, attach the top front side rail (P6) and the front wood guard rail (P7) to
the headboard (P1) and footboard (P2) by slotting the brackets on over the bolts on the
headboard (P1) and footboard (P2).
Tighten 6 x short bolts (H1) with the allen key (H8).
Attached the connecting plate (H5) to the front wood guard rail (P7) and top front side
rail (P6) from inside with 4 x short bolts (H1) by tightening with the allen key (H3).
Ensure all bolts on the bunk are fully tightened.
Step 10
Step 11
Page 11
fantasticfurniture.com.au
(H2)
(H2)
You will need
1 x M6
Allen Key
(H3)
4 x Long
Bolts
(H9)
You will need
Phillips head
screwdriver
96 x
Screws
(H2)
Fix the 24 x slats (P9) for the top bed and bottom bed side rails with 96 x screws (H2) by
tightening with a phillips head screwdriver.
Attach the ladder (P8) to
the bunk on the top
front side rail (P6) and
bottom front side rail
(P3) with 4 x long bolts
(H9) and 4 x flat washers
(H6) by tightening with
the allen key (H3) from
the inside as shown.
(P9)
(P9)
(P6)
(H3)
(H9)
4 x
Flat
Washers
(H6)
(H6)
(P8)
(P6)
(P3)
Page 12
fantasticfurniture.com.au
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
fantastic furniture ALOBUNTWIOOOFABBLS Assembly Instructions
- Type
- Assembly Instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI